How to remove and install the front and rear bumper covers on Chrysler 200?

Disconnect the negative battery cable from the remote ground terminal or battery before beginning. On 2015 and later models, there are upper and lower plastic covers that need to be removed before all of the mounting bolts can be accessed. To remove the front bumper cover, release the hood latch and open the hood. Remove the fasteners attaching the grille to the radiator support. On 2014 and earlier models, remove the bolts holding the bumper cover to the headlight mounting panel at each side of the grille. Loosen the front wheel lug nuts, then raise the vehicle and support it securely on jackstands. Remove the front wheels. Remove the front inner fender splash shield fasteners as necessary to gain access to the front cover-to-fender bolts. Remove the fasteners securing the bottom of the bumper cover. Disconnect the fog light electrical connectors, if necessary. Disconnect the side marker light electrical connectors. Carefully remove the bumper cover from the vehicle. Installation is the reverse of removal. To remove the rear bumper cover, open the trunk. Raise the vehicle and support it securely on jackstands. Remove the upper mounting fasteners. Remove the fasteners securing the bottom of the bumper cover. Release the hooks on the sides of the bumper cover from the tabs in the rear cover brackets. Carefully remove the rear bumper cover from the vehicle. Installation is the reverse of removal.

Genuine Chrysler 200 Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

25 Bumpers found

View related parts
Chrysler 200 Front Upper Bumper Cover
Part Number: 1WZ18TZZAD
$433.02 MSRP: $630.00
You Save: $196.98 (32%)
ADD TO CART
Product Specifications
- Other Name: Fascia-Front Upper
- Position: Front Upper
- Replaced by: 1WZ18TZZAE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2017 Chrysler 200 | C AWD, C FWD, Limited, LX, S AWD, S FWD | 4 Cyl 2.4L, 6 Cyl 3.6L
View related parts
Chrysler 200 Rear Bumper Cover Lower
Part Number: 68203103AB
$119.32 MSRP: $238.00
You Save: $118.68 (50%)
ADD TO CART
Product Specifications
- Other Name: Fascia-Rear Lower
- Position: Rear Lower
- Replaced by: 68203103AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016-2017 Chrysler 200 | C AWD, C FWD, Limited, LX, S AWD, S FWD | 4 Cyl 2.4L, 6 Cyl 3.6L
View related parts
Chrysler 200 Rear Bumper Cover Lower
Part Number: 68203103AA
$119.32 MSRP: $238.00
You Save: $118.68 (50%)
ADD TO CART
Product Specifications
- Other Name: Fascia-Rear Lower
- Replaced by: 68203103AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015 Chrysler 200 | C AWD, C FWD, Limited, LX, S AWD, S FWD | 4 Cyl 2.4L, 6 Cyl 3.6L
View related parts
Chrysler 200 Rear Primered Upper Bumper Cover
Part Number: 68084893AA
$487.56 MSRP: $871.00
You Save: $383.44 (45%)
ADD TO CART
Product Specifications
- Other Name: Fascia Rear Upper Primed
- Replaced by: 68084893AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011 Chrysler 200 | Limited Convertible, LX Convertible, S Convertible, Touring Convertible | 4 Cyl 2.4L, 6 Cyl 3.6L
View related parts
Chrysler 200 Rear Primered Upper Bumper Cover
Part Number: 68084893AC
$487.56 MSRP: $871.00
You Save: $383.44 (45%)
ADD TO CART
Product Specifications
- Other Name: Fascia Rear Upper Primed
- Position: Rear Upper
- Replaced by: 68084893AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2014 Chrysler 200 | Limited Convertible, LX Convertible, S Convertible, Touring Convertible | 4 Cyl 2.4L, 6 Cyl 3.6L
View related parts
Chrysler 200 Rear Bumper Cover Lower
Part Number: 68082034AA
$119.26 MSRP: $206.00
You Save: $86.74 (43%)
ADD TO CART
Product Specifications
- Other Name: Fascia-Rear Lower
- Replaced by: 68082034AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011 Chrysler 200 | Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, S Convertible, S Sedan, Touring Convertible, Touring Sedan | 4 Cyl 2.4L, 6 Cyl 3.6L
View related parts
Chrysler 200 Rear Bumper Cover Lower
Part Number: 68082034AB
$119.26 MSRP: $206.00
You Save: $86.74 (43%)
ADD TO CART
Product Specifications
- Other Name: Fascia-Rear Lower
- Position: Rear Lower
- Replaced by: 68082034AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2014 Chrysler 200 | Limited Convertible, Limited Sedan, LX Sedan, S Convertible, S Sedan, Touring Convertible, Touring Sedan | 4 Cyl 2.4L, 6 Cyl 3.6L
View related parts
Chrysler 200 Rear Bumper Cover Lower
Part Number: 68229895AB
$73.26 MSRP: $126.00
You Save: $52.74 (42%)
ADD TO CART
Product Specifications
- Other Name: Fascia-Rear Lower
- Replaced by: 68229895AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016-2017 Chrysler 200 | C AWD, C FWD, Limited, LX, S AWD, S FWD | 4 Cyl 2.4L, 6 Cyl 3.6L
View related parts
Chrysler 200 Rear Primered Upper Bumper Cover
