How to remove and install Clutch Master Cylinder and Clutch Slave Cylinder on Dodge Dakota?

First of all, to service the clutch release system, disconnect the negative battery terminal and remove the clip attaching the clutch master cylinder pushrod to the clutch pedal. Inspect and replace the bushing if needed. Unplug the clutch pedal position switch and secure the clutch fluid reservoir cap. Remove the reservoir nuts and the clutch master cylinder mounting nuts. Detach the cylinder from the firewall and secure it. Raise the vehicle, remove the release cylinder mounting nuts, and detach it from the transmission. If replacing the entire system, lift it from the engine compartment. Reverse these steps to install.

Genuine Dodge Dakota Clutch Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Clutch Master Cylinders found

View related parts
Dodge Dakota Cylinder-Clutch Master Cylinder
Part Number: 4883517AA
$201.73 MSRP: $233.00
You Save: $31.27 (14%)
ADD TO CART
Product Specifications
- Other Name: Hydraulic Assembly Clutch Master Cylinder; Clutch Assembly
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997 Dodge Dakota | Club Cab 2WD, Club Cab 4WD, Regular Cab 2WD, Regular Cab 4WD | 8 Cyl 5.2L
View related parts
Dodge Dakota Hydraulic Control-Clutch Master Cylinder
Part Number: 5072482AA
$338.80 MSRP: $517.00
You Save: $178.20 (35%)
ADD TO CART
Product Specifications
- Other Name: Hydraulic Assembly Clutch Master Cylinder; Clutch Assembly
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2003 Dodge Dakota | Club Cab 2WD, Club Cab 4WD, Quad Cab 2WD, Quad Cab 4WD, Regular Cab 2WD, Regular Cab 4WD, SLT Club Cab 2WD, SLT Club Cab 4WD, SLT Quad Cab 2WD, SLT Quad Cab 4WD, SLT Regular Cab 2WD, SLT Regular Cab 4WD, Sport Club Cab 2WD, Sport Club Cab 4WD, Sport Quad Cab 2WD, Sport Quad Cab 4WD, Sport Regular Cab 2WD, Sport Regular Cab 4WD | 4 Cyl 2.5L, 6 Cyl 3.9L, 8 Cyl 4.7L
View related parts
Dodge Dakota Hydraulic Control-Clutch Master And Slave Cylinder
Part Number: 5134623AA
$332.76 MSRP: $494.00
You Save: $161.24 (33%)
ADD TO CART
Product Specifications
- Other Name: Hydraulic Assembly Clutch Master Cylinder
- Replaced by: 5134623AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004 Dodge Dakota | Club Cab 2WD, Club Cab 4WD, Regular Cab 2WD, Regular Cab 4WD, SLT Club Cab 2WD, SLT Club Cab 4WD, SLT Quad Cab 2WD, SLT Quad Cab 4WD, SLT Regular Cab 2WD, SLT Regular Cab 4WD, Sport Club Cab 2WD, Sport Club Cab 4WD, Sport Quad Cab 2WD, Sport Quad Cab 4WD, Sport Regular Cab 2WD, Sport Regular Cab 4WD | 6 Cyl 3.7L, 8 Cyl 4.7L
View related parts
Dodge Dakota Hydraulic Control-Clutch Master And Slave Cylinder
Part Number: 5134623AB
$332.76 MSRP: $494.00
You Save: $161.24 (33%)
ADD TO CART
Product Specifications
- Other Name: Hydraulic Assembly Clutch Master Cylinder
- Replaced by: 5134623AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005 Dodge Dakota | Laramie Club Cab 2WD, Laramie Club Cab 4WD, Laramie Quad Cab 2WD, Laramie Quad Cab 4WD, SLT Club Cab 2WD, SLT Club Cab 4WD, SLT Quad Cab 2WD, SLT Quad Cab 4WD, ST Club Cab 2WD, ST Club Cab 4WD, ST Quad Cab 2WD, ST Quad Cab 4WD | 6 Cyl 3.7L, 8 Cyl 4.7L
View related parts
Dodge Dakota Hydraulic Control-Clutch Master Cylinder
Part Number: 4883516AC
$161.12 MSRP: $205.02
You Save: $43.90 (22%)
ADD TO CART
Product Specifications
- Other Name: Hydraulic Assembly Clutch Master Cylinder; Clutch Assembly
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Dodge Dakota | Club Cab 2WD, Club Cab 4WD, Quad Cab 2WD, Quad Cab 4WD, Regular Cab 2WD, Regular Cab 4WD | 4 Cyl 2.5L
View related parts
Dodge Dakota Cylinder-Clutch Master Cylinder
Part Number: 5134623AE
Product Specifications
- Other Name: Hydraulic Assembly Clutch Master Cylinder; Actuator Assembly, Clutch Assembly
- Replaces: 5134623AA, 5134623AD, 5134623AB, 5134623AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2009 Dodge Dakota | Club Cab 2WD, Club Cab 4WD, Laramie Club Cab 2WD, Laramie Club Cab 4WD, Laramie Extended Cab 2WD, Laramie Extended Cab 4WD, Laramie Quad Cab 2WD, Laramie Quad Cab 4WD, Regular Cab 2WD, Regular Cab 4WD, SLT Club Cab 2WD, SLT Club Cab 4WD, SLT Crew Cab 2WD, SLT Crew Cab 4WD, SLT Extended Cab 2WD, SLT Extended Cab 4WD, SLT Quad Cab 2WD, SLT Quad Cab 4WD, SLT Regular Cab 2WD, SLT Regular Cab 4WD, ST Club Cab 2WD, ST Club Cab 4WD, ST Crew Cab 2WD, ST Crew Cab 4WD, ST Extended Cab 2WD, ST Extended Cab 4WD, ST Quad Cab 2WD, ST Quad Cab 4WD, SXT Crew Cab 2WD, SXT Crew Cab 4WD, SXT Extended Cab 2WD, SXT Extended Cab 4WD, Sport Club Cab 2WD, Sport Club Cab 4WD, Sport Crew Cab 2WD, Sport Crew Cab 4WD, Sport Extended Cab 2WD, Sport Extended Cab 4WD, Sport Quad Cab 2WD, Sport Quad Cab 4WD, Sport Regular Cab 2WD, Sport Regular Cab 4WD, TRX Crew Cab 2WD, TRX Crew Cab 4WD, TRX Extended Cab 2WD, TRX Extended Cab 4WD | 6 Cyl 3.7L, 8 Cyl 4.7L
View related parts
Dodge Dakota Hydraulic Assembly Clutch Master Cylinder
Part Number: 4883516AB
Product Specifications
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-1999 Dodge Dakota | Club Cab 2WD, Club Cab 4WD, Regular Cab 2WD, Regular Cab 4WD | 4 Cyl 2.5L, 6 Cyl 3.9L
View related parts
Dodge Dakota Hydraulic Control-Clutch Master Cylinder
Part Number: 4883517AC
Product Specifications
- Other Name: Hydraulic Assembly Clutch Master Cylinder; Clutch Assembly
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Dodge Dakota | Club Cab 2WD, Club Cab 4WD, Quad Cab 2WD, Quad Cab 4WD, Regular Cab 2WD, Regular Cab 4WD | 6 Cyl 3.9L, 8 Cyl 4.7L
View related parts
Dodge Dakota Cylinder-Clutch Master Cylinder
Part Number: 4883516AA
Product Specifications
- Other Name: Hydraulic Assembly Clutch Master Cylinder; Clutch Assembly
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997 Dodge Dakota | Club Cab 2WD, Club Cab 4WD, Regular Cab 2WD, Regular Cab 4WD | 4 Cyl 2.5L, 6 Cyl 3.9L

