Mopar 4809739AE Fuel Tank

You can Select Your Vehicle to check if 4809739AE fits your vehicle.

Installation is the reverse of removal. Be sure to tighten the fuel tank strap bolts securely. When you're done, start the engine and check for leaks at any fuel line connectors that you disconnected.

Cleaning the fuel tank (due to fuel contamination) should be performed by a professional with the proper training to carry out this critical and potentially dangerous work.

Repairs to the fuel tank or filler neck should be carried out by a professional with experience in this critical and potentially dangerous work.

The procedure for removing a fuel tank is much easier if the tank is empty. If the tank has a drain plug, remove it and drain the fuel into an approved container. If not, use a siphoning kit to remove the fuel. Start by relieving the tank pressure by removing the filler cap. Then, relieve the fuel system pressure and detach the battery cable. Raise the vehicle and secure it on jackstands. Disconnect the fuel lines and fuel filler tube, making sure to label them if needed. If there is no drain plug, siphon the fuel from the fuel feed line. Support the tank with a floor jack and disconnect the tank retaining straps. Lower the tank to disconnect the electrical connectors from the fuel gauge and pump. Finally, remove the tank from the vehicle.