How do you remove the front and rear bumper covers on Chrysler Town & Country?

To remove the front bumper cover, the first step is to set the hood latch and open the hood, the other is to take out the fasteners that attach the grille to the radiator support and the upper mounting fasteners of the front bumper cover. Moving on, further take out the headlight housing, afterwards the bolts that hold the bumper cover to the headlight mounting panel on either side of the grille. Jack up the car and use jackstands to support it after that, remove the front wheels. There are some screws in this region; unscrew the fasteners for the front inner fender splash shield to accommodate the bolts for the fixing of the front cover to the fender and also the fasteners for the bottom of the bumper cover. If required, remove the fog light, parking, and turn signal electrical connector before the removal of the bumper cover from the car; the procedure for installation is the reverse of the removal one. For the rear bumper cover, stand the rear of the car off the ground, with the liftgate open, and supported on jackstands. The upper mounting fasteners are to be relaxed first and taking out the lower ones that hold the bumper cover in place. If so configurated, then disconnect the parking assist electrical connector, pull the hooks on the sides of the bumper cover out of the tabs in the rear cover brackets and then to remove the rear bumper cover from the vehicle and the installation process is the reverse of the removal process.

Genuine Chrysler Town & Country Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

78 Bumpers found

View related parts
Chrysler Town & Country Bumper Cover Rear
Part Number: 68125727AB
$436.41 MSRP: $779.00
You Save: $342.59 (44%)
ADD TO CART
Product Specifications
- Other Name: FASCIA Rear Primed
- Replaced by: 68125727AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2016 Chrysler Town & Country | Limited, Limited Platinum, LX, S, Touring, Touring L, Touring-L | 6 Cyl 3.6L
View related parts
Chrysler Town & Country Rear Bumper Cover
Part Number: 68125727AA
$436.41 MSRP: $779.00
You Save: $342.59 (44%)
ADD TO CART
Product Specifications
- Other Name: FASCIA Rear Primed
- Replaced by: 68125727AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Chrysler Town & Country | Gold, Limited, LX, S, Touring, Touring L | 6 Cyl 3.6L
View related parts
Chrysler Town & Country Rear Bumper Cover
Part Number: 68125725AB
$513.60 MSRP: $776.00
You Save: $262.40 (34%)
ADD TO CART
Product Specifications
- Other Name: FASCIA Rear Primed
- Position: Rear
- Replaced by: 68125725AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2016 Chrysler Town & Country | Limited, Limited Platinum, LX, S, Touring, Touring L, Touring-L | 6 Cyl 3.6L
View related parts
Chrysler Town & Country Rear Bumper Cover
Part Number: 68125724AB
$503.70 MSRP: $734.00
You Save: $230.30 (32%)
ADD TO CART
Product Specifications
- Other Name: FASCIA Rear Primed
- Replaced by: 68125724AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2016 Chrysler Town & Country | Limited, Limited Platinum, LX, S, Touring, Touring L, Touring-L | 6 Cyl 3.6L
View related parts
Chrysler Town & Country Original Bumper Cover
Part Number: 68088967AA
$464.94 MSRP: $678.00
You Save: $213.06 (32%)
ADD TO CART
Product Specifications
- Other Name: Fascia Front Primed; Bumper Cover
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2016 Chrysler Town & Country | Gold, Limited, Limited Platinum, LX, S, Touring, Touring L, Touring-L | 6 Cyl 3.6L
View related parts
Chrysler Town & Country Rear Bumper Cover
Part Number: 4740391
$426.35 MSRP: $542.54
You Save: $116.19 (22%)
ADD TO CART
Product Specifications
- Other Name: Fascia Asm Rear Ply Premiu ; Fascia, P.A.R.; Bumper Cover
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1995 Chrysler Town & Country | Base AWD, Base FWD | 6 Cyl 3.8L
View related parts
Chrysler Town & Country Rear Bumper Cover
Part Number: 5139122AA
$355.68 MSRP: $521.00
You Save: $165.32 (32%)
ADD TO CART
Product Specifications
- Other Name: FASCIA Rear Primed
- Replaced by: 5139122AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2007 Chrysler Town & Country | EX, Limited FWD, LX FWD, Touring FWD | 6 Cyl 3.3L, 6 Cyl 3.8L
View related parts
Chrysler Town & Country Rear Bumper Cover
Part Number: 5018617AA
$490.20 MSRP: $717.00
You Save: $226.80 (32%)
ADD TO CART
Product Specifications
- Other Name: FASCIA Rear Primed; Bumper Cover
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005 Chrysler Town & Country | EX, Limited FWD, LX FWD, Touring FWD | 6 Cyl 3.3L, 6 Cyl 3.8L
