What are the steps and considerations for replacing shock absorbers and coil springs on Dodge Challenger?

These vehicle models are equipped with shock absorber/coil spring assemblies, allowing for individual replacement of shocks or springs, though disassembly by a qualified repair shop with proper equipment is necessary, which can significantly increase project costs. For SRT models, a unique front shock absorber system uses several accelerometers to monitor the shock, with the ADS "Active Damping System" adjusting the shocks based on road conditions and vehicle angle through the ADCM "Active Damping Control Module." The ADS shock absorber is serviced similarly to non-SRT models, except for disconnecting three wire electrical connections from the shock. To remove the shock absorber, first, take off the cap on the shock tower (if equipped) and remove the fasteners attaching the upper end of the shock to the frame. Next, loosen the front wheel lug nuts, raise the front of the vehicle, and support it securely on jackstands before removing the front wheels. Disconnect the stabilizer bar link from the shock assembly, then remove the fasteners attaching the lower end of the shock absorber to the lower control arm. Pull down on the lower control arm and remove the shock absorber toward the rear of the vehicle. Inspect the shock absorber for leaking fluid, dents, cracks, and other damage, as well as the coil spring for chips and cracks that could lead to premature failure, and check the spring seats for hardness and deterioration. If any components are worn or damaged, have the unit serviced or replaced by a qualified repair shop. For installation, raise the lower control arm with a floor jack to simulate normal ride height before tightening the lower shock absorber mounting fasteners, then install in reverse order of removal and ensure all mounting fasteners and wheel lug nuts are tightened to the specified torque.

