Mopar 68231596AB Rear Coil Spring

You can Select Your Vehicle to check if 68231596AB fits your vehicle.

If equipped, the trim panels covering the lower control arm should also be removed.

To disassemble the strut and spring assembly, you need to mount the strut clevis bracket portion in a vise and mark the components for reassembly. Then, install a spring compressor on the spring and compress it to relieve pressure from the upper mount. While holding the damper shaft, loosen the shaft nut with a socket. Remove the nut and upper mount, inspecting the pivot bearing and upper spring seat for damage. Lift the compressed spring from the assembly and remove the dust boot from the damper shaft. Slide the rubber bumper off the damper shaft and check the lower spring isolator for damage.

If servicing both shocks, mark the parts as right and left.