How to Replace a Rear Wheel Cylinder on Dodge Avenger?

If replacement is warranted, explore all options before beginning the job. New wheel cylinders are available, which makes this job quite easy. Never replace only one wheel cylinder. Always replace both of them at the same time. Remove the rear brake shoes. Using a flare-nut wrench, disconnect the brake line fitting from the wheel cylinder. Plug the end of the brake line to prevent fluid loss and contamination. Remove the two bolts securing the wheel cylinder to the backing plate and remove the wheel cylinder. Installation is the reverse of removal. Tighten the wheel cylinder mounting bolts to the torque. Tighten the line fitting securely. Install the brake shoes and brake drum. Bleed the brakes. Carefully test brake operation before resuming normal operation.

Genuine Dodge Avenger Wheel Cylinder

Brake Wheel Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wheel Cylinders found

View related parts
Dodge Avenger Cylinder-Brake Wheel Cylinder
Part Number: MB134975
$7.07 MSRP: $11.54
You Save: $4.47 (39%)
ADD TO CART
Product Specifications
- Other Name: Cup And Boot Package Brake Wheel Cylinder; Wheel Cylinder Overhaul Kit
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1999 Dodge Avenger | Base, ES | 4 Cyl 2.0L, 6 Cyl 2.5L
View related parts
Dodge Avenger Cylinder-Wheel
Part Number: 5191305AA
$68.74 MSRP: $104.00
You Save: $35.26 (34%)
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly Wheel; Wheel Cylinder
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Avenger | R/T AWD, R/T FWD, SE, SXT | 4 Cyl 2.4L, 6 Cyl 2.7L, 6 Cyl 3.5L
View related parts
Dodge Avenger Wheel Cylinder-Wheel
Part Number: MR128624
Product Specifications
- Other Name: Cylinder Wheel
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1999 Dodge Avenger | Base, ES | 4 Cyl 2.0L, 6 Cyl 2.5L

Dodge Avenger Wheel Cylinder

The Wheel Cylinder in Dodge Avenger automobiles is part of the hydraulic drum brake system whose function is to push the brake shoes against the brake drum so as to enable halting of the automobile. It works on the principle of hydraulic mechanism in which the pressure builds up the pistons inside the cylinder to push the brake shoes against the drum. The Wheel Cylinder generally includes a central cylinder, two pistons having rubber sealing rings and an expander spring to hold the position of the said sealing rings. old Dodge avenger models used cast iron and aluminum Wheel Cylinders, find the current models aluminum Wheel Cylinders are preferred to avoid rust. Some designs include the use of two single piston arrangements although the general functions stays the same. It requires the normal inspection and the maintenance since any form of leakage might limit the braking power and then the Wheel Cylinder has to be rebuilt or replaced so that the car can be safely used.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Avenger Wheel Cylinder at great affordable prices. Moreover, all genuine Dodge Avenger Wheel Cylinder come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Avenger Wheel Cylinder Parts Questions & Experts Answers

Cylinder-Wheel
5191305AA
Q: How to Replace a Rear Wheel Cylinder on Dodge Avenger?
A: If replacement is warranted, explore all options before beginning the job. New wheel cylinders are available, which makes this job quite easy. Never replace only one wheel cylinder. Always replace both of them at the same time. Remove the rear brake shoes. Using a flare-nut wrench, disconnect the brake line fitting from the wheel cylinder. Plug the end of the brake line to prevent fluid loss and contamination. Remove the two bolts securing the wheel cylinder to the backing plate and remove the wheel cylinder. Installation is the reverse of removal. Tighten the wheel cylinder mounting bolts to the torque. Tighten the line fitting securely. Install the brake shoes and brake drum. Bleed the brakes. Carefully test brake operation before resuming normal operation.