Where is the MAP Sensor Located on a Dodge Charger?

To remove the MAP sensor on a V6 engine, unlock and disconnect the electrical connector, then rotate the sensor counterclockwise 1/4-turn and pull it out. Inspect the 0-ring and replace if necessary. To install, reverse the removal steps. On a V8 engine, the MAP sensor is located near the firewall. Disconnect the electrical connector, rotate the sensor 1/4-turn counterclockwise and remove it. Inspect the 0-ring and replace if necessary. To install, place it in position, insert it into the mounting hole and turn it 1/4-turn clockwise. Reverse the removal steps to complete installation.

Genuine Dodge Charger MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

18 MAP Sensors found

View related parts
Dodge Charger Sensor-Map
Part Number: 56041018AD
$95.27 MSRP: $144.00
You Save: $48.73 (34%)
ADD TO CART
Product Specifications
- Other Name: Sensor Map; M.A.P. Sensor, Map Sensor
- Replaces: 56041018AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Dodge Charger | Base RWD, R/T AWD, R/T RWD, SRT8 RWD | 8 Cyl 6.1L
View related parts
Dodge Charger Sensor-Map
Part Number: 5149174AB
$37.52 MSRP: $56.05
You Save: $18.53 (34%)
ADD TO CART
Product Specifications
- Other Name: Sensor Map
- Replaced by: 68371847AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2019 Dodge Charger | GT AWD, GT RWD, Police RWD, SE AWD, SE RWD, SXT AWD, SXT Plus RWD, SXT RWD, V6 AWD | 6 Cyl 3.6L
View related parts
Dodge Charger Sensor-Map
Part Number: 56041018AC
$94.41 MSRP: $144.00
You Save: $49.59 (35%)
ADD TO CART
Product Specifications
- Other Name: Sensor Map
- Replaced by: 56041018AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Dodge Charger | Base RWD, SRT8 RWD | 8 Cyl 6.1L
View related parts
Dodge Charger Sensor-Map
Part Number: 68371847AA
$38.69 MSRP: $56.05
You Save: $17.36 (31%)
ADD TO CART
Product Specifications
- Other Name: Manifold Absolute Pressure Sensor, Map Sensor
- Replaced by: 68371847AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2020 Dodge Charger | GT AWD, GT RWD, Police RWD, SRT Hellcat Widebody RWD, SXT AWD, SXT RWD | 6 Cyl 3.6L
View related parts
Dodge Charger Sensor-Map
Part Number: 5033310AB
$65.60 MSRP: $98.60
You Save: $33.00 (34%)
ADD TO CART
Product Specifications
- Other Name: Sensor Map; M.A.P. Sensor, Map Sensor
- Replaces: 5149092AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2016 Dodge Charger | Police RWD, Scat Pack RWD, SRT 392 RWD, SRT RWD, SRT Superbee RWD, SRT8 RWD, SRT8 Superbee RWD | 8 Cyl 6.4L
View related parts
Dodge Charger Sensor-Map
Part Number: 68271094AA
$36.77 MSRP: $54.15
You Save: $17.38 (33%)
ADD TO CART
Product Specifications
- Other Name: Sensor Map
- Replaced by: 68271094AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2018 Dodge Charger | Police RWD, R/T 392 RWD, SRT 392 RWD | 8 Cyl 6.4L
View related parts
Dodge Charger Sensor-T/MAP
Part Number: 68207074AB
$67.85 MSRP: $101.00
You Save: $33.15 (33%)
ADD TO CART
Product Specifications
- Other Name: Sensor T/MAP; Map Sensor
- Replaces: 68207074AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2017 Dodge Charger | Police RWD, SRT Hellcat RWD | 8 Cyl 6.2L
View related parts
Dodge Charger Sensor-T/MAP
Part Number: 68207074AA
$66.77 MSRP: $101.00
You Save: $34.23 (34%)
ADD TO CART
Product Specifications
- Other Name: Sensor T/MAP
- Replaced by: 68207074AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2017 Dodge Charger | Police RWD, SRT Hellcat RWD | 8 Cyl 6.2L
View related parts
Dodge Charger Sensor-Map
Part Number: 5033310AC
$41.81 MSRP: $60.60
You Save: $18.79 (32%)
ADD TO CART
Product Specifications
- Other Name: Sensor Map
- Replaced by: 68199324AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2015 Dodge Charger | Base AWD, Base RWD, Police AWD, Police RWD, R/T AWD, R/T RWD, Rallye AWD, Rallye RWD, SXT AWD, SXT RWD | 6 Cyl 2.7L, 6 Cyl 3.5L, 8 Cyl 5.7L
View related parts
Dodge Charger Sensor-Map
Part Number: 5149091AA
$41.81 MSRP: $60.60
You Save: $18.79 (32%)
ADD TO CART
Product Specifications
- Other Name: Sensor Map
- Replaced by: 68199324AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006 Dodge Charger | Base RWD | 6 Cyl 2.7L, 6 Cyl 3.5L
View related parts
Dodge Charger Sensor-Map
Part Number: 56028562AB
$31.70 MSRP: $45.80
You Save: $14.10 (31%)
ADD TO CART
Product Specifications
- Other Name: Sensor Map; M.A.P. Sensor, Map Sensor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006 Dodge Charger | Base RWD, R/T RWD | 8 Cyl 5.7L
View related parts
Dodge Charger Sensor-Pressure And Temperature
Part Number: 53010887AA
$39.90 MSRP: $86.20
You Save: $46.30 (54%)
ADD TO CART
Product Specifications
- Other Name: Boost Sensor, M.A.P. Sensor, Map Sensor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2022 Dodge Charger | Police RWD, SRT Hellcat RWD, SRT Hellcat Widebody RWD | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.2L, 8 Cyl 6.4 L GAS
View related parts
Dodge Charger Sensor-Map
Part Number: 68271094AB
$36.86 MSRP: $54.15
You Save: $17.29 (32%)
ADD TO CART
Product Specifications
- Other Name: M.A.P. Sensor, Map Sensor
- Replaces: 68271094AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2023 Dodge Charger | Police RWD, R/T 392 RWD, SRT 392 RWD, SRT Hellcat Widebody RWD, Scat Pack RWD | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS, 8 Cyl 6.4L
View related parts
Dodge Charger Air Pressure
Part Number: 5038851AC
$88.77 MSRP: $135.00
You Save: $46.23 (35%)
ADD TO CART
Product Specifications
- Replaces: 5038851AB, 5038851AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2023 Dodge Charger | Police RWD, SRT Hellcat RWD, SRT Hellcat Widebody RWD | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.2L, 8 Cyl 6.4 L GAS
View related parts
Dodge Charger MAP
Part Number: 68371847AB
$38.12 MSRP: $56.05
You Save: $17.93 (32%)
ADD TO CART
Product Specifications
- Other Name: M.A.P. Sensor, Map Sensor
- Replaces: 5149174AA, 5149174AB, 68371847AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2023 Dodge Charger | GT AWD, GT RWD, Police RWD, SE AWD, SE RWD, SRT Hellcat Widebody RWD, SXT AWD, SXT Plus RWD, SXT RWD, V6 AWD | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6L, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Charger Sensor-Map
Part Number: 68199324AA
Product Specifications
- Other Name: Sensor Map
- Replaced by: 68199324AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016-2018 Dodge Charger | Police AWD, Police RWD, R/T RWD | 8 Cyl 5.7L
View related parts
Dodge Charger Sensor-Map
Part Number: 68199324AB
$41.81 MSRP: $60.60
You Save: $18.79 (32%)
Product Specifications
- Other Name: M.A.P. Sensor, Map Sensor
- Replaces: 5033310AC, 68199324AA, 5149091AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2023 Dodge Charger | Base AWD, Base RWD, Police AWD, Police RWD, R/T AWD, R/T RWD, Rallye AWD, Rallye RWD, SRT Hellcat Widebody RWD, SXT AWD, SXT RWD | 6 Cyl 2.7L, 6 Cyl 3.5L, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.7L, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Charger MAP Sensor, Turbo
Part Number: 5227152
Product Specifications
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1987 Dodge Charger | 4 Cyl 2.2L

