Mopar 5085614AC Tube-Brake

You can Select Your Vehicle to check if 5085614AC fits your vehicle.

When replacing a flexible brake hose, follow these steps:Clean dirt from the hose and line fittings.Disconnect the metal brake line from the hose fitting using a flare-nut wrench, and plug the metal line to prevent leakage and contamination.Remove the clip retaining the brake hose to the bracket and the bolt retaining the brake hose bracket to the strut.Unscrew the banjo bolt at the caliper and remove the hose, discarding the sealing washers.Attach the new brake hose to the caliper, using new sealing washers, and tighten the banjo bolt to the specified torque.Attach the brake hose bracket to the strut, ensuring the hose isn't kinked or twisted.Connect the hose to the chassis bracket, and install the retaining clip.Reconnect the metal line to the hose fitting, tightening it securely.Repeat the same steps for rear brake hose replacement.

To inspect brake hoses, securely raise the vehicle on jackstands and thoroughly examine the rubber hoses connecting the steel brake lines with the front and rear brake assemblies. Check for signs of damage such as cracks, chafing, leaks, blisters, and other issues. A light and mirror can aid in a comprehensive inspection.