How to Remove the Camshaft Position Sensor on Dodge Avenger?

Disconnect the negative battery cable. Remove the air filter housing and upper intake manifold (bank 2). Disconnect the electrical connector. Unscrew the sensor mounting bolt and pull the sensor. Check the O-ring and apply oil if OK. Insert the sensor and install the mounting bolt. Reverse for installation.

Genuine Dodge Avenger Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Camshaft Position Sensors found

View related parts
Dodge Avenger Sensor-CAMSHAFT
Part Number: 5149141AF
$49.67 MSRP: $74.10
You Save: $24.43 (33%)
ADD TO CART
Product Specifications
- Other Name: Sensor Camshaft; Camshaft Position Sensor, Camshaft Sensor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Dodge Avenger | Express, LUX, Mainstreet, R/T FWD, SE, SXT, SXT Plus | 6 Cyl 3.6L
View related parts
Dodge Avenger Sensor-CAMSHAFT
Part Number: 5033308AB
$46.87 MSRP: $70.10
You Save: $23.23 (34%)
ADD TO CART
Product Specifications
- Other Name: Sensor Camshaft
- Replaced by: 68080819AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2013 Dodge Avenger | Express, Heat, LUX, Mainstreet, R/T FWD, SE, SXT | 4 Cyl 2.4L
View related parts
Dodge Avenger Sensor-CAMSHAFT
Part Number: 68080819AB
$46.87 MSRP: $70.10
You Save: $23.23 (34%)
ADD TO CART
Product Specifications
- Other Name: Sensor Camshaft
- Replaced by: 68080819AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014 Dodge Avenger | SE, SXT | 4 Cyl 2.4L
View related parts
Dodge Avenger Sensor-CAMSHAFT
Part Number: 4609089AH
$109.60
ADD TO CART
Product Specifications
- Other Name: Sensor Camshaft
- Replaced by: 68407872AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Dodge Avenger | Express, Heat, R/T FWD, SE, SXT | 6 Cyl 2.7L
View related parts
Dodge Avenger Sensor
Part Number: 5029808AD
Product Specifications
- Other Name: Sensor Camshaft
- Replaces: 68013184AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Avenger | Express, Heat, R/T AWD, R/T FWD, SE, SXT | 6 Cyl 3.5L
View related parts
Dodge Avenger Sender-CAMSHAFT
Part Number: 68001591AA
Product Specifications
- Other Name: Sensor Camshaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Dodge Avenger | Express, Heat, R/T FWD, SE, SXT

Dodge Avenger Camshaft Position Sensor

The Camshaft Position Sensor is one of the important parts in Dodge Avenger cars that keep trace on the position and speed of the camshaft and passes these details to the engine control module to control the fuel injectors and ignition occurrence. Usually it is installed above the camshaft; however, its location may be different depending on the model of a car. While working together with the crank sensor, the Camshaft Position Sensor is relevant for the synchronization of certain engine elements, which makes it a significant part of the engine. An unhappy sensor means unhappy engine, which is why proper check-ups and diagnoses are so crucial.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Avenger Camshaft Position Sensor at great affordable prices. Moreover, all genuine Dodge Avenger Camshaft Position Sensor come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Avenger Camshaft Position Sensor Parts Questions & Experts Answers

Sensor
5029808AD
Q: How to Remove the Camshaft Position Sensor on Dodge Avenger?
A: Disconnect the negative battery cable. Remove the air filter housing and upper intake manifold (bank 2). Disconnect the electrical connector. Unscrew the sensor mounting bolt and pull the sensor. Check the O-ring and apply oil if OK. Insert the sensor and install the mounting bolt. Reverse for installation.