Genuine Dodge Challenger Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

106 Shock Absorbers found

View related parts
Dodge Challenger Shock-Suspension
Part Number: 68072161AD
$238.70 MSRP: $364.00
You Save: $125.30 (35%)
ADD TO CART
Product Specifications
- Other Name: Shock ABSORBER Suspension Rear
- Replaced by: 68544270AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2014 Dodge Challenger | R/T, SE, SRT, SRT Core, SRT8, SRT8 Core | 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.4L
View related parts
Dodge Challenger Shock-Suspension
Part Number: 68079071AE
$164.69 MSRP: $246.00
You Save: $81.31 (34%)
ADD TO CART
Product Specifications
- Other Name: Shock ABSORBER Suspension Front
- Replaced by: 68544307AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2020 Dodge Challenger | GT AWD, GT RWD, R/T 392 RWD, R/T RWD, R/T Scat Pack RWD, SRT 392 RWD, SRT Demon RWD, SRT Hellcat RWD, SXT AWD, SXT RWD | 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.2L, 8 Cyl 6.4L
View related parts
Dodge Challenger Shock-Suspension
Part Number: 68079071AF
$164.69 MSRP: $246.00
You Save: $81.31 (34%)
ADD TO CART
Product Specifications
- Replaced by: 68544307AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2020 Dodge Challenger | GT RWD, R/T RWD, R/T Scat Pack RWD, SRT Hellcat RWD, SXT RWD | 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.2L, 8 Cyl 6.4L
View related parts
Dodge Challenger Shock-Suspension
Part Number: 5039356AF
$203.90 MSRP: $285.00
You Save: $81.10 (29%)
ADD TO CART
Product Specifications
- Other Name: Shock ABSORBER Suspension Rear
- Replaced by: 5039356AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2015 Dodge Challenger | R/T, R/T Scat Pack, SE, SRT, SRT 392, SRT Core, SRT Hellcat, SRT8, SRT8 Core, SXT, SXT Plus | 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.2L, 8 Cyl 6.4L
View related parts
Dodge Challenger Shock-Suspension
Part Number: 5039356AH
$203.90 MSRP: $285.00
You Save: $81.10 (29%)
ADD TO CART
Product Specifications
- Other Name: Shock Absorber
- Replaced by: 5039356AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2019-2020 Dodge Challenger | GT AWD, GT RWD, R/T RWD, R/T Scat Pack RWD, SRT Hellcat RWD, SXT AWD, SXT RWD | 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.2L, 8 Cyl 6.4L
View related parts
Dodge Challenger Shock-Suspension
Part Number: 5181576AI
$853.62 MSRP: $1175.00
You Save: $321.38 (28%)
ADD TO CART
Product Specifications
- Other Name: Shock, Shock Absorber
- Position: Passenger Side
- Replaces: 5181576AE, 5181576AH, 5181576AD, 5181576AG, 5181576AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2013-2023 Dodge Challenger | GT AWD, GT RWD, R/T, R/T 392 RWD, R/T RWD, R/T Scat Pack, R/T Scat Pack RWD, SE, SRT, SRT 392, SRT 392 RWD, SRT Core, SRT Demon RWD, SRT Hellcat, SRT Hellcat RWD, SRT8, SRT8 Core, SXT, SXT AWD, SXT Plus, SXT RWD | 6 Cyl 3.6 L GAS, 6 Cyl 3.6L, 8 Cyl 5.7 L GAS, 8 Cyl 5.7L, 8 Cyl 6.2 L GAS, 8 Cyl 6.2L, 8 Cyl 6.4 L GAS, 8 Cyl 6.4L
View related parts
Dodge Challenger Shock-Suspension
Part Number: 5181350AH
$345.00 MSRP: $465.00
You Save: $120.00 (26%)
ADD TO CART
Product Specifications
- Other Name: Shock ABSORBER Suspension Front
- Replaced by: 68531056AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2013-2014 Dodge Challenger | R/T, SE, SRT, SRT Core, SRT8, SRT8 Core | 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.4L
View related parts
Dodge Challenger SHOCK-SUSPENSION
Part Number: 68531045AA
$235.23 MSRP: $352.00
You Save: $116.77 (34%)
ADD TO CART
Product Specifications
- Other Name: Shock Absorber, Strut
- Replaces: 5181349AH, 5181349AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2013-2023 Dodge Challenger | GT AWD, GT RWD, R/T, R/T 392 RWD, R/T RWD, R/T Scat Pack, R/T Scat Pack RWD, SE, SRT, SRT 392, SRT 392 RWD, SRT Core, SRT Demon RWD, SRT Hellcat, SRT Hellcat RWD, SRT8, SRT8 Core, SXT, SXT AWD, SXT Plus, SXT RWD | 6 Cyl 3.6 L GAS, 6 Cyl 3.6L, 8 Cyl 5.7 L GAS, 8 Cyl 5.7L, 8 Cyl 6.2 L GAS, 8 Cyl 6.2L, 8 Cyl 6.4 L GAS, 8 Cyl 6.4L
View related parts
Dodge Challenger Suspension
Part Number: 68544307AA
$163.54 MSRP: $246.00
You Save: $82.46 (34%)
ADD TO CART
Product Specifications
- Other Name: Shock Absorber, Strut
- Position: Driver Side
- Replaces: 68079071AA, 68079071AB, 68079071AE, 68079071AF, 68079071AD, 5180772AC, 5180773AC, 68079071AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2023 Dodge Challenger | GT AWD, GT RWD, R/T, R/T 392 RWD, R/T RWD, R/T Scat Pack, R/T Scat Pack RWD, SE, SRT, SRT 392, SRT 392 RWD, SRT Core, SRT Demon RWD, SRT Hellcat, SRT Hellcat RWD, SRT8, SRT8 Core, SXT, SXT AWD, SXT Plus, SXT RWD | 6 Cyl 3.6 L GAS, 6 Cyl 3.6L, 8 Cyl 5.7 L GAS, 8 Cyl 5.7L, 8 Cyl 6.2 L GAS, 8 Cyl 6.2L, 8 Cyl 6.4 L GAS, 8 Cyl 6.4L
View related parts
Dodge Challenger Shock-Suspension
Part Number: 5039356AI
$189.30 MSRP: $285.00
You Save: $95.70 (34%)
ADD TO CART
Product Specifications
- Other Name: Shock, Shock Absorber
