How to Remove and Install a Steering Gear on Chrysler 300?

Park the vehicle with the wheels pointing straight ahead. Loosen the front wheel lug nuts, raise the front of the vehicle and support it securely on jackstands. Apply the parking brake. Remove the wheels. Detach the tie-rod ends from the steering knuckles. Mark the relationship of the intermediate shaft coupler to the rack and pinion input shaft, remove the pinch bolt and separate the coupler from the input shaft. Position a drain pan under the rack and pinion. Using a flare-nut wrench, disconnect the power steering pressure and return lines from the rack and pinion. Cap the lines to prevent leakage. Remove the mounting fasteners and then remove the rack and pinion. Inspect all rubber bushings for wear and damage. If any of the rubber parts are cracked, torn or generally deteriorated, replace them. Installation is the reverse of removal, noting the following points: Tighten the rack and pinion mounting bolts and the lower coupler pinch bolt. Tighten the wheel lug nuts. Check the power steering fluid level and add some, if necessary. Bleed the system. Re-check the power steering fluid level.

Genuine Chrysler 300 Rack And Pinion

Steering Rack And Pinion

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

90 Rack And Pinions found

View related parts
Chrysler 300 Rack And Pinion Gear
Part Number: 4584572AF
$976.82 MSRP: $1505.00
You Save: $528.18 (36%)
ADD TO CART
Product Specifications
- Other Name: Gear-Rack And Pinion; Gear Assembly, Steering Gear
- Replaces: 4584572AD, 4584572AE, RL584572AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Chrysler 300 | Base AWD, C AWD, C John Varvatos AWD, C Luxury Series AWD, Limited AWD, S AWD, S V6 AWD, S V8 AWD | 6 Cyl 3.6L, 8 Cyl 5.7L
View related parts
Chrysler 300 GEAR-RACK AND PINION
Part Number: 68593995AC
$1636.00 MSRP: $2540.00
You Save: $904.00 (36%)
ADD TO CART
Product Specifications
- Other Name: Gear Assembly, Steering Gear
- Replaces: 68466314AA, 68323548AB, 68274998AC, 68416733AE, 68367377AB, 68466314AB, 68367377AC, 68323548AA, 68416733AD, 68525038AB, 68416733AB, 68416733AA, 68525038AA, 68367377AA, 68274998AB, 68593995AB, 68416733AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2023 Chrysler 300 | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
- 2016-2020 Chrysler 300 | C Platinum RWD, C RWD, Limited RWD, S RWD
View related parts
Chrysler 300 GEAR-RACK AND PINION
Part Number: 68593998AA
$2470.50 MSRP: $3815.00
You Save: $1344.50 (36%)
ADD TO CART
Product Specifications
- Other Name: Gear Assembly, Steering Gear
- Replaces: 68323544AC, 68323544AB, 68505173AB, 68417470AA, 68323544AE, 68274994AB, 68323544AD, 68526093AA, 68505173AA, 68417470AB, 68323544AF, 68466320AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016-2023 Chrysler 300 | C AWD, C Platinum AWD, Limited AWD, S AWD, Touring AWD | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6L, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 RACK AND PINION
Part Number: 68526090AA
$630.86 MSRP: $930.00
You Save: $299.14 (33%)
ADD TO CART
Product Specifications
- Other Name: Gear Assembly, Steering Gear
- Replaces: 68323541AA, 68417467AA, 68417467AD, 68323541AB, 68323541AD, 68466317AB, 68466317AA, 68417467AB, 68323541AC, 68274991AB, 68417467AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2022-2023 Chrysler 300 | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
- 2016-2020 Chrysler 300 | C Platinum RWD, C RWD, Limited RWD, S RWD, Touring RWD | 6 Cyl 3.6L, 8 Cyl 5.7L
View related parts
Chrysler 300 Gear-Rack And Pinion
Part Number: 68466320AA
$2666.81 MSRP: $3815.00
You Save: $1148.19 (31%)
ADD TO CART
Product Specifications
- Replaced by: 68593998AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2020 Chrysler 300 | Limited AWD, S AWD, Touring AWD | 6 Cyl 3.6L
View related parts
Chrysler 300 Gear-Rack And Pinion
Part Number: 68274994AB
$2666.81 MSRP: $3815.00
You Save: $1148.19 (31%)
ADD TO CART
Product Specifications
- Other Name: Gear Rack And Pinion Electric
- Replaced by: 68593998AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016 Chrysler 300 | C AWD, C Platinum AWD, Limited AWD, S AWD | 6 Cyl 3.6L
View related parts
Chrysler 300 Rack And Pinion Gear
Part Number: R4782341AK
$346.93 MSRP: $418.00
You Save: $71.07 (17%)
ADD TO CART
Product Specifications
- Other Name: Gear-Rack And Pinion
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2008 Chrysler 300 | Base RWD, C RWD, LX RWD, Touring RWD | 6 Cyl 2.7L, 6 Cyl 3.5L, 8 Cyl 5.7L
View related parts
Chrysler 300 Gear-Rack And Pinion