View related parts
Chrysler Town & Country Rear Bumper Cover
Part Number: 68125726AB
$513.96 MSRP: $749.00
You Save: $235.04 (32%)
ADD TO CART
Product Specifications
- Other Name: FASCIA Rear Primed
- Position: Rear
- Replaced by: 68125726AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2016 Chrysler Town & Country | Limited, Limited Platinum, LX, S, Touring, Touring L, Touring-L | 6 Cyl 3.6L
View related parts
Chrysler Town & Country Rear Bumper Cover
Part Number: 68125724AA
$503.70 MSRP: $734.00
You Save: $230.30 (32%)
ADD TO CART
Product Specifications
- Other Name: FASCIA Rear Primed
- Replaced by: 68125724AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2014 Chrysler Town & Country | Limited, S, Touring, Touring L | 6 Cyl 3.6L
View related parts
Chrysler Town & Country Rear Bumper Cover
Part Number: 5018618AA
$552.90 MSRP: $809.00
You Save: $256.10 (32%)
ADD TO CART
Product Specifications
- Other Name: FASCIA Rear Primed; Bumper Cover
- Position: Rear
- Replaces: 5018619AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2004 Chrysler Town & Country | Base, EL, EX, Limited AWD, Limited FWD, LX AWD, LX FWD, LXi AWD, LXi FWD, Touring AWD, Touring FWD | 6 Cyl 3.3L, 6 Cyl 3.5L, 6 Cyl 3.8L
View related parts
Chrysler Town & Country Front Bumperpainted Black
Part Number: 1BG23TZZAA
$500.28 MSRP: $729.00
You Save: $228.72 (32%)
ADD TO CART
Product Specifications
- Other Name: Fascia-Front
- Position: Front
- Replaced by: 1BG23TZZAC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chrysler Town & Country | Limited, LX, Touring, Touring Plus | 6 Cyl 3.3L, 6 Cyl 3.6L, 6 Cyl 3.8L, 6 Cyl 4.0L
View related parts
Chrysler Town & Country Rear Bumper Cover
Part Number: 68125726AA
$513.96 MSRP: $749.00
You Save: $235.04 (32%)
ADD TO CART
Product Specifications
- Other Name: FASCIA Rear Primed
- Position: Rear
- Replaced by: 68125726AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Chrysler Town & Country | Gold, Limited, LX, S, Touring, Touring L | 6 Cyl 3.6L
View related parts
Chrysler Town & Country Front Bumper Cover
Part Number: 68146588AA
$206.42 MSRP: $307.00
You Save: $100.58 (33%)
ADD TO CART
Product Specifications
- Other Name: Fascia Front Primed
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2016 Chrysler Town & Country | Limited, Limited Platinum, LX, S, Touring, Touring L, Touring-L | 6 Cyl 3.6L
View related parts
Chrysler Town & Country Front Bumper Cover
Part Number: 68146587AA
$203.04 MSRP: $302.00
You Save: $98.96 (33%)
ADD TO CART
Product Specifications
- Other Name: Fascia Front Primed
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2016 Chrysler Town & Country | Limited, Limited Platinum, LX, S, Touring, Touring L, Touring-L | 6 Cyl 3.6L
View related parts
Chrysler Town & Country Rear Bumper Cover
Part Number: 5018630AA
$434.34 MSRP: $635.00
You Save: $200.66 (32%)
ADD TO CART
Product Specifications
- Other Name: FASCIA Rear Primed; Bumper Cover
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2007 Chrysler Town & Country | Base | 6 Cyl 3.3L
View related parts
Chrysler Town & Country Front Bumper Cover
Part Number: 1KG12TZZAB
$963.30 MSRP: $1415.00
You Save: $451.70 (32%)
ADD TO CART
Product Specifications
- Other Name: Fascia-Front
- Replaced by: 1KG12TZZAC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Chrysler Town & Country | Limited, LX, Touring, Touring Plus | 6 Cyl 3.3L, 6 Cyl 3.6L, 6 Cyl 3.8L, 6 Cyl 4.0L
View related parts
Chrysler Town & Country Rear Bumper Cover
Part Number: 68041480AB
$414.96 MSRP: $608.00
You Save: $193.04 (32%)
ADD TO CART
Product Specifications
- Other Name: FASCIA-Rear
- Position: Rear
- Replaced by: 68041480AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Chrysler Town & Country | Limited, LX, Touring | 6 Cyl 3.3L, 6 Cyl 3.8L, 6 Cyl 4.0L
View related parts
Chrysler Town & Country Rear Bumper Cover
Part Number: 68041480AC
$414.96 MSRP: $608.00
You Save: $193.04 (32%)
ADD TO CART
Product Specifications
- Other Name: FASCIA-Rear
- Replaced by: 68041480AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Chrysler Town & Country | Limited, LX, Touring, Touring Plus | 6 Cyl 3.3L, 6 Cyl 3.6L, 6 Cyl 3.8L, 6 Cyl 4.0L
View related parts
Chrysler Town & Country Rear Bumper Cover
Part Number: 68048162AA
$505.02 MSRP: $739.00
You Save: $233.98 (32%)
ADD TO CART
Product Specifications
- Other Name: FASCIA-Rear
- Position: Rear
- Replaced by: 68048162AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Chrysler Town & Country | Limited, LX, Touring | 6 Cyl 3.3L, 6 Cyl 3.8L, 6 Cyl 4.0L