Part Number: 68082030AA
$388.20 MSRP: $585.00
You Save: $196.80 (34%)
ADD TO CART
Product Specifications
- Other Name: Fascia Rear Upper Primed
- Replaced by: 68082030AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011 Chrysler 200 | Limited Sedan, LX Sedan, S Sedan, Touring Sedan | 4 Cyl 2.4L, 6 Cyl 3.6L
View related parts
Chrysler 200 Rear Primered Upper Bumper Cover
Part Number: 68082030AD
$388.20 MSRP: $585.00
You Save: $196.80 (34%)
ADD TO CART
Product Specifications
- Other Name: Fascia Rear Upper Primed
- Replaced by: 68082030AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2014 Chrysler 200 | Limited Convertible, Limited Sedan, LX Sedan, S Convertible, S Sedan, Touring Convertible, Touring Sedan | 4 Cyl 2.4L, 6 Cyl 3.6L
View related parts
Chrysler 200 Rear Upper Bumper Cover
Part Number: 1UW74TZZAD
$520.80 MSRP: $759.00
You Save: $238.20 (32%)
ADD TO CART
Product Specifications
- Other Name: FASCIA-Rear Upper
- Position: Rear Upper
- Replaced by: 1UW74TZZAE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2017 Chrysler 200 | C AWD, C FWD, Limited, LX, S AWD, S FWD | 4 Cyl 2.4L, 6 Cyl 3.6L
View related parts
Chrysler 200 Rear Bumper Cover Lower
Part Number: 68103925AC
$80.16 MSRP: $116.00
You Save: $35.84 (31%)
ADD TO CART
Product Specifications
- Other Name: Fascia-Rear Lower
- Position: Rear Lower
- Replaced by: 68103925AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2017 Chrysler 200 | C AWD, C FWD, Limited, LX, S AWD, S FWD | 4 Cyl 2.4L, 6 Cyl 3.6L
View related parts
Chrysler 200 Front Primered Bumper Cover
Part Number: 68082047AD
$420.48 MSRP: $613.00
You Save: $192.52 (32%)
ADD TO CART
Product Specifications
- Other Name: Fascia-Front
- Position: Front
- Replaced by: 68082047AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2013-2014 Chrysler 200 | Limited Convertible, Limited Sedan, LX Sedan, S Convertible, Touring Convertible, Touring Sedan | 4 Cyl 2.4L, 6 Cyl 3.6L
View related parts
Chrysler 200 Rear Bumper Cover Lower
Part Number: 68229895AA
$58.30 MSRP: $126.00
You Save: $67.70 (54%)
ADD TO CART
Product Specifications
- Other Name: Fascia-Rear Lower
- Position: Rear Lower
- Replaced by: 68229895AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015 Chrysler 200 | C AWD, C FWD, Limited, LX, S AWD, S FWD | 4 Cyl 2.4L, 6 Cyl 3.6L
View related parts
Chrysler 200 Front Upper Bumper Cover
Part Number: 5SH88TZZAB
$463.80 MSRP: $675.00
You Save: $211.20 (32%)
ADD TO CART
Product Specifications
- Other Name: Fascia-Front Upper
- Position: Front Upper
- Replaced by: 5SH88TZZAC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2017 Chrysler 200 | C AWD, C FWD, Limited, LX, S AWD, S FWD | 4 Cyl 2.4L, 6 Cyl 3.6L
View related parts
Chrysler 200 Rear Upper Bumper Cover
Part Number: 5NH89TZZAD
$520.80 MSRP: $759.00
You Save: $238.20 (32%)
ADD TO CART
Product Specifications
- Other Name: FASCIA-Rear Upper
- Replaced by: 5NH89TZZAE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2017 Chrysler 200 | C AWD, C FWD, Limited, LX, S AWD, S FWD | 4 Cyl 2.4L, 6 Cyl 3.6L
View related parts
Chrysler 200 Rear Bumper Cover Lower
Part Number: 68082035AA
$140.84 MSRP: $206.00
You Save: $65.16 (32%)
ADD TO CART
Product Specifications
- Other Name: Fascia-Rear Lower
- Replaced by: 68082035AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011 Chrysler 200 | Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, S Convertible, S Sedan, Touring Convertible, Touring Sedan | 4 Cyl 2.4L, 6 Cyl 3.6L
View related parts
Chrysler 200 Rear Bumper Cover Lower
Part Number: 68082035AB
$140.84 MSRP: $206.00
You Save: $65.16 (32%)
ADD TO CART
Product Specifications
- Other Name: Fascia-Rear Lower
- Position: Rear Lower
- Replaced by: 68082035AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2014 Chrysler 200 | Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, S Convertible, S Sedan, Touring Convertible, Touring Sedan | 4 Cyl 2.4L, 6 Cyl 3.6L
View related parts
Chrysler 200 Front Bumper Cover
Part Number: 68082047AA
$420.48 MSRP: $613.00
You Save: $192.52 (32%)
ADD TO CART
Product Specifications
- Other Name: Fascia Front Includes Absorber
- Position: Front
- Replaced by: 68082047AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011 Chrysler 200 | Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, S Convertible, S Sedan, Touring Convertible, Touring Sedan | 4 Cyl 2.4L, 6 Cyl 3.6L
View related parts
Chrysler 200 Front Bumper Cover
Part Number: 68082047AB
$420.48 MSRP: $613.00
You Save: $192.52 (32%)
ADD TO CART
Product Specifications
- Other Name: Fascia Front Includes Absorber
- Replaced by: 68082047AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011 Chrysler 200 | Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, S Convertible, S Sedan, Touring Convertible, Touring Sedan | 4 Cyl 2.4L, 6 Cyl 3.6L

