How do you disconnect the negative cable at the battery and remove the ignition switch from the steering column on Chrysler Laser?

Disconnect the negative cable at the battery and place it out of the way to prevent accidental contact with the negative terminal, which would allow power back into the vehicle's electrical system. Remove the left lower instrument panel cover and the cruise control clutch speed switch if equipped. Take off the steering column cover and then remove the nuts securing the steering column-to-support bracket, carefully lowering the column until the ignition switch is exposed, as it is mounted on top of the steering column. Remove the two mounting bolts, rotate the switch 90 degrees, and detach it from the ignition switch rod. Installation follows the reverse order of removal.

Genuine Chrysler Laser Ignition Switch

Starter Ignition Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Ignition Switches found

View related parts
Chrysler Laser Switch Ignition & Starter
Part Number: 3747529
Product Specifications
- Other Name: Switch, Ignition & Starter; Ignition Switch
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1984-1986 Chrysler Laser | 4 Cyl 2.2L, 4 Cyl 2.5L
View related parts
Chrysler Laser Switch-Ign & Starter
Part Number: 3747882
Product Specifications
- Other Name: Switch, Ignition & Starter; Cylinder & Key, Ignition Switch
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1984-1986 Chrysler Laser | 4 Cyl 2.2L, 4 Cyl 2.5L
View related parts
Chrysler Laser Ignition & Starter
Part Number: 4221201
Product Specifications
- Other Name: Switch, Ignition & Starter; Cylinder & Key, Ignition Switch
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1984-1986 Chrysler Laser | 4 Cyl 2.2L, 4 Cyl 2.5L

Chrysler Laser Ignition Switch

The Chrysler Laser vehicles have an Ignition Switch more commonly known as a starter switch since it plays an important role in the ignition and charging circuitry of the vehicle. A turn of the Ignition Switch through a key, button, or a remote control switches on the Computer system of the vehicle, making it possible for the Chrysler Laser to start the function of its engine and serve the intended purpose. In the past, different Chrysler Laser models have used standard mechanical type of ignition with a key which can only unlock the system with an appropriate key. New ones can be very complex keyless systems where the key relies on push buttonstart but it needs to send a signal via the transponder. Although the Ignition Switch is critical to the performance of the vehicle, it is still quite easy to replace and follows a plug and play concept that is suitable for the Chrysler Laser.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler Laser Ignition Switch at great affordable prices. Moreover, all genuine Chrysler Laser Ignition Switch come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Chrysler Laser Ignition Switch Parts Questions & Experts Answers

Switch Ignition & Starter
3747529
Q: How do you disconnect the negative cable at the battery and remove the ignition switch from the steering column on Chrysler Laser?
A: Disconnect the negative cable at the battery and place it out of the way to prevent accidental contact with the negative terminal, which would allow power back into the vehicle's electrical system. Remove the left lower instrument panel cover and the cruise control clutch speed switch if equipped. Take off the steering column cover and then remove the nuts securing the steering column-to-support bracket, carefully lowering the column until the ignition switch is exposed, as it is mounted on top of the steering column. Remove the two mounting bolts, rotate the switch 90 degrees, and detach it from the ignition switch rod. Installation follows the reverse order of removal.