×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Chrysler PT Cruiser Fuel Injector
Gas Injector- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
13 Fuel Injectors found
Chrysler PT Cruiser Fuel Injector
The Fuel Injector as used in Chrysler PT Cruiser vehicles is responsible for the task of dispensing fuel directly to the engine cylinder in order to provide the optimal possible air-fuel blend for combustion. This is another assembly that is also regulated by the Engine Control Module with a working principle that entails spraying fuel depending on the demands of the engine, for better performance as well as fuel efficiency. Fuel injections in Chrysler PT Cruiser models are Electronic Fuel Injectors and the two types include direct injections and the indirect ones. Direct injection sprays fuel directly into the combustion chamber whereas indirect injection sprays fuel and air into the chamber. The major difference is the method of injection while the direct injection normally shows higher efficiency and power. Faulty fuel injectors have been known to cause substandard performance of the vehicle's engine which makes it important for the Chrysler PT Cruiser to undergo injector replacement from time to time.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler PT Cruiser Fuel Injector at great affordable prices. Moreover, all genuine Chrysler PT Cruiser Fuel Injector come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Chrysler PT Cruiser Fuel Injector Parts Questions & Experts Answers
- Q: How do you remove and replace fuel injectors and Fuel Rail on Chrysler PT Cruiser?A: Relieve system fuel pressure, then disconnect the cable from the negative terminal of the battery. Drain the engine coolant, followed by removing the Throttle Body/air intake plenum cover and the upper intake manifold. Next, remove the upper radiator hose and disconnect the fuel supply line from the fuel rail by squeezing the two tabs on the quick-connect fitting together and pulling up. Disconnect the fuel injector electrical connectors by pushing up on the lock, squeezing the tab on the same side of the connector as the lock, and pulling up. Remove the fuel rail bolts to detach the fuel rail, then carefully pull up on the fuel rail to disengage the injectors from their respective bores in the intake manifold, removing the fuel rail and injectors. Remove the injector retaining clips and detach the injectors from the fuel rail by pulling off each retaining clip, pulling out the injector, and removing the O-rings. Discard the old O-rings and replace them with new ones along with a new grommet. Installation is the reverse of removal, ensuring to tighten the fuel rail retaining bolts to the specified torque. Refill and bleed the cooling system, and when finished, start the engine to check for leaks at the fuel supply hose fitting at the fuel rail and at each injector.
Related Chrysler PT Cruiser Parts
Chrysler PT Cruiser Fuel Pump
Chrysler PT Cruiser Headlight
Chrysler PT Cruiser Horn
Chrysler PT Cruiser Fuel Level Sensor
Chrysler PT Cruiser Fuel Rail
Chrysler PT Cruiser Fuel Sending Unit
Chrysler PT Cruiser Fuel Injector O-Ring
Chrysler PT Cruiser Fuel Injector Seal
Chrysler PT Cruiser Fuse
Chrysler PT Cruiser Harmonic Balancer