How do you remove and reinstall the camshaft and related components in four cylinder engine on Chrysler Town & Country?

To get access to the valve cover, timing belt, camshaft sprockets and the rear timing belt cover, first locate the camshaft bearing caps, they are numbered and they indicate the position on the cylinder head. Both the outer and the other bearing caps can be taken off; it is advisable to loosen the bolts gently for the avoidance of any kind of outer camshaft distortion and the working of the bolt in a circular pattern beginning with the center cap bolts. If the bearing caps are very tight then use the bolts as leverage and then hit the cap with a softer rubber headed hammer. That way store the caps for reinstallation some time in the future. Now, lift out of the crank case the camshafts, and label them as INTAKE and EXHAUST so they are not reversed. Take off the front seal from all the camshafts and check the conditions of the rocker arms and lash adjusters. Scrub the camshaft(s) as well as the gasket surface and see whether there are signs of wear or damages to the camshaft bearing journals, as well as measuring the camshaft bearing journal diameters and bearing surfaces for signs of scoring. Replace them with new ones when this is the case and also clean the cylinder head, preferably at an automotive machine shop. Coat the camshaft(s) and the cylinder head bearing journals with clean engine oil and then slot the camshaft back in its position but do not fit the rocker arms. Put back the rear bearing cap and torque up the bolts and with the use of dial indicator, check for camshaft endplay by taking the camshaft to full rear and front and measure the travel as compared to the standard limit set for it. To assemble, position the valve lash adjusters and the rocker arms, it is also important to clean and lubricate the camshaft and the bearing journals and then gently fit the camshafts back into their original positions as the timing marks should align. Bolt the few bearing caps excluding the no 1 and no 6 ending caps evenly to the standard optimistic torque. Use anaerobic sealant to sealing surfaces of bearing caps of No. 1 and No. 6 then fit the bearing caps and snug tight the bolts. Last but not least replace camshaft oil seal, timing belt, covers and related part; start the engine to look for oil leakage.

