Mopar 1UW74TZZAD Rear Upper Bumper Cover

You can Select Your Vehicle to check if 1UW74TZZAD fits your vehicle.

Release the hood latch and open the hood. Remove the fasteners attaching the grille to the radiator support. On 2014 and earlier models, remove the bolts holding the bumper cover to the headlight mounting panel at each side of the grille. Loosen the front wheel lug nuts, then raise the vehicle and support it securely on jackstands. Remove the front wheels. Remove the front inner fender splash shield fasteners as necessary to gain access to the front cover-to-fender bolts. Remove the fasteners securing the bottom of the bumper cover. Disconnect the fog light electrical connectors, if necessary. Disconnect the side marker light electrical connectors. Carefully remove the bumper cover from the vehicle.