Make sure this part fits

Mopar 5272628AE Front Coil Spring

2007-2014 Mopar 5272628AE

Customer Questions & Expert Answers (7)
Mopar 5272628AE Front Coil Spring
  • Part Description
    Spring-Front Coil
  • Position
    Front
  • Replaces
    5272628AD, 5272628AC
  • Manufacturer
    Mopar
Make sure this part fits
$65.60 MSRP: $98.50
You Save: $32.90 (34%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Mopar
    Manufacturer Part Number5272628AE
    Part DescriptionSpring-Front Coil
    Other NamesSpring
    Item Dimensions14.3 x 6.4 x 6.4 inches
    Item Weight6.90 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces5272628AD, 5272628AC
    ManufacturerMopar
    SKU5272628AE
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2011-2014 Chrysler 2004 Cyl 2.4L, 6 Cyl 3.6LLimited Convertible, Limited Sedan, LX Convertible, LX Sedan, S Convertible, S Sedan, Touring Convertible, Touring Sedan
    2007-2010 Chrysler Sebring4 Cyl 2.4L, 6 Cyl 2.7L, 6 Cyl 3.5LLimited Convertible, Limited Sedan, LX Convertible, LX Sedan, Touring Convertible, Touring Sedan
    2007-2014 Dodge Avenger4 Cyl 2.4L, 6 Cyl 2.7L, 6 Cyl 3.5L, 6 Cyl 3.6LExpress, Heat, LUX, Mainstreet, R/T AWD, R/T FWD, SE, SXT, SXT Plus
  • Customer Questions & Expert Answers

    Q:
    Will this fit my truck? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 5272628AE fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    How can the damper shaft nut be removed for the 2017 Chrysler 200? Posted by Customer
    A:
    Hold the damper shaft with a wrench and remove the damper shaft nut.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    How do you disassemble the strut and spring assembly for the 2013 Chrysler 200? Posted by Customer
    A:
    To disassemble the strut and spring assembly, you need to mount the strut clevis bracket portion in a vise and mark the components for reassembly. Then, install a spring compressor on the spring and compress it to relieve pressure from the upper mount. While holding the damper shaft, loosen the shaft nut with a socket. Remove the nut and upper mount, inspecting the pivot bearing and upper spring seat for damage. Lift the compressed spring from the assembly and remove the dust boot from the damper shaft. Slide the rubber bumper off the damper shaft and check the lower spring isolator for damage.
    Posted by MoparPartsGiant Specialist
    Q:
    What are the initial steps for removing the shock absorber for the 2014 Chrysler 200? Posted by Customer
    A:
    For 2015 and later models, the initial steps involve raising the rear of the vehicle and supporting it on jackstands, removing the wheels, and removing the rear fenderwell splash shield.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you disassemble the strut and spring assembly for the 2014 Dodge Avenger? Posted by Customer
    A:
    To disassemble the strut and spring assembly, you need to mount the strut clevis bracket portion in a vise and mark the components for reassembly. Then, install a spring compressor on the spring and compress it to relieve pressure from the upper mount. While holding the damper shaft, loosen the shaft nut with a socket. Remove the nut and upper mount, inspecting the pivot bearing and upper spring seat for damage. Lift the compressed spring from the assembly and remove the dust boot from the damper shaft. Slide the rubber bumper off the damper shaft and check the lower spring isolator for damage.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    How should the knuckle be supported during shock absorber removal for the 2011 Dodge Avenger? Posted by Customer
    A:
    A floor jack should be used to support the knuckle and raise it slightly.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the next step after releasing tension from the spring for the 2008 Dodge Avenger? Posted by Customer
    A:
    Install the shock absorber/coil spring assembly.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 5272628AE, the Right Choice

To ensure reliability, purchase Mopar part # 5272628AE Front Coil Spring. It is sometimes referred to as Mopar Coil Springs. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler 200, Sebring models. It fits Dodge Avenger.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 5272628AE Front Coil Spring. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Dodge parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly