How to adjust and replace the hood latch and release cable on Chrysler Sebring?

Disconnect the hood ajar sensor's electrical connector if present. Remove the bolts holding the hood latch to the radiator support and detach the latch. Adjust the hood's position by loosening the bolts and moving the latch. Detach the hood release cable and remove the latch. To install, reverse the removal process. Release the cable end and slide it into the hood latch's keyhole slot. Remove the cable from the latch. In the passenger compartment, detach the hood release cable and handle assembly. Remove the rubber cable insulator under the dash. Connect a string to the cable, detach it and pull it through the firewall. Connect the string to the new cable and pull it through the firewall. Reverse the removal process to complete the installation.

Genuine Chrysler Sebring Hood Cable

Hood Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Hood Cables found

View related parts
Chrysler Sebring Cable-Hood Latch
Part Number: 4389822AB
$76.59 MSRP: $114.00
You Save: $37.41 (33%)
ADD TO CART
Product Specifications
- Other Name: Release Hood Latch
- Replaced by: 4389822AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Sebring | Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, Touring Convertible, Touring Sedan | 4 Cyl 2.4L, 6 Cyl 2.7L, 6 Cyl 3.5L
View related parts
Chrysler Sebring Cable-Hood Latch
Part Number: 4389822AC
$76.59 MSRP: $114.00
You Save: $37.41 (33%)
ADD TO CART
Product Specifications
- Other Name: Release Hood Latch
- Replaced by: 4389822AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Chrysler Sebring | Limited Convertible, Limited Sedan, LX Convertible, Touring Convertible, Touring Sedan | 4 Cyl 2.4L, 6 Cyl 2.7L, 6 Cyl 3.5L
View related parts
Chrysler Sebring Cable-Hood Lock Release
Part Number: MR271734
Product Specifications
- Other Name: Cable Hood Lock Release; Release Cable
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler Sebring | Base, LX | 4 Cyl 2.4L, 6 Cyl 3.0L

Chrysler Sebring Hood Cable

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler Sebring Hood Cable at great affordable prices. Moreover, all genuine Chrysler Sebring Hood Cable come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Chrysler Sebring Hood Cable Parts Questions & Experts Answers

Cable-Hood Latch
4389822AB
Q: How to adjust and replace the hood latch and release cable on Chrysler Sebring?
A: Disconnect the hood ajar sensor's electrical connector if present. Remove the bolts holding the hood latch to the radiator support and detach the latch. Adjust the hood's position by loosening the bolts and moving the latch. Detach the hood release cable and remove the latch. To install, reverse the removal process. Release the cable end and slide it into the hood latch's keyhole slot. Remove the cable from the latch. In the passenger compartment, detach the hood release cable and handle assembly. Remove the rubber cable insulator under the dash. Connect a string to the cable, detach it and pull it through the firewall. Connect the string to the new cable and pull it through the firewall. Reverse the removal process to complete the installation.