×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Chrysler PT Cruiser Fuel Tank
Gas Tank- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Fuel Tanks found
Chrysler PT Cruiser Fuel Tank
The Fuel Tank of Chrysler PT Cruiser is one of the strategically placed automotive parts its main function entails holding and supplying fuel to the engine as needed. It is(situated at the back part of the vehicle) can also possess an aspect for a fuel filler pipe, Vent system and it interacts with the engine cables. The tank may be metallic or plastic, metallic tanks are made from stamped and welded steel or aluminum whereas the plastic ones are produced from High Density Polyethylene (HDPE). As for the years the Chrysler PT Cruiser car has used these various types of Fuel Tanks, each one distinguished by peculiarities. Metals, which are used in construction of tanks, corrode and rust while plastics used in construction crack up under extreme temperature and vibrations. Each is developed for withstanding environment aggression with an objective to maintaining Fuel Tank integrity. Furthermore, there are parts that are on sale if the current parts need to be replaced and it is up to the Chrysler PT Cruiser owners to ensure that parts fit properly and come from reputable producers.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler PT Cruiser Fuel Tank at great affordable prices. Moreover, all genuine Chrysler PT Cruiser Fuel Tank come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Chrysler PT Cruiser Fuel Tank Parts Questions & Experts Answers
- Q: How do you remove and reinstall a fuel tank on Chrysler PT Cruiser?A: In order to take out the fuel tank, the first step is to unscrew the fuel filler cap a little to release the pressure inside then releasing the system's fuel pressure. Then, bevor the metal with a piece of metal functioning as a ground then, unscrew the nut on the negative terminal of the battery and take out the cable. Lift the car to a safe working height and support it using jackstands on the rear part of the car. Place a drain pan with a capacity of not less than sixteen gallons under the drain cap, remove the fuel tank drain cap, and let the tank drain as long as necessary before replacing the cap. Pull off the vapor hose, unscrew the fuel filler neck hose clam and separate the fuel filler neck hose from the fuel inlet pipe. Put a transmission jack or floor jack in a position to the fuel tank but put a plywood on the head of the jack to avoid scratching it. Pull both of the Fuel Pump and leak detection electrical connectors, the EVAP line and the quick-connect fitting on the fuel supply hose. Loosen and take out the bolts that holds the fuel tank straps and then slowly dropped the fuel tank of the vehicle. For installation, the process done in the reverse way with the reminder of making sure that the fuel tank strap bolts are tightened and the engine started to look for any leaks at the fuel line connectors that were removed.