Genuine Chrysler Town & Country Camshaft

Cam

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

22 Camshafts found

View related parts
Chrysler Town & Country Engine Exhaust Camshaft
Part Number: 4781679AA
$212.93 MSRP: $443.00
You Save: $230.07 (52%)
ADD TO CART
Product Specifications
- Other Name: Camshaft-Exhaust
- Replaced by: 4781679AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2005 Chrysler Town & Country | Base, EL, LX FWD, LXi FWD
View related parts
Chrysler Town & Country Engine Intake Camshaft
Part Number: 5184380AF
$328.90 MSRP: $504.00
You Save: $175.10 (35%)
ADD TO CART
Product Specifications
- Other Name: Camshaft-Intake
- Replaced by: 5184380AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2016 Chrysler Town & Country | Gold, Limited, Limited Platinum, LX, S, Touring, Touring L, Touring-L | 6 Cyl 3.6L
View related parts
Chrysler Town & Country Engine Intake Camshaft
Part Number: 5184379AF
$328.90 MSRP: $504.00
You Save: $175.10 (35%)
ADD TO CART
Product Specifications
- Other Name: Camshaft-Intake
- Replaced by: 5184379AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2016 Chrysler Town & Country | Gold, Limited, Limited Platinum, LX, S, Touring, Touring L, Touring-L | 6 Cyl 3.6L
View related parts
Chrysler Town & Country Engine Exhaust Camshaft
Part Number: 5184377AF
$343.20 MSRP: $525.00
You Save: $181.80 (35%)
ADD TO CART
Product Specifications
- Other Name: Camshaft-Exhaust
- Replaced by: 5184377AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2016 Chrysler Town & Country | Gold, Limited, Limited Platinum, LX, S, Touring, Touring L, Touring-L | 6 Cyl 3.6L
View related parts
Chrysler Town & Country Engine Exhaust Camshaft Right
Part Number: 5184378AF
$328.90 MSRP: $504.00
You Save: $175.10 (35%)
ADD TO CART
Product Specifications
- Other Name: Camshaft-Exhaust
- Position: Passenger Side
- Replaced by: 5184378AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2016 Chrysler Town & Country | Gold, Limited, Limited Platinum, LX, S, Touring, Touring L, Touring-L | 6 Cyl 3.6L
View related parts
Chrysler Town & Country Engine Intake Camshaft
Part Number: 4781681AB
$289.30 MSRP: $443.00
You Save: $153.70 (35%)
ADD TO CART
Product Specifications
- Other Name: Camshaft-Intake; Camshaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chrysler Town & Country
View related parts
Chrysler Town & Country Engine Camshaft
Part Number: 4781061AA
$322.20 MSRP: $490.00
You Save: $167.80 (35%)
ADD TO CART
Product Specifications
- Other Name: Camshaft-Engine; Camshaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2010 Chrysler Town & Country | Base, EL, EX, Limited, Limited AWD, Limited FWD, LX, LX AWD, LX FWD, LXi AWD, LXi FWD, Touring, Touring AWD, Touring FWD, Touring Plus | 6 Cyl 3.8L
View related parts
Chrysler Town & Country Engine Exhaust Camshaft
Part Number: 4781679AB
$289.30 MSRP: $443.00
You Save: $153.70 (35%)
ADD TO CART
Product Specifications
- Other Name: Camshaft-Exhaust; Camshaft
- Replaces: 4781679AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2007 Chrysler Town & Country | Base, EL, LX FWD, LXi FWD
View related parts
Chrysler Town & Country Engine Intake Camshaft
Part Number: 68027449AC
$347.70 MSRP: $509.00
You Save: $161.30 (32%)
ADD TO CART
Product Specifications
- Other Name: Camshaft-Intake
- Replaced by: 68245425AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2013 Chrysler Town & Country
- 2011 Chrysler Town & Country
View related parts
Chrysler Town & Country Engine Intake Camshaft
Part Number: 68027449AB
$347.70 MSRP: $509.00
You Save: $161.30 (32%)
ADD TO CART
Product Specifications
- Other Name: Camshaft-Intake
- Replaced by: 68245425AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chrysler Town & Country | Limited, LX, Touring, Touring Plus
View related parts
Chrysler Town & Country Engine Exhaust Camshaft
Part Number: 68027450AA
$323.74 MSRP: $479.00
You Save: $155.26 (33%)
Product Specifications
- Other Name: Camshaft-Exhaust
- Replaced by: 68244165AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2013 Chrysler Town & Country
- 2008-2011 Chrysler Town & Country | LX, Limited, Touring, Touring Plus
View related parts
Chrysler Town & Country Engine Camshaft
Part Number: 4448049
Product Specifications
- Other Name: CAMSHAFT
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1990-1993 Chrysler Town & Country | Base AWD, Base FWD | 6 Cyl 3.3L
View related parts
Chrysler Town & Country Engine Camshaft
Part Number: 4621685
Product Specifications
- Other Name: CAMSHAFT
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-2000 Chrysler Town & Country | Base AWD, Base FWD, Limited AWD, Limited FWD, LX AWD, LX FWD, LX Long Wheelbase AWD, LX Long Wheelbase FWD, LX Short Wheelbase FWD, LXi AWD, LXi FWD, SX | 6 Cyl 3.3L, 6 Cyl 3.8L
View related parts
Chrysler Town & Country Exhaust Camshaft
Part Number: 4694681AA
Product Specifications
- Other Name: Camshaft Exhaust; Camshaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2000 Chrysler Town & Country
View related parts
Chrysler Town & Country Engine Camshaft
Part Number: 4781013AA
Product Specifications
- Other Name: Camshaft-Engine; Camshaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2007 Chrysler Town & Country | Base, EL, Limited FWD, LX FWD, LXi FWD | 6 Cyl 3.3L
View related parts
Chrysler Town & Country Exhaust Camshaft
Part Number: 4781271AA
Product Specifications
- Other Name: Camshaft Exhaust
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001 Chrysler Town & Country
View related parts
Chrysler Town & Country Engine Intake Camshaft
Part Number: 4781681AA
Product Specifications
- Other Name: Camshaft-Intake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2005 Chrysler Town & Country | Base, EL, LX FWD, LXi FWD
View related parts
Chrysler Town & Country Right Camshaft Assembly
Part Number: MD145655
Product Specifications
- Other Name: Camshaft Rh ; Camshaft Assembly, (B)- Rt.; Camshaft
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2000 Chrysler Town & Country | LX FWD, LXi FWD, SX
- 1990-1996 Chrysler Town & Country | LX Long Wheelbase FWD, LX Short Wheelbase FWD | 6 Cyl 3.0L
View related parts
Chrysler Town & Country Engine Intake Camshaft
Part Number: 4781678AA
Product Specifications
- Other Name: Camshaft-Intake; Camshaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002 Chrysler Town & Country | LX FWD, LXi FWD
View related parts
Chrysler Town & Country Engine Camshaft
Part Number: 4666100AA
Product Specifications
- Other Name: Camshaft-Engine; Camshaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chrysler Town & Country | Limited, LX, Touring | 6 Cyl 3.3L

