Where is the Knock Sensor Located on Dodge Avenger?

On 2.4L engines, remove the intake manifold (2014 and earlier) or the exhaust manifold (2015 and later). Disconnect the electrical connector(s) from the knock sensor(s). Remove the mounting bolt(s) and detach the sensor(s). Installation is the reverse of removal. Tighten the knock sensor to the specified torque.

Genuine Dodge Avenger Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Knock Sensors found

View related parts
Dodge Avenger Sensor-Knock
Part Number: 68166540AA
$78.96 MSRP: $121.00
You Save: $42.04 (35%)
ADD TO CART
Product Specifications
- Other Name: Sensor Knock; Knock Sensor
- Replaces: 68166540AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2013-2014 Dodge Avenger | R/T FWD, SE, SXT | 6 Cyl 3.6L
View related parts
Dodge Avenger Sensor-Knock
Part Number: 5149188AA
$56.68 MSRP: $77.35
You Save: $20.67 (27%)
ADD TO CART
Product Specifications
- Other Name: Sensor Knock; Knock Sensor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2012 Dodge Avenger | Express, LUX, Mainstreet, R/T FWD, SE, SXT, SXT Plus | 6 Cyl 3.6L
View related parts
Dodge Avenger Sensor-Knock
Part Number: 5033316AB
$124.34 MSRP: $187.00
You Save: $62.66 (34%)
ADD TO CART
Product Specifications
- Other Name: Sensor Knock; Knock Sensor, Map Sensor
- Replaces: 5033316AA, 56028563AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2014 Dodge Avenger | Express, Heat, LUX, Mainstreet, R/T FWD, SE, SXT | 4 Cyl 2.4L
View related parts
Dodge Avenger Sensor-Knock
Part Number: 5033316AA
$123.21 MSRP: $187.00
You Save: $63.79 (35%)
ADD TO CART
Product Specifications
- Other Name: Sensor Knock
- Replaced by: 5033316AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2012 Dodge Avenger | Express, Heat, LUX, Mainstreet, R/T FWD, SE, SXT | 4 Cyl 2.4L
View related parts
Dodge Avenger Sensor-DETONATION
Part Number: 4606093AD
$146.46 MSRP: $222.00
You Save: $75.54 (35%)
ADD TO CART
Product Specifications
- Other Name: Sensor Detonation; Knock Sensor, Sensor
- Replaces: 4606093
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Dodge Avenger | Express, Heat, R/T AWD, R/T FWD, SE, SXT | 6 Cyl 2.7L, 6 Cyl 3.5L
View related parts
Dodge Avenger Sensor-DETONATION
Part Number: 4606093
$146.46 MSRP: $222.00
You Save: $75.54 (35%)
ADD TO CART
Product Specifications
- Other Name: Sensor Detonation
- Replaced by: 4606093AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Dodge Avenger | R/T AWD, R/T FWD, SE, SXT | 6 Cyl 3.5L
View related parts
Dodge Avenger Sensor-Knock
Part Number: 4557667
Product Specifications
- Other Name: Sensor Knock; Knock Sensor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1998 Dodge Avenger | Base, ES | 4 Cyl 2.0L, 6 Cyl 2.5L
View related parts
Dodge Avenger Sensor-Knock
Part Number: 68001451AA
Product Specifications
- Other Name: Sensor Knock
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Dodge Avenger | SE, SXT

Dodge Avenger Knock Sensor

Knock Sensor in Dodge Avenger car model is a significant part of the vehicle that helps in detecting the knock of the engine and passing signals to PCM for proper adjustment of timing. Usually piezoelectric, the sensor measures the knock depending on the pressure changes detected and sends an electrical signal to the ECU. This means that precise timing changes to maximise power and to avoid detrimental effects on the engine regardless of the octane rating of the fuel. Sophisticated packages may change mapping of certain cylinder and control boost pressure, it is possible to get the most out of engine and also increase its durability under various conditions. The Knock Sensor in Dodge Avenger cars helps in efficient working of the engine as well as to avoid problems regarding knocking.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Avenger Knock Sensor at great affordable prices. Moreover, all genuine Dodge Avenger Knock Sensor come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Avenger Knock Sensor Parts Questions & Experts Answers

Sensor-DETONATION
4606093AD
Q: Where is the Knock Sensor Located on Dodge Avenger?
A: On 2.4L engines, remove the intake manifold (2014 and earlier) or the exhaust manifold (2015 and later). Disconnect the electrical connector(s) from the knock sensor(s). Remove the mounting bolt(s) and detach the sensor(s). Installation is the reverse of removal. Tighten the knock sensor to the specified torque.

Related Dodge Avenger Parts

Browse by Year

2014 Knock Sensor 2013 Knock Sensor 2012 Knock Sensor 2011 Knock Sensor 2010 Knock Sensor 2009 Knock Sensor 2008 Knock Sensor 2007 Knock Sensor 1998 Knock Sensor 1997 Knock Sensor 1996 Knock Sensor 1995 Knock Sensor