Where is the IAT Sensor Located on Chrysler Town & Country?

The Intake Manifold Temperature sensor is on the air intake duct. To remove the sensor, begin by disconnecting the cable from the negative terminal of the battery and then disconnecting the electrical connector from the sensor. Pull the sensor out of the air intake duct and inspect the condition of the mounting hole. If necessary, replace the air intake duct. To reinstall, switch the removal steps going from the last step to the first step.

Genuine Chrysler Town & Country Intake Manifold Temperature Sensor

Air Intake Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Intake Manifold Temperature Sensors found

View related parts
Chrysler Town & Country Sensor-Air Temperature
Part Number: 5149182AB
$28.79 MSRP: $42.40
You Save: $13.61 (33%)
ADD TO CART
Product Specifications
- Other Name: Sensor Air Temperature
- Replaces: 5149182AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2016 Chrysler Town & Country | Gold, Limited, Limited Platinum, LX, S, Touring, Touring L, Touring-L | 6 Cyl 3.6L
View related parts
Chrysler Town & Country Sensor-Air Temperature
Part Number: 56028364AA
$27.46 MSRP: $40.75
You Save: $13.29 (33%)
ADD TO CART
Product Specifications
- Other Name: Sensor Air Temperature
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Chrysler Town & Country | LX, Touring | 6 Cyl 3.3L, 6 Cyl 3.8L
View related parts
Chrysler Town & Country Sensor-Air Temperature
Part Number: 56027872
$38.12 MSRP: $56.05
You Save: $17.93 (32%)
ADD TO CART
Product Specifications
- Other Name: Sensor Air Temperature
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2000 Chrysler Town & Country | LX FWD, LXi FWD, SX
View related parts
Chrysler Town & Country Sensor-Charge Air Temp
Part Number: 4606487AB
$63.83 MSRP: $96.10
You Save: $32.27 (34%)
ADD TO CART
Product Specifications
- Other Name: Sensor Charge Air Temp
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2010 Chrysler Town & Country | Base, EL, EX, Limited, Limited AWD, Limited FWD, LX, LX AWD, LX FWD, LXi AWD, LXi FWD, Touring, Touring AWD, Touring FWD, Touring Plus | 6 Cyl 3.3L, 6 Cyl 3.8L, 6 Cyl 4.0L
View related parts
Chrysler Town & Country Sensor-Air Temperature
Part Number: 68031593AA
$204.59 MSRP: $310.00
You Save: $105.41 (34%)
ADD TO CART
Product Specifications
- Other Name: Sensor Air Temperature; Air Intake Temperature Sensor, Temperature Sensor
- Replaces: 5140331AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2011 Chrysler Town & Country | Limited, LX, Touring, Touring Plus
View related parts
Chrysler Town & Country Sensor Air Temperature
Part Number: 33004280
Product Specifications
- Other Name: Temperature (Charge Temp.) 6-8 Cyl.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996 Chrysler Town & Country | LX Long Wheelbase AWD, LX Long Wheelbase FWD, LX Short Wheelbase FWD, LXi AWD, LXi FWD | 6 Cyl 3.3L, 6 Cyl 3.8L

Chrysler Town & Country Intake Manifold Temperature Sensor

Intake Manifold Temperature Sensor is known to control the flow of the air in Chrysler Town & Country so that the combustion to be good and the performance of the vehicle to be optimal. This information is transmitted to the Powertrain Control Module (PCM) that in turns changes the fuel injector timing to ensure that the engine has correct air to fuel ratio under different working conditions. Various species of Intake Manifold Temperature Sensors might have been fitted on the various models of the Town & Country, including some that are part of the Mass Air Flow (MAF) sensor system. The basic difference between these sensors is in respect to their tuning and applicability to definite airflow rates and fuel injectors. A faulty Intake Air Temperature Sensor will lead to stalling or wrong air/fuel ratio and requires brilliant analysis of the air intake system for possible leaks or problems with the sensor.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler Town & Country Intake Manifold Temperature Sensor at great affordable prices. Moreover, all genuine Chrysler Town & Country Intake Manifold Temperature Sensor come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Chrysler Town & Country Intake Manifold Temperature Sensor Parts Questions & Experts Answers

Sensor-Charge Air Temp
4606487AB
Q: Where is the IAT Sensor Located on Chrysler Town & Country?
A: The Intake Manifold Temperature sensor is on the air intake duct. To remove the sensor, begin by disconnecting the cable from the negative terminal of the battery and then disconnecting the electrical connector from the sensor. Pull the sensor out of the air intake duct and inspect the condition of the mounting hole. If necessary, replace the air intake duct. To reinstall, switch the removal steps going from the last step to the first step.