| Page 1 of 2 |Next >

1-20 of 22 Results

Chrysler Town & Country Camshaft

The Camshaft in Chrysler Town & Country vehicles helps the control of the engine's intake and exhaust valves which allows the entry of this air/fuel mixture and the ejection of exhaust gases. Usually made of iron or steel materials, the Camshaft applies itself through as Over Head Valve (OHV), Single Over Head Camend (SOHC), and Double Over Head Camend (DOHC) jeopardizing on performance rate. Chrysler Town & Country models rotates the camshafts through the crankshaft to guarantee that the valves open and shut at the right time. camshafts are mainly performance-oriented where it can increase power and efficiency through higher lift and longer duration of the intake air. When selecting a camshaft, factors such as the Lobe Separation Angle (LSA) have an emphatic influence on torque and RPM performance levels thus creating unique performance-oriented vehicles.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler Town & Country Camshaft at great affordable prices. Moreover, all genuine Chrysler Town & Country Camshaft come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Chrysler Town & Country Camshaft Parts Questions & Experts Answers

Engine Camshaft
4781061AA
Q: How do you remove and reinstall the camshaft and related components in four cylinder engine on Chrysler Town & Country?
A: To get access to the valve cover, Timing Belt, camshaft sprockets and the rear timing belt cover, first locate the camshaft bearing caps, they are numbered and they indicate the position on the Cylinder Head. Both the outer and the other bearing caps can be taken off; it is advisable to loosen the bolts gently for the avoidance of any kind of outer camshaft distortion and the working of the bolt in a circular pattern beginning with the center cap bolts. If the bearing caps are very tight then use the bolts as leverage and then hit the cap with a softer rubber headed hammer. That way store the caps for reinstallation some time in the future. Now, lift out of the crank case the camshafts, and label them as INTAKE and EXHAUST so they are not reversed. Take off the front seal from all the camshafts and check the conditions of the Rocker Arms and Lash Adjusters. Scrub the camshaft(s) as well as the gasket surface and see whether there are signs of wear or damages to the camshaft bearing journals, as well as measuring the camshaft bearing journal diameters and bearing surfaces for signs of scoring. Replace them with new ones when this is the case and also clean the cylinder head, preferably at an automotive machine shop. Coat the camshaft(s) and the cylinder head bearing journals with clean engine oil and then slot the camshaft back in its position but do not fit the rocker arms. Put back the rear bearing cap and torque up the bolts and with the use of dial indicator, check for camshaft endplay by taking the camshaft to full rear and front and measure the travel as compared to the standard limit set for it. To assemble, position the valve lash adjusters and the rocker arms, it is also important to clean and lubricate the camshaft and the bearing journals and then gently fit the camshafts back into their original positions as the timing marks should align. Bolt the few bearing caps excluding the no 1 and no 6 ending caps evenly to the standard optimistic torque. Use anaerobic sealant to sealing surfaces of bearing caps of No. 1 and No. 6 then fit the bearing caps and snug tight the bolts. Last but not least replace camshaft oil seal, timing belt, covers and related part; start the engine to look for oil leakage.