How to Remove and Install a Fuel Pump/Fuel Pressure Regulator/Fuel Level Sending Unit Assembly on a Chrysler 200?

All wheel drive (AWD) models have a saddle fuel tank configuration and have main and auxiliary fuel pumps. Each fuel pump has a sending unit. The auxiliary fuel pump contains the fuel pump reservoir, fuel pressure regulator and fuel filter. Relieve the fuel system pressure. Disconnect the negative battery cable from the remote ground terminal or battery. Remove the rear seat cushion and fuel pump module cover. On AWD models, remove main and auxiliary fuel pump module covers. Disconnect the fuel delivery line quick-connect fitting and on 2015 and later models, also disconnect the fuel vapor line from the fuel pump/fuel pressure regulator/Fuel Level Sensor assembly. Disconnect the electrical connector from the fuel pump/fuel pressure regulator/Fuel Level Sensor assembly. Before removing the fuel pump/fuel pressure regulator/Fuel Level Sensor assembly, make alignment marks on the assembly and the fuel tank (if marks don't already exist), to ensure the assembly will be correctly realigned when it's installed again. Using adjustable-joint pliers, loosen the lock ring that secures the fuel pump/fuel pressure regulator/Fuel Level Sensor assembly. Carefully lift the fuel pump/fuel pressure regulator/Fuel Level Sensor assembly from the fuel tank. Angle the module so that you don't bend the float arm of the Fuel Level Sensor or damage the fuel pump inlet strainer. If you're removing the auxiliary pump on an AWD model, raise the fuel pump module and disconnect the internal fuel line. While the pump is removed, inspect the pump inlet strainer. Make sure that it's not clogged or damaged. If the inlet strainer is dirty, try washing it in clean solvent. If it's still clogged, replace it. Installation is the reverse of removal. Line up the marks, and tighten the fuel pump module lock ring securely.

Genuine Chrysler 200 Fuel Pump

Gas Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Fuel Pumps found

View related parts
Chrysler 200 Fuel Pump Module/Level Unit
Part Number: 68166589AC
$691.49 MSRP: $982.00
You Save: $290.51 (30%)
ADD TO CART
Product Specifications
- Other Name: Module Kit Fuel Pump/Level Unit; Fuel Pump
- Replaced by: 68166589AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2016 Chrysler 200 | C FWD, Limited, LX, S FWD | 4 Cyl 2.4L
View related parts
Chrysler 200 Fuel Pump Module Assembly
Part Number: 68187986AB
$927.79 MSRP: $1280.00
You Save: $352.21 (28%)
ADD TO CART
Product Specifications
- Other Name: Module Kit Fuel Pump/Level Unit
- Replaced by: 68187986AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2017 Chrysler 200 | C FWD, Limited, LX, S FWD | 4 Cyl 2.4L
View related parts
Chrysler 200 Fuel Pump Module/Level Unit
Part Number: 68217187AB
$635.80 MSRP: $967.00
You Save: $331.20 (35%)
ADD TO CART
Product Specifications
- Other Name: Module Kit Fuel Pump/Level Unit
- Replaced by: 68656897AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2016 Chrysler 200 | C FWD, Limited, LX, S FWD | 6 Cyl 3.6L
View related parts
Chrysler 200 Fuel Pump Complete Kit
Part Number: 68231311AA
$387.20 MSRP: $587.00
You Save: $199.80 (35%)
ADD TO CART
Product Specifications
- Other Name: Module Kit Fuel Pump/Level Unit
- Replaced by: 68231311AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2017 Chrysler 200 | C AWD, S AWD | 6 Cyl 3.6L
View related parts
Chrysler 200 Fuel Pump Module/Level Unit
Part Number: 68217192AB
$414.70 MSRP: $631.00
You Save: $216.30 (35%)
ADD TO CART
Product Specifications
- Other Name: Module Kit Fuel Pump/Level Unit
- Replaced by: 68656921AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2017 Chrysler 200 | C AWD, S AWD | 6 Cyl 3.6L
View related parts
Chrysler 200 Fuel Pump Module/Level Unit
Part Number: 68109894AB
$118.44 MSRP: $177.00
You Save: $58.56 (34%)
ADD TO CART
Product Specifications
- Other Name: Module Kit Fuel Pump/Level Unit
- Replaced by: 68109894AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017 Chrysler 200 | C AWD, S AWD | 6 Cyl 3.6L
View related parts
Chrysler 200 Fuel Pump Module Assembly
Part Number: 68033083AB
$321.20 MSRP: $490.00
You Save: $168.80 (35%)
ADD TO CART
Product Specifications
- Other Name: Module Kit Fuel Pump/Level Unit
- Replaced by: 68033083AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Chrysler 200 | Limited Sedan, LX Sedan, Touring Convertible, Touring Sedan | 4 Cyl 2.4L
View related parts
Chrysler 200 Fuel Pump Module/Level Unit
Part Number: 68004475AB
$417.24 MSRP: $612.00
You Save: $194.76 (32%)
ADD TO CART
Product Specifications
- Other Name: Module Kit Fuel Pump/Level Unit
- Replaced by: 68004475AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014 Chrysler 200 | LX Sedan, Limited Sedan, Touring Convertible, Touring Sedan | 4 Cyl 2.4L
- 2011 Chrysler 200 | LX Convertible, LX Sedan, Limited Sedan, Touring Convertible, Touring Sedan | 4 Cyl 2.4L
View related parts
Chrysler 200 Fuel Pump Module Assembly-And Level Sensor Module
Part Number: RL004475AB
$417.24 MSRP: $612.00
You Save: $194.76 (32%)
ADD TO CART
Product Specifications
- Other Name: Module Kit Fuel Pump/Level Unit
- Replaced by: 68004475AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2013 Chrysler 200 | Limited Sedan, LX Convertible, LX Sedan, Touring Convertible, Touring Sedan | 4 Cyl 2.4L

