How Do You Replace a Power Steering Gear Boot on Dodge Charger?

Loosen the wheel lug nuts, raise the front of the vehicle and support it securely on jackstands. Remove the wheel. Remove the tie-rod end and jam nut. Remove the rack and pinion boot clamps and slide the boot off. Check for the presence of power steering fluid in the boot. If there is a substantial amount, it means the rack and pinion seals are leaking and the rack and pinion gear should be replaced with a new or rebuilt unit. Before installing the new boot, wrap the threads and serrations on the end of the steering rod with a layer of tape so the small end of the new boot isn't damaged. Slide the new boot into position on the rack and pinion gear until it seats in the grooves, then install new clamps. Remove the tape and install the tie-rod end. Install the wheel and lug nuts. Lower the vehicle and tighten the lug nuts. Have the front end alignment checked and, if necessary, adjusted.

Genuine Dodge Charger Rack and Pinion Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Rack and Pinion Boots found

View related parts
Dodge Charger Boot-Steering Gear
Part Number: 68028832AA
$10.24 MSRP: $15.15
You Save: $4.91 (33%)
ADD TO CART
Product Specifications
- Other Name: Boot Steering Gear; Boot
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Dodge Charger | Base RWD, R/T AWD, R/T RWD, SRT8 RWD | 6 Cyl 2.7L, 6 Cyl 3.5L, 8 Cyl 5.7L, 8 Cyl 6.1L
View related parts
Dodge Charger Boot-Steering Gear
Part Number: 68028833AA
$9.99 MSRP: $14.85
You Save: $4.86 (33%)
ADD TO CART
Product Specifications
- Other Name: Boot Steering Gear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Dodge Charger | Base AWD, Base RWD | 6 Cyl 2.7L, 6 Cyl 3.5L
View related parts
Dodge Charger Boot-Steering Gear
Part Number: 68263723AA
$24.06 MSRP: $35.45
You Save: $11.39 (33%)
ADD TO CART
Product Specifications
- Other Name: Boot Kit Steering Gear; Boot, Boot Kit, Tie Rod Boot
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2021-2023 Dodge Charger | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
- 2015-2019 Dodge Charger | GT AWD, GT RWD, Police RWD, R/T 392 RWD, R/T RWD, SE AWD, SE RWD, SRT 392 RWD, SRT RWD, SXT AWD, SXT Plus RWD, SXT RWD, Scat Pack RWD | 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.4L

Dodge Charger Rack and Pinion Boot

As already highlighted, the Rack and Pinion Boot that is installed on Dodge Charger automobiles plays a terrific job of protecting the steering rack from any contamination. This is a rubber part which provides closure on two ends of the rack to secure the interior of it and its mechanisms. Damage or cracking on Rack and Pinion Boot increases vulnerability on rack and pinion system, which makes it fail. There are many styles of Rack and Pinion Boot used in Dodge Charger models over the years although descriptions of differences between these types is missing. The primary function remains consistent across all versions: to protect the steering mechanism from objects which might interfere with its performance and hence protect the steering system integrity. The Rack and Pinion Boot should be maintained properly so that the Dodge Charger's steering systems does not degrade fast.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Charger Rack and Pinion Boot at great affordable prices. Moreover, all genuine Dodge Charger Rack and Pinion Boot come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Charger Rack and Pinion Boot Parts Questions & Experts Answers

Boot-Steering Gear
68028833AA
Q: How Do You Replace a Power Steering Gear Boot on Dodge Charger?
A: Loosen the wheel lug nuts, raise the front of the vehicle and support it securely on jackstands. Remove the wheel. Remove the tie-rod end and jam nut. Remove the rack and pinion boot clamps and slide the boot off. Check for the presence of power steering fluid in the boot. If there is a substantial amount, it means the rack and pinion seals are leaking and the rack and pinion gear should be replaced with a new or rebuilt unit. Before installing the new boot, wrap the threads and serrations on the end of the steering rod with a layer of tape so the small end of the new boot isn't damaged. Slide the new boot into position on the rack and pinion gear until it seats in the grooves, then install new clamps. Remove the tape and install the tie-rod end. Install the wheel and lug nuts. Lower the vehicle and tighten the lug nuts. Have the front end alignment checked and, if necessary, adjusted.