×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Chrysler PT Cruiser A/C Accumulator
Accumulator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
9 A/C Accumulators found
Chrysler PT Cruiser DRIER-Air Conditioning
Part Number: 68029242AA$146.05 MSRP: $193.00You Save: $46.95 (25%)
Chrysler PT Cruiser ACCUMULAT-Air Conditioning
Part Number: 68029229AA$182.08 MSRP: $285.00You Save: $102.92 (37%)
Chrysler PT Cruiser ACCUMULAT-Air Conditioning
Part Number: 5142570AB$109.98 MSRP: $163.00You Save: $53.02 (33%)
Chrysler PT Cruiser A/C Accumulator
The A/C Accumulator in Chrysler PT Cruiser is considered to be important as it prevents moisture from accumulating within the air conditioning system while also trapping debris. This element is found in two key components: the receiver drier, connected usually in the high-pressure liquid line and the accumulator installed ideally before the compressor and after the evaporator. Both component employ of the desiccant bag to shield the A/C system against the moisture-formed rust and debris form sludge that is lethal to the system. It stated that Chrysler PT Cruiser vehicles may need the A/C Accumulator to be changed during massive A/C services because debris can not be dispersed from the system. The sorptive capacity of desiccant is defined, and the desiccant can only absorb limited amount of water and start to get saturated when it is opened to the air. It is thus important to replace the A/C Accumulator on time to avoid such leakage and to ensure the longevity of the A/C system as well as warrant the validity in case of a warrantable replacement of compressors.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler PT Cruiser A/C Accumulator at great affordable prices. Moreover, all genuine Chrysler PT Cruiser A/C Accumulator come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Chrysler PT Cruiser A/C Accumulator Parts Questions & Experts Answers
- Q: How to remove and install the accumulator on Chrysler PT Cruiser?A: The accumulator, a refrigerant reservoir, is located in the engine compartment. To remove it, discharge the system, remove the cruise control servo bolts and low-pressure cycling switch, and disconnect the refrigerant lines. Discard old O-rings and plug open fittings. Remove the bracket screw and lift the accumulator out. Installation is the reverse of removal, adding an ounce of refrigerant oil if it's a new accumulator.
