How do you remove and install the crankshaft pulley on Chrysler Town & Country?

Before you attempt to pull the crankshaft pulley off, make sure you loose the cable from the negative terminal of the battery. You have to turn the lug nuts on the right front wheel to a few turns, then jack up the car, and put it on jackstands before you remove the right front wheel. Next pull out the passenger side inner fender splash shield and the serpentine drive belt. Take of the driveplate cover and with a large screwdriver engage the crankshaft in the position then get a helper to use a breaker bar and socket to pull the crankshaft pulley-to-crankshaft bolt. Very gingerly remove the crankshaft pulley with a two jaw puller carefully engaging the inner part of the pulley. Do not pull on the outer rim of the pulley as this may cause damage. There can be beefy in-between the puller bolt and the crankshaft due to some degree of recess of the pulley. During installation, use a://'screw-in tool which is screwed directly to the crankshaft in place of the crankshaft pulley bolt' Clean engine oil or multi-purpose grease shall be applied to the seal contact surface of the damper hub so that there will be no leakage of oil. The crankshaft pulley bolt with the washers as spacers can be used in case of the tool is not available and torque should not be more than the specified value. Last but not the least, re-attach the crankshaft pulley bolt and carry out the step by step reformation of the other parts in reverse method of the elimination phase.

Genuine Chrysler Town & Country Crankshaft Pulley

Crankshaft Pulley Engine Harmonic Balancer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Crankshaft Pulleys found

View related parts
Chrysler Town & Country DAMPER-CRANKSHAFT
Part Number: 5184293AH
$158.76 MSRP: $241.00
You Save: $82.24 (35%)
ADD TO CART
Product Specifications
- Other Name: DAMPER Crankshaft
- Replaces: 5184293AC, 5184293AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2016 Chrysler Town & Country | Gold, LX, Limited, Limited Platinum, S, Touring, Touring L, Touring-L | 6 Cyl 3.6L
View related parts
Chrysler Town & Country DAMPER-CRANKSHAFT
Part Number: 5184293AC
$158.76 MSRP: $241.00
You Save: $82.24 (35%)
ADD TO CART
Product Specifications
- Other Name: DAMPER Crankshaft
- Replaced by: 5184293AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2012 Chrysler Town & Country | Gold, Limited, LX, Touring, Touring L | 6 Cyl 3.6L
View related parts
Chrysler Town & Country DAMPER-CRANKSHAFT
Part Number: 5184293AG
$158.76 MSRP: $241.00
You Save: $82.24 (35%)
ADD TO CART
Product Specifications
- Other Name: DAMPER Crankshaft
- Replaced by: 5184293AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2013-2015 Chrysler Town & Country | Limited, Limited Platinum, LX, S, Touring, Touring L | 6 Cyl 3.6L
View related parts
Chrysler Town & Country DAMPER-CRANKSHAFT
Part Number: 4666099AB
$295.54 MSRP: $441.00
You Save: $145.46 (33%)
ADD TO CART
Product Specifications
- Other Name: DAMPER Crankshaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chrysler Town & Country | Limited, LX, Touring, Touring Plus | 6 Cyl 3.3L, 6 Cyl 3.8L
View related parts
Chrysler Town & Country PULLEY-CRANKSHAFT Air Compressor D
Part Number: MD319994
$27.69 MSRP: $35.24
You Save: $7.55 (22%)
ADD TO CART
Product Specifications
- Other Name: PULLEY Crankshaft; Damper Pulley
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2000 Chrysler Town & Country | LX FWD, LX Long Wheelbase FWD, LX Short Wheelbase FWD, LXi FWD, SX
View related parts
Chrysler Town & Country DAMPER-CRANKSHAFT
Part Number: 68027598AA
$145.51 MSRP: $216.00
You Save: $70.49 (33%)
ADD TO CART
Product Specifications
- Other Name: DAMPER Crankshaft
- Replaced by: 68027598AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2013 Chrysler Town & Country
- 2008-2011 Chrysler Town & Country | LX, Limited, Touring, Touring Plus
View related parts
Chrysler Town & Country DAMPER-CRANKSHAFT
Part Number: MD354781
$190.59 MSRP: $220.00
You Save: $29.41 (14%)
ADD TO CART
Product Specifications
- Other Name: DAMPER Crankshaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2000 Chrysler Town & Country | LX FWD, LXi FWD, SX
View related parts
Chrysler Town & Country DAMPER-CRANKSHAFT
Part Number: MD143435
Product Specifications
- Other Name: PULLEY, Crankshaft - Alternator Drive
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1991-2000 Chrysler Town & Country | LX FWD, LX Long Wheelbase FWD, LX Short Wheelbase FWD, LXi FWD, SX
View related parts
Chrysler Town & Country DAMPER-CRANKSHAFT
Part Number: 4448886
Product Specifications
- Other Name: DAMPER Crankshaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1990-2007 Chrysler Town & Country | Base, Base AWD, Base FWD, EL, EX, Limited AWD, Limited FWD, LX AWD, LX FWD, LX Long Wheelbase AWD, LX Long Wheelbase FWD, LX Short Wheelbase FWD, LXi AWD, LXi FWD, SX, Touring AWD, Touring FWD | 6 Cyl 3.3L, 6 Cyl 3.8L
View related parts
Chrysler Town & Country DAMPER-CRANKSHAFT
Part Number: 4892135AA
Product Specifications
- Other Name: DAMPER Crankshaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chrysler Town & Country | Limited, LX, Touring, Touring Plus | 6 Cyl 4.0L
View related parts
Chrysler Town & Country PULLEY Asm Drive
Part Number: 3870074
Product Specifications
- Other Name: PULLEY, Drive; Crankshaft Pulley, Idler Pulley, Pulley
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1984-1987 Chrysler Town & Country
View related parts
Chrysler Town & Country DAMPER-Engine Vibration
Part Number: 4694268
Product Specifications
- Other Name: DAMPER Engine Vibration
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2003 Chrysler Town & Country | Base, EL, Limited FWD, LX FWD, LX Long Wheelbase FWD, LX Short Wheelbase FWD, LXi FWD, SX
View related parts
Chrysler Town & Country PULLEY-V-Belt Drive
Part Number: 4483413
Product Specifications
- Other Name: PULLEY, Drive; Crankshaft Damper, Crankshaft Pulley, Pulley
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1990-1995 Chrysler Town & Country

