Mopar 5168720AA Rear Coil Spring

You can Select Your Vehicle to check if 5168720AA fits your vehicle.

If you plan on removing the springs and overhauling the shock unit, follow the appropriate procedures.

To reassemble the strut and spring assembly, you need to extend the damper rod and install the rubber bumper. Put the dust boot onto the damper and carefully place the coil spring onto the damper, aligning it with the reference marks made during disassembly. Install the upper spring isolator and seat, followed by the upper mount, and tighten the nut on the damper shaft. Loosen the coil spring compressor until the top coil is properly seated against the upper spring seat and upper mount. Finally, remove the tool from the coil spring and install the strut/spring assembly.

If servicing both shocks, mark the parts as right and left.