×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Dodge Avenger Parking Brake Shoe
Emergency Parking Brake Shoe- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
6 Parking Brake Shoes found
Dodge Avenger Parking Brake Shoe
In cars, particularly the Dodge Avenger automobiles, the Parking Brake Shoe is very essential in making the wheel stationary whenever it is parked. Its primary duty is to generate friction through the interaction between the brake lining and the drum wall, so as to secure the wheels immovable when the parking brake is applied. E169: The Dodge Avenger models apply this mechanism to guarantee stability and safety when parked or still. The overview does not distinguish various types or styles of Parking Brake Shoe used in different models of Avenger but regardless of this, its primary function remains the same and that is to stop the wheel movement.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Avenger Parking Brake Shoe at great affordable prices. Moreover, all genuine Dodge Avenger Parking Brake Shoe come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Dodge Avenger Parking Brake Shoe Parts Questions & Experts Answers
- Q: How to Replace the Parking Brake Shoes on Dodge Avenger?A: Loosen the rear wheel lug nuts, raise the rear end of the vehicle and support it securely on jackstands. Block the front wheels to keep the vehicle from rolling. Release the parking brake and remove the rear wheels. Remove the Brake Caliper and Brake Disc. Once the disc is removed, clean the parking brake assembly with brake system cleaner. Using locking pliers, unhook and remove the springs. Remove the adjuster assembly and strut from between the brake shoes. Grasp one of the shoe hold-down cups with pliers and push it toward the brake backing plate to compress the hold-down spring. Twist the cup 1/4-turn to align the slot in the hold-down pin with the cup, then release the spring pressure and take off the cup and spring. Repeat this with the cup and spring on the other parking brake shoe. Take the shoes off the backing plate. Disengage the parking brake lever from the cable. Check all parts for wear and damage, paying special attention to metal-to-metal contact points. Replace worn or damaged parts. Check the parking brake drum surface inside the brake disc for score marks, cracks, deep scratches, and hard spots. Apply a small amount of high-temperature brake grease to the friction points of the backing plate and adjuster screw assembly. Reverse the removal steps to install the brake shoes. The shoe-to-anchor spring with the paint mark is installed with the paint mark toward the rear of the vehicle. Expand the shoes, using the automatic adjuster, until the drum will just fit over them. Install the brake disc and caliper. Adjust the parking brake. Install the wheel and lug nuts. Lower the vehicle and tighten the lug nuts to the torque. Check the operation of the parking brake.
