Genuine Chrysler 300 Engines

Other Name: CAMSHSFT-Engine

Stage 2 Performance Camshaft with phase limiter: The Mopar® performance camshaft P5160018 is based on the popular COMP series of camshafts with slightly modified cam timing to increase low-end torque without sacrificing high-end power (thanks to an optimized VCT calibration). The cam measures 222/230 at 0.050 (270/282 at 0.006) and has just under 0.600 lift with a 115 degree lobe separation angle.This part is designed and intended solely for use in competition vehicles driven on tracks or off-road. Vehicles equipped with this part should not be driven on public roads or highways.Mopar customers are responsible for ensuring that their use of their vehicle equipped with this part complies with applicable federal, state/provincial, and local laws, regulations, and ordinances. Vehicles equipped with this part and driven on public roads or highways may violate U.S., California, Canadian, or local motor vehicle emissions laws and regulations.

Other Name: Spring-Valve

Performance Valve Springs - GEN III HEMI® (5.7L/6.4L) : Made from the same high-strength material as the valve springs found in the Dodge Viper, the Mopar® Performance Valve Spring was designed for high lift camshaft profiles (up to 0.625 lift) such as the Mopar® Performance 5.7L Cam (part number P5160018). This spring will work with the factory seats, retainers, and locks and require no shims or machining of the cylinder head (Shims required for 6.4L application).