Part Number: 5154743AI
$1954.80 MSRP: $2645.00
You Save: $690.20 (27%)
ADD TO CART
Product Specifications
- Other Name: Gear Rack And Pinion Electric
- Replaced by: 5154743AL
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015 Chrysler 300 | C Platinum RWD, C RWD, Limited RWD, S RWD | 6 Cyl 3.6L
View related parts
Chrysler 300 Rack And Pinion Gear Remanufactured
Part Number: R8043033AB
$370.08 MSRP: $447.00
You Save: $76.92 (18%)
ADD TO CART
Product Specifications
- Other Name: Gear-Rack And Pinion
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Chrysler 300 | C RWD, S V8 RWD, Touring RWD | 8 Cyl 5.7L
View related parts
Chrysler 300 Gear-Rack And Pinion
Part Number: 68466314AB
$1722.98 MSRP: $2540.00
You Save: $817.02 (33%)
ADD TO CART
Product Specifications
- Replaced by: 68593995AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2020 Chrysler 300 | S RWD
View related parts
Chrysler 300 Gear-Rack And Pinion
Part Number: 68323548AA
$1662.58 MSRP: $2540.00
You Save: $877.42 (35%)
ADD TO CART
Product Specifications
- Other Name: Gear Rack And Pinion Electric
- Replaced by: 68593995AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016 Chrysler 300 | C Platinum RWD, C RWD, S RWD
View related parts
Chrysler 300 Gear-Rack And Pinion
Part Number: 68416733AB
$1662.58 MSRP: $2540.00
You Save: $877.42 (35%)
ADD TO CART
Product Specifications
- Replaced by: 68593995AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2019 Chrysler 300 | S RWD
View related parts
Chrysler 300 Rack And Pinion Gear
Part Number: 4584572AE
$992.68 MSRP: $1505.00
You Save: $512.32 (35%)
ADD TO CART
Product Specifications
- Other Name: Gear-Rack And Pinion
- Replaced by: 4584572AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2013 Chrysler 300 | Base AWD, C AWD, C John Varvatos AWD, C Luxury Series AWD, Limited AWD, S AWD, S V6 AWD, S V8 AWD | 6 Cyl 3.6L, 8 Cyl 5.7L
View related parts
Chrysler 300 Gear-Rack And Pinion
Part Number: 68323548AB
$1662.58 MSRP: $2540.00
You Save: $877.42 (35%)
ADD TO CART
Product Specifications
- Replaced by: 68593995AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017 Chrysler 300 | C Platinum RWD, C RWD, S RWD
View related parts
Chrysler 300 Gear-Rack And Pinion
Part Number: 68367377AA
$1662.58 MSRP: $2540.00
You Save: $877.42 (35%)
ADD TO CART
Product Specifications
- Replaced by: 68593995AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018 Chrysler 300 | Limited RWD, S RWD
View related parts
Chrysler 300 Rack And Pinion Gear
Part Number: 4584572AD
$992.68 MSRP: $1505.00
You Save: $512.32 (35%)
ADD TO CART
Product Specifications
- Other Name: Gear-Rack And Pinion
- Replaced by: 4584572AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2012 Chrysler 300 | Base AWD, C AWD, C Luxury Series AWD, Limited AWD, S V6 AWD, S V8 AWD | 6 Cyl 3.6L, 8 Cyl 5.7L
View related parts
Chrysler 300 GEAR-RACK AND PINION
Part Number: 68593997AA
$2267.58 MSRP: $3455.00
You Save: $1187.42 (35%)
ADD TO CART
Product Specifications
- Other Name: Gear Assembly
- Replaces: 68526090AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2021-2022 Chrysler 300 | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chrysler 300 Rack And Pinion Gear Remanufactured
Part Number: R4584569AF
$477.88 MSRP: $578.00
You Save: $100.12 (18%)
ADD TO CART
Product Specifications
- Other Name: Gear-Rack And Pinion
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Chrysler 300 | Base RWD, C John Varvatos RWD, C Luxury Series RWD, C RWD, C SRT8 RWD, Limited RWD, S Luxury Series RWD, S RWD, S V6 RWD, S V8 RWD, SRT Core RWD, SRT Premium RWD | 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.4L
View related parts
Chrysler 300 Gear-Rack And Pinion
Part Number: 68274991AB
$630.86 MSRP: $930.00
You Save: $299.14 (33%)
ADD TO CART
Product Specifications
- Other Name: Gear Rack And Pinion Electric
- Replaced by: 68526090AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016 Chrysler 300 | C Platinum RWD, C RWD, Limited RWD, S RWD | 6 Cyl 3.6L, 8 Cyl 5.7L
View related parts
Chrysler 300 RACK AND PINION
Part Number: 68526095AA
$1945.28 MSRP: $2865.00
You Save: $919.72 (33%)
Product Specifications
- Other Name: Gear Assembly
- Replaces: 68323546AC, 68323546AD, 68417472AB, 68274996AB, 68323546AA, 68417472AD, 68466322AB, 68323546AB, 68417472AA, 68417472AC, 68466322AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016-2021 Chrysler 300 | C Platinum RWD, C RWD, Limited RWD, S RWD, Touring RWD | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6L, 8 Cyl 5.7 L GAS, 8 Cyl 5.7L

