Make sure this part fits

Mopar 5151703AC Rear Coil Spring

2007-2010 Mopar 5151703AC

Customer Questions & Expert Answers (7)
Mopar 5151703AC Rear Coil Spring
  • Part Description
    Spring-Rear Coil
  • Position
    Rear
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Mopar
    Manufacturer Part Number5151703AC
    Part DescriptionSpring-Rear Coil
    Other NamesCoil Spring, Spring
    Item Dimensions16.0 x 7.3 x 7.1 inches
    Item Weight5.60 Pounds
    PositionRear
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerMopar
    SKU5151703AC
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2007-2010 Chrysler Sebring4 Cyl 2.4L, 6 Cyl 2.7L, 6 Cyl 3.5LLimited Sedan, LX Sedan, Touring Sedan
    2007-2010 Dodge Avenger4 Cyl 2.4L, 6 Cyl 2.7L, 6 Cyl 3.5LExpress, Heat, R/T FWD, SE, SXT
  • Customer Questions & Expert Answers

    Q:
    Will this fit my truck? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 5151703AC fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you disassemble the strut and spring assembly for the 2008 Chrysler Sebring? Posted by Customer
    A:
    To disassemble the strut and spring assembly, you need to mount the strut clevis bracket portion in a vise and mark the components for reassembly. Then, install a spring compressor on the spring and compress it to relieve pressure from the upper mount. While holding the damper shaft, loosen the shaft nut with a socket. Remove the nut and upper mount, inspecting the pivot bearing and upper spring seat for damage. Lift the compressed spring from the assembly and remove the dust boot from the damper shaft. Slide the rubber bumper off the damper shaft and check the lower spring isolator for damage.
    Posted by MoparPartsGiant Specialist
    Q:
    After removing the trim panels, what are the next steps in the procedure for the 2007 Chrysler Sebring? Posted by Customer
    A:
    After removing the trim panels, the rear wheel lug nuts should be loosened, the vehicle should be raised and supported on jackstands, and the rear wheels should be removed.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the next step after releasing tension from the spring for the 2007 Chrysler Sebring? Posted by Customer
    A:
    Install the shock absorber/coil spring assembly.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What should be done after removing the old shock for the 2011 Dodge Avenger? Posted by Customer
    A:
    Remove the shock through the bottom of the spring and inspect all parts for damage. Install the parts on the new shock in the correct order. Install the washer and damper shaft nut, tightening it while holding the damper shaft with a wrench.
    Posted by MoparPartsGiant Specialist
    Q:
    What are some signs of wear that may indicate a problem with the struts or coil springs for the 2008 Dodge Avenger? Posted by Customer
    A:
    Some signs of wear include leaking fluid, loss of damping capability, and chipped, sagging, or cracked coil springs.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    After removing the trim panels, what are the next steps in the procedure for the 2009 Dodge Avenger? Posted by Customer
    A:
    After removing the trim panels, the rear wheel lug nuts should be loosened, the vehicle should be raised and supported on jackstands, and the rear wheels should be removed.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 5151703AC, the Right Choice

To ensure reliability, purchase Mopar part # 5151703AC Rear Coil Spring. It is sometimes referred to as Mopar Coil Springs. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler Sebring models. It fits Dodge Avenger.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 5151703AC Rear Coil Spring. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Dodge parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly