How to replace ignition switch on Chrysler 200?

On some models, the key lock cylinder and ignition switch have been replaced by a Wireless Ignition Node (WIN). The WIN is an integrated electronic receiver that is the center of communication for the key transmitter, remote starting system, security system and even the tire pressure monitoring system. If the WIN is damaged it cannot be repaired and must be replaced. If a new WIN is installed, it must be programmed to the vehicle and the ignition keys. This can only be done with a factory scan tool. The vehicle will not operate unless the WIN is programmed to the vehicle. To remove the WIN, disconnect the negative battery cable and remove the knee bolster and lower driver's side trim panel. Disconnect the coaxial cable connector and electrical connector to the WIN. Remove the fascia trim around the key opening in the dash to expose the WIN fasteners. Remove the mounting fasteners and remove the WIN from the instrument panel. Installation is the reverse of removal. To remove the ignition switch, remove the radio trim bezel and ignition switch bezel. Remove the instrument cluster and instrument cluster trim panel. Remove the driver's side knee bolster. Remove the switch mounting fasteners. Using a thin flat blade screwdriver, gently pry the clips from the ignition switch and push it out of the dash. Disconnect the shift interlock cable and remove the switch assembly. Installation is the reverse of removal.

Genuine Chrysler 200 Ignition Switch

Starter Ignition Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Ignition Switches found

View related parts
Chrysler 200 Switch-Ignition
Part Number: 4685719AI
$65.60 MSRP: $91.60
You Save: $26.00 (29%)
ADD TO CART
Product Specifications
- Other Name: Switch Ignition; Ignition Cylinder, Ignition Switch
- Replaces: 4685719AC, 4685719AE, 4685719AD, 68033393AA, 4685719AH, 4685719AB, 4685719AG, 4685719AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2013-2014 Chrysler 200 | LX Sedan, Limited Convertible, Limited Sedan, S Convertible, Touring Convertible, Touring Sedan | 4 Cyl 2.4L, 6 Cyl 3.6L
- 2011 Chrysler 200 | LX Convertible, LX Sedan, Limited Convertible, Limited Sedan, S Convertible, S Sedan, Touring Convertible, Touring Sedan | 4 Cyl 2.4L, 6 Cyl 3.6L
View related parts
Chrysler 200 Module-Ignition Switch
Part Number: 68185801AA
$85.35 MSRP: $130.00
You Save: $44.65 (35%)
ADD TO CART
Product Specifications
- Other Name: Module Ignition Switch Push Button
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015 Chrysler 200 | C AWD, C FWD, Limited, LX, S AWD, S FWD | 4 Cyl 2.4L, 6 Cyl 3.6L
View related parts
Chrysler 200 Module-Ignition Switch
Part Number: 68185801AB
$68.41 MSRP: $104.00
You Save: $35.59 (35%)
ADD TO CART
Product Specifications
- Other Name: Module Ignition Switch Push Button
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016 Chrysler 200 | C AWD, C FWD, Limited, LX, S AWD, S FWD | 4 Cyl 2.4L, 6 Cyl 3.6L
View related parts
Chrysler 200 Switch-Ignition
Part Number: 4685719AH
$65.60 MSRP: $91.60
You Save: $26.00 (29%)
ADD TO CART
Product Specifications
- Other Name: Switch Ignition
- Replaced by: 4685719AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011 Chrysler 200 | Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, S Convertible, S Sedan, Touring Convertible, Touring Sedan | 4 Cyl 2.4L, 6 Cyl 3.6L
View related parts
Chrysler 200 Switch-Ignition
Part Number: 68020927AA
$149.81 MSRP: $227.00
You Save: $77.19 (34%)
ADD TO CART
Product Specifications
- Other Name: Switch Ignition; Ignition Switch
- Replaces: 4589076AE, 4589076AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2014 Chrysler 200 | Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, S Convertible, S Sedan, Touring Convertible, Touring Sedan | 4 Cyl 2.4L, 6 Cyl 3.6L
View related parts
Chrysler 200 Switch-Ignition
Part Number: 68080538AA
$57.02 MSRP: $84.30
You Save: $27.28 (33%)
ADD TO CART
Product Specifications
- Other Name: Switch Ignition
- Replaced by: 68149230AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2012 Chrysler 200 | Limited Sedan, LX Convertible, LX Sedan, Touring Convertible, Touring Sedan | 4 Cyl 2.4L
View related parts
Chrysler 200 Module-KEYLESS Ignition Node
Part Number: 68299957AB
$66.55 MSRP: $101.00
You Save: $34.45 (35%)
Product Specifications
- Other Name: Module Keyless Ignition Node
- Replaced by: 68709915AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017 Chrysler 200 | C AWD, C FWD, Limited, LX, S AWD, S FWD | 4 Cyl 2.4L, 6 Cyl 3.6L

Chrysler 200 Ignition Switch

The Ignition Switch in Chrysler 200 automobiles is a vital component that controls the ignition as well as charging of the car and subsequent running of the various electrical system fixtures such as the radio, power windows among others. This can be in the form of a traditional key, a push button or even a remote controller, thereby sending a signal to the vehicle's computer to energize the various parts needed for the operation of the engine. Year to year, Chrysler 200 has adopted different styles of Ignition Switches ranging from mechanical key styles to modern key-less types whereby the user only has to press buttons. While former models of switches needed an individual key to unlock the system, latest models have an immobiliser which senses a transponder signal. However, Problems with Ignition Switches in Chrysler 200 cars are also crucial despite the fact that these are commonly fairly easy to fix as they represent a plug-and-play part that is adjusted to a specific automobile version.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler 200 Ignition Switch at great affordable prices. Moreover, all genuine Chrysler 200 Ignition Switch come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Chrysler 200 Ignition Switch Parts Questions & Experts Answers

Module-KEYLESS Ignition Node
68299957AB
Q: How to replace ignition switch on Chrysler 200?
A: On some models, the key lock cylinder and ignition switch have been replaced by a Wireless Ignition Node (WIN). The WIN is an integrated electronic receiver that is the center of communication for the key transmitter, remote starting system, security system and even the tire pressure monitoring system. If the WIN is damaged it cannot be repaired and must be replaced. If a new WIN is installed, it must be programmed to the vehicle and the ignition keys. This can only be done with a factory scan tool. The vehicle will not operate unless the WIN is programmed to the vehicle. To remove the WIN, disconnect the negative battery cable and remove the knee bolster and lower driver's side trim panel. Disconnect the coaxial cable connector and electrical connector to the WIN. Remove the fascia trim around the key opening in the dash to expose the WIN fasteners. Remove the mounting fasteners and remove the WIN from the instrument panel. Installation is the reverse of removal. To remove the ignition switch, remove the radio trim bezel and ignition switch bezel. Remove the Instrument Cluster and instrument cluster trim panel. Remove the driver's side knee bolster. Remove the switch mounting fasteners. Using a thin flat blade screwdriver, gently pry the clips from the ignition switch and push it out of the dash. Disconnect the shift interlock cable and remove the switch assembly. Installation is the reverse of removal.