How to remove the power steering pump on Chrysler Sebring?

Disconnect the cable from the negative terminal of the battery. For the 2.4L engine, remove the fluid from the reservoir using a suction pump or equivalent. Raise the vehicle and securely support it on jackstands. Remove the engine beauty cover and disconnect the pressure hose bracket. Disconnect the pressure line and supply hose from the pump. Remove the drivebelt. Remove the pump mounting bolts through the pulley openings. Remove the power steering pump for the 2.7L engine. For the 2.7L engine, remove the fluid from the reservoir using a suction pump or equivalent, then disconnect the fluid supply hose at the pump. Loosen the right front wheel lug nuts. Raise the vehicle and securely support it on jackstands. Remove the right front wheel. Remove the drivebelt. Remove the driveaxle/hub nut while an assistant depresses the brake pedal. Detach the tie-rod end from the steering knuckle. Remove the balljoint nut and separate the balljoint from the knuckle using tool 9360 or a suitable equivalent. Lift the knuckle up and out of the control arm and pull the driveaxle out of the knuckle. Remove the driveaxle. Disconnect the power steering pressure line from the pump and remove the pump mounting bracket bolt. Remove the other two pump bracket bolts and remove the pump and bracket from the engine by rotating the pump so the pulley faces the engine. The pump will come out through the gap made when the half shaft was removed. Remove the pump bolts through the gaps in the pump pulley. Separate the pump from the bracket for the 2.7L engine. For the 3.5L engine, remove the fluid from the reservoir using a suction pump or equivalent. Remove the engine cover and unscrew the tube nut on the pressure line at the pump side. Remove the pressure line bracket from the cylinder head. Detach the supply hose from the power steering pump fitting. Loosen the right front wheel lug nuts. Raise the vehicle and securely support it on jackstands. Remove the right front wheel. Remove the right engine mount bracket nuts. Place a floor jack with a block of wood under the engine just below the oil pan. Raise the jack until the wood block just comes in contact with the oil pan. Slowly raise the jack until all three power steering mounting bolts are visible, remove the bolts, then remove the pump for the 3.5L engine. For the 3.

