Make sure this part fits

Mopar 5135173AE Fuel Tank

2007-2009 Mopar 5135173AE

Customer Questions & Expert Answers (8)
Mopar 5135173AE Fuel Tank
  • Part Description
    Tank-Fuel
  • Replaced By
    68051910AB
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Mopar
    Manufacturer Part Number5135173AE
    Part DescriptionTank-Fuel
    Item Dimensions46.7 x 32.3 x 14.0 inches
    Item Weight30.00 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerMopar
    SKU5135173AE
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2007-2009 Chrysler 3006 Cyl 2.7L, 6 Cyl 3.5L, 8 Cyl 5.7LBase RWD, C AWD, C RWD, Limited AWD, Limited RWD, LX RWD, Touring AWD, Touring RWD
    2009 Dodge Challenger6 Cyl 3.5L, 8 Cyl 5.7LR/T, SE
    2007-2009 Dodge Charger6 Cyl 2.7L, 6 Cyl 3.5L, 8 Cyl 5.7LBase AWD, Base RWD, R/T AWD, R/T RWD, SXT AWD, SXT RWD
    2007-2008 Dodge Magnum6 Cyl 2.7L, 6 Cyl 3.5L, 8 Cyl 5.7LR/T AWD, R/T RWD, SE RWD, SXT AWD, SXT RWD
  • Customer Questions & Expert Answers

    Q:
    Will this fit my truck? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 5135173AE fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you proceed with removing the fuel tank for the 2006 Chrysler 300? Posted by Customer
    A:
    To remove the fuel tank:Support the fuel tank.Remove the fuel tank retaining strap bolts and both retaining straps.Carefully lower the fuel tank just enough to pull the fuel tank filler neck vent line through the gap between the floorpan and the left end of the rear suspension crossmember.Pull the EVAP vent line through the gap between the floorpan and the right end of the suspension crossmember.Ensure that everything is disconnected from the upper part of the tank before slowly lowering it.
    Posted by MoparPartsGiant Specialist
    Q:
    Who should clean the fuel tank due to fuel contamination for the 2006 Chrysler 300? Posted by Customer
    A:
    It should be done by a professional with proper training.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Fuel Tank
    Q:
    What do you need to do to remove the fuel tank for the 2014 Dodge Challenger? Posted by Customer
    A:
    Disconnect the fuel filler neck hose and remove the under-body splash shields. Remove the exhaust pipe(s) and the driveshaft, and if equipped, remove the heat shield from under the vehicle. Support the fuel tank, remove the fuel tank retaining strap bolts, and lower the fuel tank carefully, making sure all connections are disconnected.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Fuel Tank
    Q:
    What additional steps are needed before removing the fuel tank for the 2009 Dodge Charger? Posted by Customer
    A:
    Before removing the fuel tank:Remove the under-body splash shields.Loosen the hose clamps for the fuel filler neck hose and disconnect the fuel filler neck pipe from the hose.Remove the exhaust pipe(s) and the driveshaft.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Fuel Tank
    Q:
    Who should clean the fuel tank due to fuel contamination for the 2006 Dodge Charger? Posted by Customer
    A:
    It should be done by a professional with proper training.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Fuel Tank
    Q:
    Is the fuel tank in the 2008 Dodge Magnum covered by repairable? Posted by Customer
    A:
    No, it must be replaced if it becomes damaged.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Fuel Tank
    Q:
    What components should be removed before accessing the fuel pump and filter for the 2006 Dodge Magnum? Posted by Customer
    A:
    Before accessing the fuel pump and filter:Remove the lower cushion from the back seat.Remove the loam pad covering the access covers for the fuel pump/fuel level sensor module and the fuel filter/fuel pressure regulator/fuel level sensor.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 5135173AE, the Right Choice

To ensure reliability, purchase Mopar part # 5135173AE Fuel Tank. It is sometimes referred to as Mopar Fuel Tank. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler 300 models. It fits Dodge Challenger, Charger, Magnum.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 5135173AE Fuel Tank. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Dodge parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly