×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Chrysler 200 Sway Bar Bushing
Stabilizer Sway Bar Bushing- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
6 Sway Bar Bushings found
Chrysler 200 Sway Bar Bushing
The Sway Bar Bushing in Chrysler 200 vehicles are important in improving the quality of ride offered as well as the stability of the car. These bushings are made to dampen the road irregularities, reduce noise and allow for support of the sway bar that reduces on body sway during turning. Chrysler 200 models may be equipped with front and rear sway bar bushings thus improving the car's stability. In the long run, one will realize that the Sway Bar Bushing can become worn out to provide responsiveness, rattling, squeaking noises among others. These symptoms also point to further infractions as worse handling and safety problems if addressed at this level. Failure to maintain and lubricate the Sway Bar Bushing timely affects the performance of Chrysler 200 vehicles resulting to a bad ride and increased risk of your safety.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler 200 Sway Bar Bushing at great affordable prices. Moreover, all genuine Chrysler 200 Sway Bar Bushing come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Chrysler 200 Sway Bar Bushing Parts Questions & Experts Answers
- Q: How to remove and install a front stabilizer bar and stabilizer bar bushing on Chrysler 200?A: Disconnect the negative cable from the battery or the remote battery terminal. Loosen the lug nuts on the front wheels, raise the front of the vehicle, and securely support it on jackstands. Apply the parking brake and block the rear wheels to prevent the vehicle from rolling off the stands. Remove the front wheels. Remove the nuts on the sway bar links to detach the links from the sway bar. Use a wrench to hold the stud on the link in place while removing the nut to prevent rotation. If replacement is necessary, the link can be completely detached from the sway bar and the strut assembly. Remove the under-vehicle splash shield. Remove the rear engine mount. Remove the front engine mount through-bolt. Remove the two screws attaching the power steering hose clamps to the rear of the crossmember. Remove the heat shield. Remove the two bolts that secure the steering gear to the crossmember. Support the steering gear with a rope, bungee cord, or wire to hold it in place as the crossmember is lowered. Remove the subframe. Remove the bolts on the sway bar brackets and remove the brackets and bushings. Remove the sway bar. Install the sway bar, bushings, and brackets onto the crossmember, but do not tighten them yet. Center the sway bar on the crossmember. Tighten the bracket bolts. Align the crossmember with the marks you made earlier and install the mounting bolts and screws. If removed, install the engine mount and power steering line brackets/fasteners. Install the sway bar links and tighten the nuts. Install the wheels and lug nuts. Lower the vehicle and tighten the wheel lug nuts.
