×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Dodge Avenger Fuel Tank
Gas Tank- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
11 Fuel Tanks found
Dodge Avenger Fuel Tank
Fuel Tank of automobiles like Dodge Avenger plays an important role in storing and accessing fuel in its engine. In its construction, it is intended to effectively contain liquid fuel and vapors and has provisions for fuel filler pipe, the venting system and passageway to the engine. The Dodge Avenger's Fuel Tank is made of metal or plastic where the metal type is stamped or welded steel or aluminum while the plastic style is created using High Density Polyethylene (HDPE). For the past years, the Dodge Avenger has incorporated these two major forms of Fuel Tanks, which have special features. Another disadvantage of metal tanks is corrosion and rust issues which may result in leakage of the stored substance and on the other hand, plastic tanks may crack when exposed to very high of low temperatures or vibration. Both are made with a material that adapts to the severe conditions in the undercarriage of the vehicle. They are also part of the ev connection as well as the evaporative emission control system(EVAP) to prevent fuel vapors from evaporating in the atmosphere.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Avenger Fuel Tank at great affordable prices. Moreover, all genuine Dodge Avenger Fuel Tank come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Dodge Avenger Fuel Tank Parts Questions & Experts Answers
- Q: How to Remove and Install a Fuel Tank on Dodge Avenger?A: The following procedure is much easier to perform if the fuel tank is empty. If the fuel tank isn't empty or nearly empty, you can siphon fuel from the tank with a siphon kit, available at most auto parts stores. NEVER start the siphoning action with your mouth! Relieve the fuel system pressure. Disconnect the negative battery cable from the remote ground terminal or battery. Raise the rear of the vehicle and support it securely on jackstands. If you're working on an AWD model, remove the driveshaft and the rear differential electronically controlled clutch. Loosen the hose clamp and disconnect the fuel filler hose from the fuel tank. Unplug the electrical connector in the fuel pump module harness. Disconnect the fuel line and EVAP line quick-connect fittings, both of which are located at the front of the fuel tank. Remove the close-out panels at each side of the fuel tank. On convertible models, remove the two front bolts from the cross braces and move the braces out from under that fuel tank. Remove the exhaust pipe from below the fuel tank. Support the fuel tank with a transmission jack or with a floor jack. If you're using a floor jack, put a piece of plywood between the jack head and the tank to protect the tank. Remove the fuel tank support strap bolts and carefully lower the fuel tank from the vehicle, making sure no hoses or wiring harness are still attached. Installation is the reverse of removal. Tighten the fuel tank strap bolts securely. Start the engine and check for leaks at any fuel line connectors that were disconnected.