Chrysler 200 Fuel Pump

The Fuel Pump of Chrysler 200 vehicles is used to pump or transfer fuel from the tank to carburetor or the fuel injection assembly. Electric fuel pumps are generally employed on fuel injection assemblies being contextualized on the inside of the tank and perfectly connected to the sending unit assembly. Fuel pumps on the mechanical type are driven by the camshaft while metering pump delivers fuel to the float bowl of the carburetor. Thus, if the engine does not turn on, it is necessary to assess how the pump functions and if the voltage is correct. As for the type of performance fuel pumps, they come in different flow rates depending on the need of an engine; mechanical fuel pumps can produce up to 130 GPH for carburetor equipped engines. Electric pumps give higher pressures suitable for new models of fuel injection, regulated by the electronic control units concerning fuel delivery and safety.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler 200 Fuel Pump at great affordable prices. Moreover, all genuine Chrysler 200 Fuel Pump come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Chrysler 200 Fuel Pump Parts Questions & Experts Answers

Fuel Pump Module/Level Unit
68217187AB
Q: How to Remove and Install a Fuel Pump/Fuel Pressure Regulator/Fuel Level Sending Unit Assembly on a Chrysler 200?
A: All wheel drive (AWD) models have a saddle fuel tank configuration and have main and auxiliary fuel pumps. Each fuel pump has a sending unit. The auxiliary fuel pump contains the fuel pump reservoir, fuel pressure regulator and fuel filter. Relieve the fuel system pressure. Disconnect the negative battery cable from the remote ground terminal or battery. Remove the rear seat cushion and fuel pump module cover. On AWD models, remove main and auxiliary fuel pump module covers. Disconnect the fuel delivery line quick-connect fitting and on 2015 and later models, also disconnect the fuel vapor line from the fuel pump/fuel pressure regulator/Fuel Level Sensor assembly. Disconnect the electrical connector from the fuel pump/fuel pressure regulator/Fuel Level Sensor assembly. Before removing the fuel pump/fuel pressure regulator/Fuel Level Sensor assembly, make alignment marks on the assembly and the fuel tank (if marks don't already exist), to ensure the assembly will be correctly realigned when it's installed again. Using adjustable-joint pliers, loosen the lock ring that secures the fuel pump/fuel pressure regulator/Fuel Level Sensor assembly. Carefully lift the fuel pump/fuel pressure regulator/Fuel Level Sensor assembly from the fuel tank. Angle the module so that you don't bend the float arm of the Fuel Level Sensor or damage the fuel pump inlet strainer. If you're removing the auxiliary pump on an AWD model, raise the fuel pump module and disconnect the internal fuel line. While the pump is removed, inspect the pump inlet strainer. Make sure that it's not clogged or damaged. If the inlet strainer is dirty, try washing it in clean solvent. If it's still clogged, replace it. Installation is the reverse of removal. Line up the marks, and tighten the fuel pump module lock ring securely.

Related Chrysler 200 Parts

Browse by Year

2017 Fuel Pump 2016 Fuel Pump 2015 Fuel Pump 2014 Fuel Pump 2013 Fuel Pump 2012 Fuel Pump 2011 Fuel Pump