Mopar 52121619AA Front Coil Spring

You can Select Your Vehicle to check if 52121619AA fits your vehicle.

Reverse the removal process and tighten all fasteners.

Reverse the removal process and tighten all fasteners.

After raising the vehicle and securely supporting it on jackstands, remove the wheels. Then, use floor jacks to support the end of the axle from which you're removing the spring. Install a coil spring compressor on the coil spring and slightly compress the spring. Following this, remove the upper suspension arm and loosen the lower suspension arm nuts and pivot bolts. Additionally, mark and disconnect the front driveshaft from the front axle. Disconnect the track bar from the frame rail bracket, the drag link from the Pitman arm, and the stabilizer bar link from the axle. Finally, disconnect the shock absorber from the axle and lower the axle until the coil spring is free for removal.

Once the knuckle and hub assembly is supported by the block of wood, you should lower the floor jack. This will allow you to guide the compressed coil spring out from its position.