How do you replace the rear main oil seal in 2.7L V6 engine on Chrysler 200?

All models employ a one piece rear Crankshaft Seal mounted in a bolt-in housing and the only way to change this seal is to remove the transaxle and drive plate. The rear Crankshaft Seal and housing are considered as the seal and its housing, and they are serviced together; this calls for several tools. The first takes involves the separation of the transaxle, the oil pan as well as the driveplate. Subsequently, undo the rear Crankshaft Seal housing bolts and this housing. Wipe the crankshaft with clean oil and then place the new oil seal housing on the crankshaft, do not take off the protector that comes with the seal and housing until it is time to install the fully, as it will be used to push out when necessary to fit the oil seal protector. Once more the oil seal housing is bolted to the crankshaft and the bolts are slightly tightened proper alignment tools are secured on the oil pan rails. When applying the pressure on the oil seal housing, fasten the oil seal housing retainer bolts to the prescribed torque and make sure that the housing sits perfectly flat with the oil pan mating surface of the engine so as to avoid oil leaks. As for the rest of the installation, it is done in the reverse order to the removal.

Genuine Chrysler 200 Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Crankshaft Seals found

View related parts
Chrysler 200 Cover-CRANKSHAFT Rear Oil
Part Number: 68223854AA
$94.25 MSRP: $144.00
You Save: $49.75 (35%)
ADD TO CART
Product Specifications
- Other Name: RETAINER And Seal Crankshaft Rear Oil; Rear Main Seal Retainer
- Replaces: 5184285AG, 68078786AA, 68152024AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2017 Chrysler 200 | C AWD, C FWD, LX, LX Sedan, Limited, Limited Convertible, Limited Sedan, S AWD, S Convertible, S FWD, S Sedan, Touring Convertible, Touring Sedan | 6 Cyl 3.6L
View related parts
Chrysler 200 Seal-CRANKSHAFT Oil
Part Number: 2142125000
$21.51 MSRP: $31.85
You Save: $10.34 (33%)
ADD TO CART
Product Specifications
- Other Name: Seal Crankshaft Oil Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2017 Chrysler 200 | C FWD, Limited, Limited Sedan, LX, LX Convertible, LX Sedan, S FWD, Touring Convertible, Touring Sedan | 4 Cyl 2.4L
View related parts
Chrysler 200 Cover-CRANKSHAFT Rear Oil
Part Number: 68078786AA
$95.03 MSRP: $144.00
You Save: $48.97 (35%)
ADD TO CART
Product Specifications
- Other Name: RETAINER And Seal Crankshaft Rear Oil
- Replaced by: 68223854AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014 Chrysler 200 | LX Sedan, Limited Convertible, Limited Sedan, S Convertible, Touring Convertible, Touring Sedan | 6 Cyl 3.6L
- 2011-2012 Chrysler 200 | LX Sedan, Limited Convertible, Limited Sedan, S Convertible, S Sedan, Touring Convertible, Touring Sedan | 6 Cyl 3.6L
View related parts
Chrysler 200 Cover-CRANKSHAFT Rear Oil
Part Number: 5184285AG
$95.03 MSRP: $144.00
You Save: $48.97 (35%)
ADD TO CART
Product Specifications
- Other Name: RETAINER And Seal Crankshaft Rear Oil
- Position: Rear
- Replaced by: 68223854AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2013 Chrysler 200 | Limited Convertible, Limited Sedan, LX Sedan, S Convertible, Touring Convertible, Touring Sedan | 6 Cyl 3.6L
View related parts
Chrysler 200 Seal-CRANKSHAFT Oil
Part Number: 5047167AA
$4.68 MSRP: $6.80
You Save: $2.12 (32%)
ADD TO CART
Product Specifications
- Other Name: Seal Crankshaft Oil Rear; Rear Main Seal, Rear Seal
- Replaces: 2144325000
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2017 Chrysler 200 | C FWD, Limited, Limited Sedan, LX, LX Convertible, LX Sedan, S FWD, Touring Convertible, Touring Sedan | 4 Cyl 2.4L
View related parts
Chrysler 200 Seal-CRANKSHAFT Oil
Part Number: 68079589AA
$19.12 MSRP: $27.80
You Save: $8.68 (32%)
Product Specifications
- Other Name: Seal Crankshaft Oil Front
- Replaces: 5184541AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2017 Chrysler 200 | C AWD, C FWD, Limited, Limited Convertible, Limited Sedan, LX, LX Sedan, S AWD, S Convertible, S FWD, S Sedan, Touring Convertible, Touring Sedan | 6 Cyl 3.6L

Chrysler 200 Crankshaft Seal

Crankshaft Seal is an assembly mounted horizontally at the front of the engine in Chrysler 200 vehicles which is solely responsible for stopping the leakage of engine oil from the crankcase. Usually made from metal and rubber this round seal helps to maintain the supply of lubricants to the important components of an engine in order to reduce the amount of friction between the two surfaces. With time, one is likely to notice some bad symptoms of the Crankshaft Seal in his Chrysler 200 especially if the car has high mileage or signs of oil leaks. Sensitization on these symptoms is crucial for replacement as soon as possible for efficiency in the performance of the engine. Looking at its general structure, it is not so complex to imagine that Crankshaft Seal is a crucial part of the car's performance, it's part of the Chrysler 200's power train, and thus it is essential element of the car's operations.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler 200 Crankshaft Seal at great affordable prices. Moreover, all genuine Chrysler 200 Crankshaft Seal come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Chrysler 200 Crankshaft Seal Parts Questions & Experts Answers

Seal-CRANKSHAFT Oil
5047167AA
Q: How do you replace the rear main oil seal in 2.7L V6 engine on Chrysler 200?
A: All models employ a one piece rear Crankshaft Seal mounted in a bolt-in housing and the only way to change this seal is to remove the transaxle and drive plate. The rear Crankshaft Seal and housing are considered as the seal and its housing, and they are serviced together; this calls for several tools. The first takes involves the separation of the transaxle, the oil pan as well as the driveplate. Subsequently, undo the rear Crankshaft Seal housing bolts and this housing. Wipe the crankshaft with clean oil and then place the new oil seal housing on the crankshaft, do not take off the protector that comes with the seal and housing until it is time to install the fully, as it will be used to push out when necessary to fit the oil seal protector. Once more the oil seal housing is bolted to the crankshaft and the bolts are slightly tightened proper alignment tools are secured on the oil pan rails. When applying the pressure on the oil seal housing, fasten the oil seal housing retainer bolts to the prescribed torque and make sure that the housing sits perfectly flat with the oil pan mating surface of the engine so as to avoid oil leaks. As for the rest of the installation, it is done in the reverse order to the removal.