Genuine Chrysler Sebring Power Steering Pump

Power Steering Pump Unit

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

25 Power Steering Pumps found

View related parts
Chrysler Sebring Power Steering Pump
Part Number: 5151016AB
$241.38 MSRP: $367.00
You Save: $125.62 (35%)
ADD TO CART
Product Specifications
- Other Name: Pump-Power Steering
- Replaced by: 5151016AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Chrysler Sebring | Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, Touring Sedan | 4 Cyl 2.4L
View related parts
Chrysler Sebring Power Steering Pump
Part Number: R5151016AD
$223.30
ADD TO CART
Product Specifications
- Other Name: Pump-Power Steering
- Replaced by: R5151016AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Limited Sedan, LX Convertible, LX Sedan, Touring Sedan | 4 Cyl 2.4L
View related parts
Chrysler Sebring Power Steering Pump
Part Number: 5151016AD
$241.38 MSRP: $367.00
You Save: $125.62 (35%)
ADD TO CART
Product Specifications
- Other Name: Pump-Power Steering
- Replaced by: 5151016AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chrysler Sebring | Limited Sedan, LX Convertible, LX Sedan, Touring Sedan | 4 Cyl 2.4L
View related parts
Chrysler Sebring Power Steering Pump
Part Number: R4766044AA
$151.56 MSRP: $228.00
You Save: $76.44 (34%)
ADD TO CART
Product Specifications
- Other Name: Pump-Power Steering
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, Touring Sedan | 6 Cyl 3.5L
View related parts
Chrysler Sebring Steering Power Steering Pump
Part Number: 5151017AC
$96.72 MSRP: $142.00
You Save: $45.28 (32%)
ADD TO CART
Product Specifications
- Other Name: Pump-Power Steering
- Replaced by: 5151017AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Chrysler Sebring | Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, Touring Sedan
View related parts
Chrysler Sebring Power Steering Pump
Part Number: 4766041AA
$215.90 MSRP: $318.00
You Save: $102.10 (33%)
ADD TO CART
Product Specifications
- Other Name: Pump-Power Steering
- Replaced by: 4766041AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Chrysler Sebring | Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, Touring Convertible, Touring Sedan | 6 Cyl 2.7L
View related parts
Chrysler Sebring Power Steering Pump
Part Number: 4764421AA
$204.62 MSRP: $302.00
You Save: $97.38 (33%)
ADD TO CART
Product Specifications
- Other Name: Pump-Power Steering
- Replaced by: 4764421AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler Sebring | Base Convertible, Base Sedan, GTC Convertible, Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, LXi Convertible, LXi Sedan, Touring Convertible, Touring Sedan, TSI Sedan | 6 Cyl 2.7L
View related parts
Chrysler Sebring Power Steering Pump
Part Number: 4764421AB
$201.73 MSRP: $302.00
You Save: $100.27 (34%)
ADD TO CART
Product Specifications
- Other Name: Pump-Power Steering
- Replaces: 4764421AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2006 Chrysler Sebring | Base Convertible, Base Sedan, GTC Convertible, LX Convertible, LX Sedan, LXi Convertible, LXi Sedan, Limited Convertible, Limited Sedan, TSI Sedan, Touring Convertible, Touring Sedan | 6 Cyl 2.7L
View related parts
Chrysler Sebring Power Steering Pump
Part Number: MN101150
$427.02 MSRP: $492.00
You Save: $64.98 (14%)
ADD TO CART
Product Specifications
- Other Name: Pump-Power Steering ; Oil Pump Assy P/S
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2005 Chrysler Sebring | Limited, LX, LXi | 6 Cyl 3.0L
View related parts
Chrysler Sebring Power Steering Pump
Part Number: R4766041AB
Product Specifications
- Other Name: Pump-Power Steering
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chrysler Sebring | Limited Sedan, LX Sedan, Touring Convertible, Touring Sedan | 6 Cyl 2.7L
View related parts
Chrysler Sebring Power Steering Pump
Part Number: 4656034
Product Specifications
- Other Name: Pump Power Steering
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2000 Chrysler Sebring | JX, JXi | 4 Cyl 2.0L, 4 Cyl 2.4L, 6 Cyl 2.5L
View related parts
Chrysler Sebring Power Steering Pump
Part Number: 4656062
Product Specifications
- Other Name: Pump-Power Steering
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2000 Chrysler Sebring | JX, JXi | 4 Cyl 2.4L, 6 Cyl 2.5L
View related parts
Chrysler Sebring Power Steering Pump
Part Number: MB910655
Product Specifications
- Other Name: Pump Power Steering
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1998 Chrysler Sebring | LX | 4 Cyl 2.0L
View related parts
Chrysler Sebring Power Steering Pump
Part Number: MR512729
Product Specifications
- Other Name: Pump-Power Steering
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Chrysler Sebring | LX | 4 Cyl 2.4L
View related parts
Chrysler Sebring Power Steering Pump
Part Number: R101149M
Product Specifications
- Other Name: Pump-Power Steering
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2005 Chrysler Sebring | Base, LX | 4 Cyl 2.4L
View related parts
Chrysler Sebring Power Steering Pump
Part Number: R4656062
Product Specifications
- Other Name: Pump-Power Steering
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2000 Chrysler Sebring | JX, JXi | 4 Cyl 2.4L, 6 Cyl 2.5L
View related parts
Chrysler Sebring Power Steering Pump
Part Number: R4764421AB
Product Specifications
- Other Name: Pump-Power Steering
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2006 Chrysler Sebring | Base Convertible, Base Sedan, GTC Convertible, Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, LXi Convertible, LXi Sedan, Touring Convertible, Touring Sedan, TSI Sedan | 6 Cyl 2.7L
View related parts
Chrysler Sebring Power Steering Pump
Part Number: R4764718AC
Product Specifications
- Other Name: Pump-Power Steering
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2006 Chrysler Sebring | Base Convertible, Base Sedan, GTC Convertible, Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, LXi Sedan, Touring Sedan | 4 Cyl 2.4L
View related parts
Chrysler Sebring Power Steering Pump
Part Number: R4874243
Product Specifications
- Other Name: Pump-Power Steering
- Replaces: 4874243
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996 Chrysler Sebring | JX, JXi | 4 Cyl 2.4L, 6 Cyl 2.5L
View related parts
Chrysler Sebring Power Steering Pump
Part Number: 5151017AD
Product Specifications
- Other Name: Pump-Power Steering
- Replaces: 5151017AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | LX Convertible, LX Sedan, Limited Convertible, Limited Sedan, Touring Sedan

