×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Dodge Avenger EGR Valve
Emissions EGR Valve- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
11 EGR Valves found
Dodge Avenger EGR Valve
The EGR Valve in Dodge Avenger vehicles assists in regulating the circulation of exhaust gases back into the combustion chamber thus helping in emission control particularly nitrogen oxide (NOx). Through reintroducing part of the exhaust gas back into the intake stream, the EGR Valve also cuts the oxygen content and puts into the combustion chamber inert gases that will help to mop up heat generated by the combustion process and prevent formation of NOx caused by high temperature. This mechanism works also to serve in regulation of emissions as well as the engine performance by allowing for larger throttle positions and reduction of pumping loss. In the course of time, EGR technology in the Avenger has been refined from the use of simple orifice jets to a sophisticated valve to perform the task that responds to specific conditions that include coolant temperature and manifold vacuum. Some of the advanced may even incorporate backpressure transducers to encourage flow or other EGR parameters to depend with the load of an engine. However, the EGR valves have been known to get blocked by carbon deposits and may therefore need servicing.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Avenger EGR Valve at great affordable prices. Moreover, all genuine Dodge Avenger EGR Valve come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Dodge Avenger EGR Valve Parts Questions & Experts Answers
- Q: How to Remove the EGR Valve and EGR Tube on Dodge Avenger?A: The EGR valve is bolted to the rear end of the rear-bank cylinder head. Remove the EVAP purge solenoid valve and disconnect the electrical connector. Next, remove the lower EGR tube nut from the exhaust manifold and the lower EGR tube bolts from the EGR valve. For the upper EGR tube, remove the two bolts securing the lower end of the pipe to the EGR valve and disconnect the upper end from the intake manifold. Remove the old gasket between the upper pipe and the EGR valve, as well as the old rubber silicone seals from the EGR pipe.