| Page 1 of 5 |Next >

1-20 of 90 Results

Chrysler 300 Rack And Pinion

Steering Rack in Chrysler 300 vehicles, is a mechanical link, whose task is to transfer rotational motion of the steering wheel into the lateral displacement of the front wheels. With the help of rack and pinion mechanism, the automaker has an assembly that is comprised of tiny pinion gear that is connected to the steering column, and the rack gear that is housed inside a metal tube and is connected by the tie-rods to the wheels. Most of the current Chrysler 300 use Power assisted Rack and pinion steering where the ease is supplemented by a hydraulic fluid from an oil pump driven by the car engine. Throughout the past, Chrysler 300 cars have mainly applied hydraulic power steering racks, whereby a fluid-filled cylinder and piston offers a good deal of help. As for the type of the gears that are applied, although straight gears are more effective, helical gears have been employed as well though emphasizing some disadvantages, like wear. In general, the Steering Rack in Chrysler 300 vehicles is crafted to provide precise and responsive manner to handle the car and give accurate feedback of the steering wheel for a smooth ride.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler 300 Rack And Pinion at great affordable prices. Moreover, all genuine Chrysler 300 Rack And Pinion come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Chrysler 300 Rack And Pinion Parts Questions & Experts Answers

Rack And Pinion Gear
R4854551AF
Q: How to Remove and Install a Steering Gear on Chrysler 300?
A: Park the vehicle with the wheels pointing straight ahead. Loosen the front wheel lug nuts, raise the front of the vehicle and support it securely on jackstands. Apply the parking brake. Remove the wheels. Detach the tie-rod ends from the Steering Knuckles. Mark the relationship of the intermediate shaft coupler to the rack and pinion input shaft, remove the pinch bolt and separate the coupler from the input shaft. Position a drain pan under the rack and pinion. Using a flare-nut wrench, disconnect the power steering pressure and return lines from the rack and pinion. Cap the lines to prevent leakage. Remove the mounting fasteners and then remove the rack and pinion. Inspect all rubber bushings for wear and damage. If any of the rubber parts are cracked, torn or generally deteriorated, replace them. Installation is the reverse of removal, noting the following points: Tighten the rack and pinion mounting bolts and the lower coupler pinch bolt. Tighten the wheel lug nuts. Check the power steering fluid level and add some, if necessary. Bleed the system. Re-check the power steering fluid level.