Dodge Charger MAP Sensor

The MAP Sensor in Dodge Charger is one of the vital pieces of equipment involved in the measurement of the positive air pressure that is admitted into the intake manifold. This tiny gadget sends signals to the ECU so as to regulate the fuel injectors depending on the volume of air in the cylinders in order to strike an ideal air-fuel ratio for better combustion. Most of the Dodge Charger models use the MAP Sensor in naturally aspirated engines and the forced induction engines may use both MAP and mass airflow (MAF) sensors. Cooperating with an intake air temperature (IAT) sensor, the MAP Sensor increases its effectiveness in the data-to-air mass conversion. While boost sensors are used with reference to the pressure set above a certain limit, the MAP Sensor in Dodge Charger vehicles delivers absolute pressure values requiring for accurate fuel delivery and general performance of the car.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Charger MAP Sensor at great affordable prices. Moreover, all genuine Dodge Charger MAP Sensor come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Charger MAP Sensor Parts Questions & Experts Answers

Sensor-Map
56041018AD
Q: Where is the MAP Sensor Located on a Dodge Charger?
A: To remove the MAP sensor on a V6 engine, unlock and disconnect the electrical connector, then rotate the sensor counterclockwise 1/4-turn and pull it out. Inspect the 0-ring and replace if necessary. To install, reverse the removal steps. On a V8 engine, the MAP sensor is located near the firewall. Disconnect the electrical connector, rotate the sensor 1/4-turn counterclockwise and remove it. Inspect the 0-ring and replace if necessary. To install, place it in position, insert it into the mounting hole and turn it 1/4-turn clockwise. Reverse the removal steps to complete installation.