| Page 1 of 2 |Next >

1-20 of 25 Results

Chrysler 200 Bumper

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler 200 Bumper at great affordable prices. Moreover, all genuine Chrysler 200 Bumper come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Chrysler 200 Bumper Parts Questions & Experts Answers

Front Upper Bumper Cover
1WZ18TZZAD
Q: How to remove and install the front and rear bumper covers on Chrysler 200?
A: Disconnect the negative battery cable from the remote ground terminal or battery before beginning. On 2015 and later models, there are upper and lower plastic covers that need to be removed before all of the mounting bolts can be accessed. To remove the front bumper cover, release the Hood Latch and open the hood. Remove the fasteners attaching the grille to the radiator support. On 2014 and earlier models, remove the bolts holding the bumper cover to the headlight mounting panel at each side of the grille. Loosen the front wheel lug nuts, then raise the vehicle and support it securely on jackstands. Remove the front wheels. Remove the front inner fender splash shield fasteners as necessary to gain access to the front cover-to-fender bolts. Remove the fasteners securing the bottom of the bumper cover. Disconnect the fog light electrical connectors, if necessary. Disconnect the side marker light electrical connectors. Carefully remove the bumper cover from the vehicle. Installation is the reverse of removal. To remove the rear bumper cover, open the trunk. Raise the vehicle and support it securely on jackstands. Remove the upper mounting fasteners. Remove the fasteners securing the bottom of the bumper cover. Release the hooks on the sides of the bumper cover from the tabs in the rear cover brackets. Carefully remove the rear bumper cover from the vehicle. Installation is the reverse of removal.

Related Chrysler 200 Parts

Browse by Year

2017 Bumper 2016 Bumper 2015 Bumper 2014 Bumper 2013 Bumper 2012 Bumper 2011 Bumper