Where is the MAP Sensor Located on Dodge Avenger?

The MAP sensor is on the upper intake manifold. To remove it on 3.6L engines, begin by pulling off the engine cover. Then, disconnect the electrical connector from the sensor. On 2.4L engines, remove the screw and pull the sensor out. Make sure to inspect the O-ring for any damage and replace it if necessary. Installation is the reverse of removal.

Genuine Dodge Avenger MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 MAP Sensors found

View related parts
Dodge Avenger Sensor-Map
Part Number: 5149174AB
$37.52 MSRP: $56.05
You Save: $18.53 (34%)
ADD TO CART
Product Specifications
- Other Name: Sensor Map
- Replaced by: 68371847AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Dodge Avenger | Express, LUX, Mainstreet, R/T FWD, SE, SXT, SXT Plus | 6 Cyl 3.6L
View related parts
Dodge Avenger Sensor-Map
Part Number: 5033310AB
$65.60 MSRP: $98.60
You Save: $33.00 (34%)
ADD TO CART
Product Specifications
- Other Name: Sensor Map; M.A.P. Sensor, Map Sensor
- Replaces: 5149092AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2014 Dodge Avenger | Express, Heat, LUX, Mainstreet, R/T FWD, SE, SXT | 4 Cyl 2.4L
View related parts
Dodge Avenger Sensor-Map
Part Number: 5033310AC
$40.54 MSRP: $60.60
You Save: $20.06 (34%)
ADD TO CART
Product Specifications
- Other Name: Sensor Map
- Replaced by: 68199324AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Dodge Avenger | Express, Heat, R/T AWD, R/T FWD, SE, SXT | 6 Cyl 2.7L, 6 Cyl 3.5L
View related parts
Dodge Avenger Sensor-Map
Part Number: 56028562AB
$31.70 MSRP: $45.80
You Save: $14.10 (31%)
ADD TO CART
Product Specifications
- Other Name: Sensor Map; M.A.P. Sensor, Map Sensor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Dodge Avenger | SE, SXT | 6 Cyl 2.7L
View related parts
Dodge Avenger Sensor-Pressure And Temperature
Part Number: 5149001AA
Product Specifications
- Other Name: Sensor Fuel Temperature
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Dodge Avenger | Express, Heat, R/T FWD, SE, SXT
View related parts
Dodge Avenger Sensor-Map
Part Number: 5269983
Product Specifications
- Other Name: Sensor Map; M.A.P. Sensor, Map Sensor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2000 Dodge Avenger | Base, ES | 4 Cyl 2.0L, 6 Cyl 2.5L

Dodge Avenger MAP Sensor

MAP Sensor in Dodge Avenger automobiles is one of the significant parts that monitors the amount of positive air pressure that is getting into the intake manifold and conveys info to the engine control unit or (ECU) in the adjustment of fuel injectors. This sensor is crucial for determining the density of the air and infusion of the air and fuel ratio for combustion especially in case of; the speed density method. A MAP sensor or a mass airflow (MAF) sensor is found in naturally aspirated engines; at the same time, forced induction engines incorporate both. MAP sensor is also useful for the diagnostics test especially the OBD II because it is useful in testing the EGR valve of the car. Unlike boost sensors, MAP sensors offer readings of absolute pressure and are used in the precise measurements that fuel metering and ignition timing of the engine depends on.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Avenger MAP Sensor at great affordable prices. Moreover, all genuine Dodge Avenger MAP Sensor come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Avenger MAP Sensor Parts Questions & Experts Answers

Sensor-Map
5149174AB
Q: Where is the MAP Sensor Located on Dodge Avenger?
A: The MAP sensor is on the upper intake manifold. To remove it on 3.6L engines, begin by pulling off the engine cover. Then, disconnect the electrical connector from the sensor. On 2.4L engines, remove the screw and pull the sensor out. Make sure to inspect the O-ring for any damage and replace it if necessary. Installation is the reverse of removal.