×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Chrysler Cirrus Ignition Lock Cylinder
Ignition Key Lock Cylinder- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Ignition Lock Cylinder found
Chrysler Cirrus Cylinder Lock-Ignition Lock
Part Number: 4746666$26.99 MSRP: $34.87You Save: $7.88 (23%)
Chrysler Cirrus Ignition Lock Cylinder
The Ignition Lock Cylinder in Chrysler Cirrus specifically provides the primary purpose of allowing starting of the car's engine by use of a key. This feature is contained in the ignition switch that provides power by the battery to the relevant circuits whenever the right key is inserted. This generation Chrysler Cirrus has a conventional column-mounted ignition lock cylinder that enhances security of the car and minimizes theft, something set in place in the 1970's. Year after year, the Chrysler Cirrus cars have relied on high security features, and one of them has been the coded ignition key that has to interface with the car's computer and if the car recognizes the coded key only then can the engine be started. Still, the Ignition Lock Cylinder has become much more sophisticated over the years and have been known to become worn and malfunctions causing Engine Drive-Ability issues or for the engine to shut down unexpectedly.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler Cirrus Ignition Lock Cylinder at great affordable prices. Moreover, all genuine Chrysler Cirrus Ignition Lock Cylinder come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Chrysler Cirrus Ignition Lock Cylinder Parts Questions & Experts Answers
- Q: How do you remove and install the ignition switch and key lock cylinder on Chrysler Cirrus?A: In this position, the following circuits are active, fuel pump relay, starter motor relay, the Powertrain Control Module, the Anti-lock Brake System control module and distributors for the V6 engine. The switch is positioned at the interior part of the steering column and its operation is based on the key lock Cylinder. Start by loosening the negative battery terminal from the ground stud on the left shock tower; then, take out the steering column shields. Third, unthread the key lock cylinder and also the screw that fixes the switch on the steering column. Pressing the retaining tabs, the switch should be taken down from the steering column, and the electrical connector disconnected from the ignition switch. For installation, do the reverse of the removal procedures; guarantee the switch together with the lock cylinder are in running postures before tightening the switch mounting screw. The ignition key lock cylinder is fixed on the right side of the steering column. Once again, take off the negative battery terminals and also the steering column surrounding trims. Put the ignition key in the lock and turn the switch to the run position remove the retaining tab with a small screwdriver to pull out the lock cylinder from the housing. During installation, it is required to switch ignition slot to the 'RUN' position insert the lock cylinder into the housing until retaining tab engages the housing, and test the keys. The steps which follow the process of installation include procedures which are the reverse of removal.