- Replaces: 5039356AF, 5039356AG, 5039356AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2023 Dodge Challenger | GT AWD, GT RWD, R/T, R/T 392 RWD, R/T RWD, R/T Scat Pack, R/T Scat Pack RWD, SE, SRT, SRT 392, SRT 392 RWD, SRT Core, SRT Demon RWD, SRT Hellcat, SRT Hellcat RWD, SRT8, SRT8 Core, SXT, SXT AWD, SXT Plus, SXT RWD | 6 Cyl 3.6 L GAS, 6 Cyl 3.6L, 8 Cyl 5.7 L GAS, 8 Cyl 5.7L, 8 Cyl 6.2 L GAS, 8 Cyl 6.2L, 8 Cyl 6.4 L GAS, 8 Cyl 6.4L
View related parts
Dodge Challenger SUSPENSION
Part Number: 68531062AB
$872.07 MSRP: $1200.00
You Save: $327.93 (28%)
ADD TO CART
Product Specifications
- Other Name: Shock Absorber, Strut
- Position: Driver Side
- Replaces: 5181555AG, 5181555AI, 68531062AA, 5181555AF, 5181555AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2021 Dodge Challenger | GT AWD, GT RWD, R/T, R/T 392 RWD, R/T RWD, R/T Scat Pack, R/T Scat Pack RWD, SE, SRT, SRT 392, SRT 392 RWD, SRT Core, SRT Demon RWD, SRT Hellcat, SRT Hellcat RWD, SRT8, SRT8 Core, SXT, SXT AWD, SXT Plus, SXT RWD | 6 Cyl 3.6 L GAS, 6 Cyl 3.6L, 8 Cyl 5.7 L GAS, 8 Cyl 5.7L, 8 Cyl 6.2 L GAS, 8 Cyl 6.2L, 8 Cyl 6.4 L GAS, 8 Cyl 6.4L
View related parts
Dodge Challenger Shock Abs-Suspension
Part Number: 68531425AA
$179.22 MSRP: $272.00
You Save: $92.78 (35%)
ADD TO CART
Product Specifications
- Other Name: Shock, Shock Absorber
- Replaces: 68310205AA, 68502663AB, 68072164AF, 68072164AE, 68502663AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2022 Dodge Challenger | GT AWD, SXT AWD | 6 Cyl 3.6 L GAS, 6 Cyl 3.6L, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger Shock-Suspension
Part Number: 68309864AA
$120.52 MSRP: $246.00
You Save: $125.48 (52%)
ADD TO CART
Product Specifications
- Other Name: Shock ABSORBER Suspension Front
- Replaced by: 68531424AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2020 Dodge Challenger | GT AWD, SXT AWD | 6 Cyl 3.6L
View related parts
Dodge Challenger Shock Abs-Suspension
Part Number: 68531424AA
$163.54 MSRP: $246.00
You Save: $82.46 (34%)
ADD TO CART
Product Specifications
- Other Name: Shock Absorber, Strut
- Replaces: 68502656AB, 68309864AA, 68502656AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2023 Dodge Challenger | GT AWD, SXT AWD | 6 Cyl 3.6 L GAS, 6 Cyl 3.6L, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger Suspension
Part Number: 68544272AA
$95.44 MSRP: $145.00
You Save: $49.56 (35%)
ADD TO CART
Product Specifications
- Other Name: Shock, Shock Absorber
- Replaces: 68072163AC, 68072163AB, 68072163AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2023 Dodge Challenger | GT AWD, GT RWD, R/T, R/T 392 RWD, R/T RWD, R/T Scat Pack, R/T Scat Pack RWD, SE, SRT, SRT 392, SRT 392 RWD, SRT Core, SRT Demon RWD, SRT Hellcat, SRT Hellcat RWD, SRT8, SRT8 Core, SXT, SXT AWD, SXT Plus, SXT RWD | 6 Cyl 3.6 L GAS, 6 Cyl 3.6L, 8 Cyl 5.7 L GAS, 8 Cyl 5.7L, 8 Cyl 6.2 L GAS, 8 Cyl 6.2L, 8 Cyl 6.4 L GAS, 8 Cyl 6.4L
View related parts
Dodge Challenger SHOCK-SUSPENSION
Part Number: 68531056AA
$345.00 MSRP: $465.00
You Save: $120.00 (26%)
ADD TO CART
Product Specifications
- Other Name: Shock Absorber, Strut
- Position: Driver Side
- Replaces: 5181350AI, 5181350AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2013-2023 Dodge Challenger | GT AWD, GT RWD, R/T, R/T 392 RWD, R/T RWD, R/T Scat Pack, R/T Scat Pack RWD, SE, SRT, SRT 392, SRT 392 RWD, SRT Core, SRT Demon RWD, SRT Hellcat, SRT Hellcat RWD, SRT8, SRT8 Core, SXT, SXT AWD, SXT Plus, SXT RWD | 6 Cyl 3.6 L GAS, 6 Cyl 3.6L, 8 Cyl 5.7 L GAS, 8 Cyl 5.7L, 8 Cyl 6.2 L GAS, 8 Cyl 6.2L, 8 Cyl 6.4 L GAS, 8 Cyl 6.4L
View related parts
Dodge Challenger Shock-Suspension
Part Number: 68079071AD
$111.25 MSRP: $246.00
You Save: $134.75 (55%)
ADD TO CART
Product Specifications
- Other Name: Shock ABSORBER Suspension Front
- Replaced by: 68544307AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2013-2016 Dodge Challenger | R/T, R/T Scat Pack, SE, SRT, SRT 392, SRT Core, SRT Hellcat, SRT8, SRT8 Core, SXT, SXT Plus | 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.2L, 8 Cyl 6.4L
View related parts
Dodge Challenger Shock-Suspension
Part Number: 68072161AB
$179.13 MSRP: $364.00
You Save: $184.87 (51%)
ADD TO CART
Product Specifications
- Other Name: Shock ABSORBER Suspension Rear
- Replaced by: 68544270AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011 Dodge Challenger | R/T, SE, SRT8 | 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.4L
View related parts
Dodge Challenger Shock-Suspension
Part Number: 68502663AB
$167.67 MSRP: $272.00
You Save: $104.33 (39%)
ADD TO CART
Product Specifications
- Replaced by: 68531425AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2020 Dodge Challenger | GT AWD, SXT AWD | 6 Cyl 3.6L
View related parts
Dodge Challenger Shock-Suspension
Part Number: 5181907AF
$864.69 MSRP: $1190.00
You Save: $325.31 (28%)
ADD TO CART
Product Specifications
- Other Name: Shock, Shock Absorber
- Position: Driver Side
- Replaces: 5181907AE, 5181907AC, 5181907AB, 5181907AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2023 Dodge Challenger | GT AWD, R/T, R/T 392 RWD, R/T RWD, R/T Scat Pack, SRT 392, SRT 392 RWD, SRT Demon RWD, SRT Hellcat, SRT Hellcat RWD, SXT, SXT Plus, SXT RWD | 6 Cyl 3.6 L GAS, 6 Cyl 3.6L, 8 Cyl 5.7 L GAS, 8 Cyl 5.7L, 8 Cyl 6.2 L GAS, 8 Cyl 6.2L, 8 Cyl 6.4 L GAS, 8 Cyl 6.4L

