What are the steps involved in the removal and installation process of the oil cooler on Chrysler 200?

In performing this change, first clear the fuel pressure and afterward, further, disconnect the negative terminal on the battery or the remote ground terminal. Next, drain the coolant. Then, take out the lower intake manifold, and the oil cooler mounting screws, and bolts. Go ahead and pull out the oil cooler and throw away the seals. In performing installation, first of all, new seals has to be installed into an oil cooler. Next, fit the oil cooler onto the block and then install the two screws that are used for the mounting, then the two bolts, before you tighten the bolts to the recommended torque. As for the rest of the installation the order is the inversion of the removal order. Last, add more water to the cooling system, start the car and let the engine to reach normal temperature and look for signs of leakage.

Genuine Chrysler 200 Oil Cooler

Engine Oil Cooler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Oil Coolers found

View related parts
Chrysler 200 Transmission Oil Cooler
Part Number: 68183728AB
$100.39 MSRP: $208.00
You Save: $107.61 (52%)
ADD TO CART
Product Specifications
- Other Name: Cooler-Transmission Oil; Oil Cooler, Transmission Cooler
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2017 Chrysler 200 | C AWD, C FWD, Limited, LX, S AWD, S FWD | 4 Cyl 2.4L, 6 Cyl 3.6L
View related parts
Chrysler 200 Engine Oil Cooler
Part Number: 4884757AE
$99.12 MSRP: $150.00
You Save: $50.88 (34%)
ADD TO CART
Product Specifications
- Other Name: Cooler-Engine Oil; Oil Cooler
- Replaces: 4884757AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Chrysler 200 | Limited Sedan, LX Convertible, LX Sedan, Touring Convertible, Touring Sedan | 4 Cyl 2.4L
View related parts
Chrysler 200 Engine Oil Cooler
Part Number: 5048119AA
$76.98 MSRP: $116.00
You Save: $39.02 (34%)
ADD TO CART
Product Specifications
- Other Name: Cooler-Engine Oil
- Replaced by: 5048119AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2017 Chrysler 200 | C FWD, Limited, LX, S FWD | 4 Cyl 2.4L

Chrysler 200 Oil Cooler

In Chrysler 200 cars, the Oil Cooler is a very vital component since it is responsible for cooling oil to offer the finest performance and durability. Using the protection system of an oil-to-water cooling mechanism that is part of the vehicle's cooling system, the Oil Cooler successfully controls the heat exchange, which is necessary to heat up the oil and prevent it from overheating. Different types of Oil Coolers have been implemented in Chrysler 200 throughout the years with much emphasis on cooling performance under stress. However, it is usually a letdown to have factory-installed coolers sometimes, especially in cases of heavy activities such as towing. If there is clogging and or corrosion, then its ability to be an efficient Oil Cooler may be affected and therefore oil may become contaminated. Evaluating to the upgrade of oil cooler kits could therefore be a solution to offering a continuous endeavor of reducing oil temperatures, thus increasing both the oil and the engine Chrysler 200 lives.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler 200 Oil Cooler at great affordable prices. Moreover, all genuine Chrysler 200 Oil Cooler come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Chrysler 200 Oil Cooler Parts Questions & Experts Answers

Transmission Oil Cooler
68183728AB
Q: What are the steps involved in the removal and installation process of the oil cooler on Chrysler 200?
A: In performing this change, first clear the fuel pressure and afterward, further, disconnect the negative terminal on the battery or the remote ground terminal. Next, drain the coolant. Then, take out the lower intake manifold, and the oil cooler mounting screws, and bolts. Go ahead and pull out the oil cooler and throw away the seals. In performing installation, first of all, new seals has to be installed into an oil cooler. Next, fit the oil cooler onto the block and then install the two screws that are used for the mounting, then the two bolts, before you tighten the bolts to the recommended torque. As for the rest of the installation the order is the inversion of the removal order. Last, add more water to the cooling system, start the car and let the engine to reach normal temperature and look for signs of leakage.