| Page 1 of 2 |Next >

1-20 of 25 Results

Chrysler Sebring Power Steering Pump

The Power Steering Pump in Chrysler Sebring helps in converting energy from the engine for instance optimal energy to hydraulic energy to making steering easier. This pump works through application of fluid pressure that is used in controlling the movement of the car, especially during slow movement of the car, or even when the car is stationary. The pump is usually connected to the engine crankshaft by using V belt or serpentine belt and has an associated fluid container, which may encased or detached. Chrysler sebring models have used hydraulic power steering systems which retain a mechanical link with the steering wheels so as to afford manual steering in case the power mechanism fails. The main design has been preserved, but variations in tuning have been used to address the preferences regarding driving with focusing the levels of assistance for standard and performance cars. Problems associated with Chrysler Sebring Power Steering Pump include the following, leakage, noises and variations in the power steering assistance which may require inspection or replacement.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler Sebring Power Steering Pump at great affordable prices. Moreover, all genuine Chrysler Sebring Power Steering Pump come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Chrysler Sebring Power Steering Pump Parts Questions & Experts Answers

Power Steering Pump
5151016AB
Q: How to remove the power steering pump on Chrysler Sebring?
A: Disconnect the cable from the negative terminal of the battery. For the 2.4L engine, remove the fluid from the reservoir using a suction pump or equivalent. Raise the vehicle and securely support it on jackstands. Remove the engine beauty cover and disconnect the pressure hose bracket. Disconnect the pressure line and supply hose from the pump. Remove the drivebelt. Remove the pump mounting bolts through the pulley openings. Remove the power steering pump for the 2.7L engine. For the 2.7L engine, remove the fluid from the reservoir using a suction pump or equivalent, then disconnect the fluid supply hose at the pump. Loosen the right front wheel lug nuts. Raise the vehicle and securely support it on jackstands. Remove the right front wheel. Remove the drivebelt. Remove the driveaxle/hub nut while an assistant depresses the brake pedal. Detach the tie-rod end from the steering knuckle. Remove the balljoint nut and separate the balljoint from the knuckle using tool 9360 or a suitable equivalent. Lift the knuckle up and out of the Control Arm and pull the driveaxle out of the knuckle. Remove the driveaxle. Disconnect the power steering pressure line from the pump and remove the pump mounting bracket bolt. Remove the other two pump bracket bolts and remove the pump and bracket from the engine by rotating the pump so the pulley faces the engine. The pump will come out through the gap made when the half shaft was removed. Remove the pump bolts through the gaps in the pump pulley. Separate the pump from the bracket for the 2.7L engine. For the 3.5L engine, remove the fluid from the reservoir using a suction pump or equivalent. Remove the engine cover and unscrew the tube nut on the pressure line at the pump side. Remove the pressure line bracket from the cylinder head. Detach the supply hose from the power steering pump fitting. Loosen the right front wheel lug nuts. Raise the vehicle and securely support it on jackstands. Remove the right front wheel. Remove the right engine mount bracket nuts. Place a floor jack with a block of wood under the engine just below the oil pan. Raise the jack until the wood block just comes in contact with the oil pan. Slowly raise the jack until all three power steering mounting bolts are visible, remove the bolts, then remove the pump for the 3.5L engine. For the 3.

Related Chrysler Sebring Parts

Browse by Year

2010 Power Steering Pump 2009 Power Steering Pump 2008 Power Steering Pump 2007 Power Steering Pump 2006 Power Steering Pump 2005 Power Steering Pump 2004 Power Steering Pump 2003 Power Steering Pump 2002 Power Steering Pump 2001 Power Steering Pump 2000 Power Steering Pump 1999 Power Steering Pump 1998 Power Steering Pump 1997 Power Steering Pump 1996 Power Steering Pump 1995 Power Steering Pump