Chrysler Town & Country Crankshaft Pulley

For Chrysler Town & Country vehicles, there is known as the Performance Crankshaft Pulley that plays significant role in the power transferring from the engine to other important parts like power steering pump, A/C compressor, and alternation. Due to the fact that torque is obtained directly from the engine crankshaft, the Performance Crankshaft Pulley is able to maintain efficient operation of these systems. Besides, it also acts as the harmonic balancer which helps to reduce vibrations of the engines for improved power output. Chrysler Town & Country has used different varieties of performance crankshaft pulley in the past years where these pulleys have been fashioned to boost the performance of the engine as well as eliminate vibrations. The variations may extend from the design and the material used where these differences are likely to affect the performance and the lifespan of the product.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler Town & Country Crankshaft Pulley at great affordable prices. Moreover, all genuine Chrysler Town & Country Crankshaft Pulley come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Chrysler Town & Country Crankshaft Pulley Parts Questions & Experts Answers

DAMPER-Engine Vibration
4694268
Q: How do you remove and install the crankshaft pulley on Chrysler Town & Country?
A: Before you attempt to pull the crankshaft pulley off, make sure you loose the cable from the negative terminal of the battery. You have to turn the lug nuts on the right front wheel to a few turns, then jack up the car, and put it on jackstands before you remove the right front wheel. Next pull out the passenger side inner fender splash shield and the serpentine drive belt. Take of the driveplate cover and with a large screwdriver engage the crankshaft in the position then get a helper to use a breaker bar and socket to pull the crankshaft pulley-to-crankshaft bolt. Very gingerly remove the crankshaft pulley with a two jaw puller carefully engaging the inner part of the pulley. Do not pull on the outer rim of the pulley as this may cause damage. There can be beefy in-between the puller bolt and the crankshaft due to some degree of recess of the pulley. During installation, use a://'screw-in tool which is screwed directly to the crankshaft in place of the crankshaft pulley bolt' Clean engine oil or multi-purpose grease shall be applied to the seal contact surface of the damper hub so that there will be no leakage of oil. The crankshaft pulley bolt with the washers as spacers can be used in case of the tool is not available and torque should not be more than the specified value. Last but not the least, re-attach the crankshaft pulley bolt and carry out the step by step reformation of the other parts in reverse method of the elimination phase.