Mopar 68091433AD Support-Engine

You can Select Your Vehicle to check if 68091433AD fits your vehicle.

Remove the bolt to separate the front engine mount from the block, noting that the starter must be removed for access.

1. Remove the load on the engine mounts by carefully supporting the engine and transaxle assembly with a floor jack. 2. Loosen the right insulator vertical fasteners and the front engine mount bracket-to-front crossmember bolts and nuts. 3. The left engine mount insulator is sleeved over the shaft and long support bolt to provide lateral movement adjustment. 4. Pry the engine right or left as required to achieve the proper driveaxle length. 5. Securely tighten the right engine mount insulator vertical bolts, the front engine mount bolts and nuts, and center the left engine mount insulator. 6. Finally, recheck the driveaxle length.