Dodge Dakota Clutch Master Cylinder

In models of Dodge Dakota vehicles, Clutch Master Cylinder is used to develop requisite hydraulic pressure that can affect the clutch operation in the manual transmission cars. Whenever the driver activates the clutch pedal, hydraulic pressure from Clutch Master Cylinder is transmitted to the slave cylinder thus enabling the release bearing to retract and freeing the clutch from the flywheel. This hydraulic mechanism is helpful for shifting of gears and the general performance of the transmission. Dodge Dakota might have gone through various generations of the vehicle and it is important to check the style of Clutch Master Cylinder so as to determine the amount of performance and durability of the automobile. Some of the standard problems related to Clutch Master Cylinder are as below: Fluid leaks in some cases, especially when the seals of the cylinder bores are worn out or have weakened then the fluid pressure and the clutch pedal with spongy or soft feeling and difficult to shift gears. The Clutch Master Cylinder plays a great role in the proper functioning of the transmission system of the Dodge Dakota, therefore, servicing it should always be a priority.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Dakota Clutch Master Cylinder at great affordable prices. Moreover, all genuine Dodge Dakota Clutch Master Cylinder come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Dakota Clutch Master Cylinder Parts Questions & Experts Answers

Hydraulic Control-Clutch Master And Slave Cylinder
5134623AB
Q: How to remove and install Clutch Master Cylinder and Clutch Slave Cylinder on Dodge Dakota?
A: First of all, to service the clutch release system, disconnect the negative battery terminal and remove the clip attaching the clutch master cylinder pushrod to the clutch pedal. Inspect and replace the bushing if needed. Unplug the clutch pedal position switch and secure the clutch fluid reservoir cap. Remove the reservoir nuts and the clutch master cylinder mounting nuts. Detach the cylinder from the firewall and secure it. Raise the vehicle, remove the release cylinder mounting nuts, and detach it from the transmission. If replacing the entire system, lift it from the engine compartment. Reverse these steps to install.

Related Dodge Dakota Parts

Browse by Year

2009 Clutch Master Cylinder 2008 Clutch Master Cylinder 2007 Clutch Master Cylinder 2006 Clutch Master Cylinder 2005 Clutch Master Cylinder 2004 Clutch Master Cylinder 2003 Clutch Master Cylinder 2002 Clutch Master Cylinder 2001 Clutch Master Cylinder 2000 Clutch Master Cylinder 1999 Clutch Master Cylinder 1998 Clutch Master Cylinder 1997 Clutch Master Cylinder