| Page 1 of 6 |Next >

1-20 of 106 Results

Dodge Challenger Shock Absorber

The Shock Absorber in Dodge Challenger plays a crucial role as the part of the suspension system, which has the ability of reducing any excessive bouncing, thus, providing better and improved ride quality to the users. Transforming kinetic energy to heat with help of hydraulic systems the Shock Absorber minimizes vibrations, enhancing the vehicle traversability on different types of roads. In the course of using carbon steel material to manufacture Dodge Challenger models, Shock Absorbers that have been applied include twin-tube and mono-tube types. Twin-tube shocks are also frequently used and are significantly simpler in construction and can be gas- charged for the purpose of increasing the durability. On the other hand, we have mono-tube shocks which provide high heat shedding capability and performance with multi-axial mounting. Extended features such as PSD and ASD extend the facial features of the automobile driving while technologies in electrorheological and magnetorheological dampers improve on sustainable and automated suspensions in the Dodge Challenger.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Challenger Shock Absorber at great affordable prices. Moreover, all genuine Dodge Challenger Shock Absorber come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Challenger Shock Absorber Parts Questions & Experts Answers

Shock-Suspension
68072163AC
Q: What are the steps and considerations for replacing shock absorbers and coil springs on Dodge Challenger?
A: These vehicle models are equipped with shock absorber/coil spring assemblies, allowing for individual replacement of shocks or springs, though disassembly by a qualified repair shop with proper equipment is necessary, which can significantly increase project costs. For SRT models, a unique front shock absorber system uses several accelerometers to monitor the shock, with the ADS "Active Damping System" adjusting the shocks based on road conditions and vehicle angle through the ADCM "Active Damping Control Module." The ADS shock absorber is serviced similarly to non-SRT models, except for disconnecting three wire electrical connections from the shock. To remove the shock absorber, first, take off the cap on the shock tower (if equipped) and remove the fasteners attaching the upper end of the shock to the frame. Next, loosen the front wheel lug nuts, raise the front of the vehicle, and support it securely on jackstands before removing the front wheels. Disconnect the stabilizer bar link from the shock assembly, then remove the fasteners attaching the lower end of the shock absorber to the lower Control Arm. Pull down on the lower control arm and remove the shock absorber toward the rear of the vehicle. Inspect the shock absorber for leaking fluid, dents, cracks, and other damage, as well as the coil spring for chips and cracks that could lead to premature failure, and check the spring seats for hardness and deterioration. If any components are worn or damaged, have the unit serviced or replaced by a qualified repair shop. For installation, raise the lower control arm with a floor jack to simulate normal ride height before tightening the lower shock absorber mounting fasteners, then install in reverse order of removal and ensure all mounting fasteners and wheel lug nuts are tightened to the specified torque.

Related Dodge Challenger Parts

Browse by Year

2023 Shock Absorber 2022 Shock Absorber 2021 Shock Absorber 2020 Shock Absorber 2019 Shock Absorber 2018 Shock Absorber 2017 Shock Absorber 2016 Shock Absorber 2015 Shock Absorber 2014 Shock Absorber 2013 Shock Absorber 2012 Shock Absorber 2011 Shock Absorber 2010 Shock Absorber 2009 Shock Absorber 2008 Shock Absorber