Mopar 52113983AA Front Coil Spring

You can Select Your Vehicle to check if 52113983AA fits your vehicle.

To begin removing the coil spring on models with a solid front axle, start by loosening the front wheel lug nuts. Then, raise the front of the vehicle and securely support it on jackstands positioned under the frame rails. Following this, proceed to remove the wheels.

Place a jack under the rear axle to support its weight, remove the bolt from the lower shock absorber mount, and slowly lower the jack until the spring and insulator can be pulled out.

During the installation of the coil spring, start by placing the insulator on top of the coil spring. Install the top of the spring into the spring pocket and the bottom of the spring into the lower control arm. After this, reconnect the lower control arm to the steering knuckle. Following the successful installation of the coil spring, you can remove the spring compressor. The rest of the installation process should follow the reverse of the removal steps. Make sure to tighten all fasteners to their proper torque values and also tighten the wheel lug nuts. Lastly, it's advisable to have the front end alignment checked and adjusted if necessary.

Place a jack under the rear axle to support its weight, remove the bolt from the lower shock absorber mount, and slowly lower the jack until the spring and insulator can be pulled out.

Certainly. After separating the lower control arm from the steering knuckle, lift the knuckle and hub assembly upward. Then, place a block of wood between the upper control arm and the frame. This action supports the assembly and keeps it out of the way for further steps.

Reverse the removal process and tighten all fasteners.

FRONT springs=52113983AA(L) , 52113984AA(R) shocks=5086591AGB (X2) REAR shocks=52113677AE (X2)