×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Chrysler Laser Door Lock Cylinder
Door Lock Cylinder Tumbler- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Door Lock Cylinder found
Chrysler Laser Door Lock Cylinder
Chrysler Laser car model has the Door Lock Cylinder in the front door and it is responsible for locking or unlocking of the automobiles door with a car key. This mechanism as we have observed allows for appropriate or safe access to the interiors of the vehicle as well as bearing ease-of-use characteristics. With use, the Door Lock Cylinder tends to wear out and develop problems in terms of operation within the car where the doors will either lock or unlock with a lot of efforts or the key may get stuck in the process. However, what seems to have remained constant with the Chrysler Laser are the Door Lock Cylinders though the design and the operation may not be the same with that of the previous models. It is also important to mention that every car owner should monitor Door Lock Cylinder state to avoid problems connected to worn elements of the car, periodic check of their state and timely replacement are also the key factors which contribute to the further safety and comfort of Chrysler Laser driving.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler Laser Door Lock Cylinder at great affordable prices. Moreover, all genuine Chrysler Laser Door Lock Cylinder come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Chrysler Laser Door Lock Cylinder Parts Questions & Experts Answers
- Q: How do you remove and install a door handle and lock cylinder on Chrysler Laser?A: Lower the window and disconnect the battery. Remove the door trim panel and peel back the liner to expose the rear of the major access hole. If equipped, remove the illuminated entry switch using a fabricated tool. Disconnect the handle links from the latch and the lock. Remove the two retaining nuts, pull the handle out, and take out the lock cylinder from the handle. Place the key cylinder in the handle, install the retainer, and tighten the screws securely. Install the handle in the door and tighten the nuts securely. Connect the links to the handle and the lock, then install the illuminated entry switch followed by the door trim panel.