| Page 1 of 4 |Next >

1-20 of 78 Results

Chrysler Town & Country Bumper

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler Town & Country Bumper at great affordable prices. Moreover, all genuine Chrysler Town & Country Bumper come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Chrysler Town & Country Bumper Parts Questions & Experts Answers

Town Country-Bumper Cover
5018610AA
Q: How do you remove the front and rear bumper covers on Chrysler Town & Country?
A: To remove the front bumper cover, the first step is to set the Hood Latch and open the hood, the other is to take out the fasteners that attach the Grille to the radiator support and the upper mounting fasteners of the front bumper cover. Moving on, further take out the headlight housing, afterwards the bolts that hold the bumper cover to the headlight mounting panel on either side of the grille. Jack up the car and use jackstands to support it after that, remove the front wheels. There are some screws in this region; unscrew the fasteners for the front inner fender splash shield to accommodate the bolts for the fixing of the front cover to the fender and also the fasteners for the bottom of the bumper cover. If required, remove the fog light, parking, and turn signal electrical connector before the removal of the bumper cover from the car; the procedure for installation is the reverse of the removal one. For the rear bumper cover, stand the rear of the car off the ground, with the liftgate open, and supported on jackstands. The upper mounting fasteners are to be relaxed first and taking out the lower ones that hold the bumper cover in place. If so configurated, then disconnect the parking assist electrical connector, pull the hooks on the sides of the bumper cover out of the tabs in the rear cover brackets and then to remove the rear bumper cover from the vehicle and the installation process is the reverse of the removal process.