×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Dodge Caravan Knock Sensor
Engine Knock Sensor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Knock Sensors found
Dodge Caravan Knock Sensor
The Knock Sensor used in Dodge Caravan automobiles is quite important in the operation of the engine since it is tasked with the responsibility of sensing when an engine knock is taking place due to wrong ignition timing. This device is used to pass signals to the powertrain control module (PCM) so that the PCM can enrich the mixture and alter the ignition timing so as to reduce extreme detonation. Usually, Knock Sensors in Dodge Caravan are piezoelectric devices which transform mechanical oscillations, particularly knocks, to electrical signals to provide pressure spikes. Throughout the years Dodge Caravan models have incorporated high end Knock Sensor systems that include abilities like ignition timing capabilities for cylinders and management of boost pressure according to engine design. These modifications allow the premier cylinder firing in an area near the knock limit while using lower octane fuels and increases performance without accompanying dangers. The story of the development of Knock Sensor technology in Dodge Caravan vehicles shows that efforts have been made to keep the motor operating effectively and durable in different road situations.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Caravan Knock Sensor at great affordable prices. Moreover, all genuine Dodge Caravan Knock Sensor come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Dodge Caravan Knock Sensor Parts Questions & Experts Answers
- Q: How to Remove and Replace a Knock Sensor on a Dodge Caravan?A: For 2.4L four-cylinder models, disconnect the battery's negative terminal cable. Disconnect the electrical connector from the knock sensor and unscrew it. To reinstall, tighten the knock sensor to the specified torque. For 3.3L/3.8L V6 models, disconnect the battery's negative terminal cable. Raise the front of the vehicle and secure it on jack stands. Remove the sensor mounting bolt and detach the sensor from the block.
