How to replace rear Crankshaft Seal on Dodge Caravan?

The rear Crankshaft Seal is pressed into a bore machined into the rear main bearing cap and engine block. Begin by removing the driveplate, ensuring that the Crankshaft Seal is installed flush with the outer surface of the block. Carefully pry out the old seal using a flat blade screwdriver, taking care not to nick or scratch the sealing surfaces on the crankshaft or seal bore to prevent an oil leak. Thoroughly clean the crankshaft and seal bore in the block, de-greasing them with a rag soaked in lacquer thinner or acetone, and do not lubricate the lip or outer diameter of the new seal; it must be installed dry as it comes from the manufacturer. Position the new seal on the crankshaft with the words "THIS SIDE OUT" facing outward, and use an appropriate size driver and pilot tool to drive the seal into the cylinder block until it is flush with the outer surface. Ensure the seal is not driven in past flush to avoid an oil leak. Finally, installation of the remaining components follows the reverse order of removal.

Genuine Dodge Caravan Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Crankshaft Seals found

View related parts
Dodge Caravan RETAINER-CRANKSHAFT Rear Oil
Part Number: 68031388AA
$99.30 MSRP: $151.00
You Save: $51.70 (35%)
ADD TO CART
Product Specifications
- Other Name: RETAINER And Seal Crankshaft Rear Oil; Rear Main Seal Retainer
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Dodge Caravan | C/V, SE, SXT | 6 Cyl 3.3L
View related parts
Dodge Caravan Seal-Rear Main CRANKSHAFT
Part Number: 4621939AB
$24.23 MSRP: $35.75
You Save: $11.52 (33%)
ADD TO CART
Product Specifications
- Other Name: Seal Rear Main Crankshaft; Rear Main Seal, Rear Seal
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2007 Dodge Caravan | C/V, EC, SE, Sport, SXT | 4 Cyl 2.4L, 6 Cyl 3.3L
View related parts
Dodge Caravan Seal-Front Main CRANKSHAFT
Part Number: 4667198
$19.35 MSRP: $22.95
You Save: $3.60 (16%)
ADD TO CART
Product Specifications
- Other Name: Seal Front Main Crankshaft; Front Cover Seal, Front Crank Seal, Front Seal
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2007 Dodge Caravan | Base, C/V, EC, LE, SE | 4 Cyl 2.4L
View related parts
Dodge Caravan Seal-CRANKSHAFT Oil
Part Number: 4273275
$22.32 MSRP: $33.15
You Save: $10.83 (33%)
ADD TO CART
Product Specifications
- Other Name: Seal, Crankshaft Front Oil
- Replaced by: 4792317AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1986-2007 Dodge Caravan | Base, C/V, C/V (Long Wheel Base VAN) AWD, C/V (Long Wheel Base VAN) FWD, C/V (Short Wheel Base VAN) AWD, C/V (Short Wheel Base VAN) FWD, LE, LE AWD, LE FWD, SE, SE AWD, SE FWD, Sport, SXT | 4 Cyl 2.5L, 6 Cyl 3.3L, 6 Cyl 3.8L
View related parts
Dodge Caravan RETAINER-CRANKSHAFT Rear Oil Seal
Part Number: 4654389AB
$26.59 MSRP: $30.65
You Save: $4.06 (14%)
ADD TO CART
Product Specifications
- Other Name: RETAINER Crankshaft Rear Oil Seal; Rear Main Seal, Rear Main Seal Retainer
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2007 Dodge Caravan | C/V, SE, Sport, SXT | 6 Cyl 3.3L
View related parts
Dodge Caravan Seal-CRANKSHAFT Oil
Part Number: MD168055
Product Specifications
- Other Name: Oil Seal, Crankshaft Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-2000 Dodge Caravan | Base, C/V (Short Wheel Base VAN) FWD, LE, LE FWD, SE, SE FWD | 6 Cyl 3.0L
View related parts
Dodge Caravan RETAINER-CRANKSHAFT Rear Oil Seal
Part Number: 4654389AC
$32.92 MSRP: $47.65
You Save: $14.73 (31%)
Product Specifications
- Other Name: RETAINER Crankshaft Rear Oil Seal; Rear Main Seal Retainer
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Dodge Caravan | C/V, SE, SXT | 6 Cyl 3.3L

Dodge Caravan Crankshaft Seal

The Crankshaft Seal of Dodge Caravan automobile is situated at the front part of the engine and its function is to minimize the leakage of oil in the crankcase. Primarily made of metal and rubber, this round seal serve a very important purpose in ensuring that engine gets lubricated in order to minimize on friction between the engine parts. In Dodge Caravan models, there are many types of Crankshaft Seals have been fitted over the years with modifications made mostly in material and construction to improve on durability and performance. A damaged Crankshaft Seal could result in Oil leak and therefore requires replacement in a high mileage cars to enable the automobile engine run effectively. It was observed from the above discussion that, the maintenance of the Crankshaft Seal is vital for the longevity of the Dodge Caravan.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Caravan Crankshaft Seal at great affordable prices. Moreover, all genuine Dodge Caravan Crankshaft Seal come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Caravan Crankshaft Seal Parts Questions & Experts Answers

Seal-CRANKSHAFT Oil
4273275
Q: How to replace rear Crankshaft Seal on Dodge Caravan?
A: The rear Crankshaft Seal is pressed into a bore machined into the rear main bearing cap and engine block. Begin by removing the driveplate, ensuring that the Crankshaft Seal is installed flush with the outer surface of the block. Carefully pry out the old seal using a flat blade screwdriver, taking care not to nick or scratch the sealing surfaces on the crankshaft or seal bore to prevent an oil leak. Thoroughly clean the crankshaft and seal bore in the block, de-greasing them with a rag soaked in lacquer thinner or acetone, and do not lubricate the lip or outer diameter of the new seal; it must be installed dry as it comes from the manufacturer. Position the new seal on the crankshaft with the words "THIS SIDE OUT" facing outward, and use an appropriate size driver and pilot tool to drive the seal into the cylinder block until it is flush with the outer surface. Ensure the seal is not driven in past flush to avoid an oil leak. Finally, installation of the remaining components follows the reverse order of removal.