Mopar 4343766 Valve Crankcase Vent

You can Select Your Vehicle to check if 4343766 fits your vehicle.

To check the PCV valve, pull it out and place finger over inlet. A strong vacuum and hissing noise should be felt and heard if operating properly. To replace, pull from hose and install new one. Inspect hose and compare new valve with old to ensure same.

To replace the air filter element, follow these steps: Loosen the clamps on the hose between the air cleaner housing and the throttle body. Release the air cleaner clips and pull the hose off the throttle body. Lift the cover and hose off the housing. On non-turbocharged models, the cover can be rotated up without disconnecting the hose. Lift the air filter element out of the housing. On turbocharged models, the filter element can be lifted out of the housing after completely removing the cover. On non-turbocharged models, the cover can be rotated away from the filter after loosening the hose clamp. To check the filter, hold it up to sunlight or place a flashlight behind the element. If you can see light coming through the paper element, the filter is usable. Replace the PCV filter element if it is dirty. Clean the inside of the air cleaner housing with a rag. Place the old filter (if in good condition) or the new filter (if the specified interval has elapsed) into the air cleaner housing with the screen facing up. Ensure it seats properly in the bottom of the housing. If the hose was removed from the throttle body, loosely install the clamp and then push the hose onto the throttle body. Align the upper and lower halves of the air cleaner housing and connect the clips. Tighten the clamp around the hose at the throttle body securely.

With the engine idling, pull the valve (with the hose attached) from the rubber fitting. On V6 models, detach the hose, unscrew the valve, then reconnect the hose. Place your finger over the valve opening.

The PCV system consists of rubber hoses and a small, replaceable metering valve.

Replacing the air filter element and PCV valve at specified intervals is essential for maintaining the vehicle's performance and preventing issues. Over time, these components can become dirty or clogged, affecting air intake and crankcase ventilation. Regular replacement ensures proper engine operation.

The PCV system reduces hydrocarbon emissions by scavenging vapors from the crankcase by circulating fresh air from the air cleaner through the crankcase, where it mixes with blow-by gases and is then rerouted through a PCV valve to the intake manifold.