How to remove and install Crankshaft Pulley and Harmonic Balancer in 3.7L V6 and 4.7L V8 engine on Dodge Dakota?

Remove the cable far from the negative terminal of the battery. Disassembly process involves the following: Erase the system cooling fans and also the shroud. Remove the drivebelts and rotate the belt tensioner in the opposite direction to the crankshaft pulley. Coil the strap wrench or chain wrench around the crankshaft pulley and while pulling it with your hand, place a breaker bar and socket on the crankshaft pulley center bolt and turn it counterclockwise until it's loose. For this, there are specific holes provided in the crankshaft and pulley and using a puller use the jaws of the puller in such a way that they grip the hub of the pulley only and not the outer ring, at the same time check that the puller screw does not go into the threads present in the nose of the crankshaft. Examine the oil seal riding surface on the pulley hub; if the surface has been grooved out, an oil seal sleeve may be available which will fit on to the hub and renew the sealing surface and this can be fitted with a hammer and a block of wood. Coat the portion of the hub of the pulley with clean engine oil, ensure that the groove in the pulley is properly engaged with the key on the crankshaft, insert the crankshaft pulley over the crank shaft as far as it may go to be followed by the use of a vibration damper installation tool in forcing it the rest of the way. Replace the crankshaft pulley retaining bolt and tighten it to the recommend torque. The rest of the installation is done in the reverse sequence of what was followed to remove it.

Genuine Dodge Dakota Crankshaft Pulley

Crankshaft Pulley Engine Harmonic Balancer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Crankshaft Pulleys found

View related parts
Dodge Dakota DAMPER-CRANKSHAFT
Part Number: 53022162AA
$558.06 MSRP: $717.00
You Save: $158.94 (23%)
ADD TO CART
Product Specifications
- Other Name: DAMPER Crankshaft; Crankshaft Damper, Pulley, Vibration Damper
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2011 Dodge Dakota | Laramie Crew Cab 2WD, Laramie Crew Cab 4WD, Laramie Extended Cab 2WD, Laramie Extended Cab 4WD, SLT Club Cab 2WD, SLT Club Cab 4WD, SLT Crew Cab 2WD, SLT Crew Cab 4WD, SLT Extended Cab 2WD, SLT Extended Cab 4WD, Sport Crew Cab 4WD, Sport Extended Cab 2WD, Sport Extended Cab 4WD, ST Club Cab 2WD, ST Crew Cab 2WD, ST Crew Cab 4WD, ST Extended Cab 2WD, ST Extended Cab 4WD, SXT Crew Cab 2WD, SXT Crew Cab 4WD, SXT Extended Cab 2WD, SXT Extended Cab 4WD, TRX Crew Cab 4WD, TRX Extended Cab 2WD, TRX Extended Cab 4WD | 8 Cyl 4.7L
View related parts
Dodge Dakota DAMPER-CRANKSHAFT
Part Number: 53020229
Product Specifications
- Other Name: DAMPER, Vibration; Pulley, Vibration Damper
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1990-2003 Dodge Dakota | 3-Person Cab 2WD, 3-Person Cab 4WD, Club Cab 2WD, Club Cab 4WD, Quad Cab 2WD, Quad Cab 4WD, Regular Cab 2WD, Regular Cab 4WD, SLT Club Cab 2WD, SLT Club Cab 4WD, SLT Quad Cab 2WD, SLT Quad Cab 4WD, SLT Regular Cab 2WD, SLT Regular Cab 4WD, Sport Club Cab 2WD, Sport Club Cab 4WD, Sport Quad Cab 2WD, Sport Quad Cab 4WD, Sport Regular Cab 2WD, Sport Regular Cab 4WD | 6 Cyl 3.9L, 8 Cyl 5.2L
View related parts
Dodge Dakota DAMPER-CRANKSHAFT
Part Number: 53020689AB
$129.72 MSRP: $193.00
You Save: $63.28 (33%)
Product Specifications
- Other Name: DAMPER Crankshaft; Crankshaft Damper, Pulley, Vibration Damper
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2011 Dodge Dakota | Club Cab 2WD, Club Cab 4WD, Laramie Club Cab 2WD, Laramie Club Cab 4WD, Laramie Crew Cab 2WD, Laramie Crew Cab 4WD, Laramie Quad Cab 2WD, Laramie Quad Cab 4WD, Quad Cab 2WD, Quad Cab 4WD, Regular Cab 2WD, Regular Cab 4WD, SLT Club Cab 2WD, SLT Club Cab 4WD, SLT Crew Cab 2WD, SLT Crew Cab 4WD, SLT Extended Cab 2WD, SLT Extended Cab 4WD, SLT Quad Cab 2WD, SLT Quad Cab 4WD, SLT Regular Cab 2WD, SLT Regular Cab 4WD, Sport Club Cab 2WD, Sport Club Cab 4WD, Sport Crew Cab 2WD, Sport Crew Cab 4WD, Sport Extended Cab 2WD, Sport Extended Cab 4WD, Sport Quad Cab 2WD, Sport Quad Cab 4WD, Sport Regular Cab 2WD, Sport Regular Cab 4WD, ST Club Cab 2WD, ST Club Cab 4WD, ST Crew Cab 2WD, ST Crew Cab 4WD, ST Extended Cab 2WD, ST Extended Cab 4WD, ST Quad Cab 2WD, ST Quad Cab 4WD, SXT Crew Cab 2WD, SXT Crew Cab 4WD, SXT Extended Cab 2WD, SXT Extended Cab 4WD, TRX Crew Cab 2WD, TRX Crew Cab 4WD, TRX Extended Cab 2WD, TRX Extended Cab 4WD | 6 Cyl 3.7L, 8 Cyl 4.7L
View related parts
Dodge Dakota DAMPER-CRANKSHAFT
Part Number: 53021284AA
Product Specifications
- Other Name: DAMPER Crankshaft; Pulley, Vibration Damper
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2003 Dodge Dakota | Club Cab 2WD, Club Cab 4WD, Quad Cab 2WD, Quad Cab 4WD, R/T Club Cab 2WD, R/T Regular Cab 2WD, Regular Cab 2WD, Regular Cab 4WD, SLT Club Cab 2WD, SLT Club Cab 4WD, SLT Quad Cab 2WD, SLT Quad Cab 4WD, SLT Regular Cab 2WD, SLT Regular Cab 4WD, Sport Club Cab 2WD, Sport Club Cab 4WD, Sport Quad Cab 2WD, Sport Quad Cab 4WD, Sport Regular Cab 2WD, Sport Regular Cab 4WD | 8 Cyl 5.9L
View related parts
Dodge Dakota PULLEY Asm Drive
Part Number: 3870074
Product Specifications
- Other Name: PULLEY, Drive; Crankshaft Pulley, Idler Pulley, Pulley
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1987-1993 Dodge Dakota | 3-Person Cab 2WD, 3-Person Cab 4WD, Club Cab 2WD, Club Cab 4WD | 6 Cyl 3.9L
View related parts
Dodge Dakota DAMPER
Part Number: 4173443
Product Specifications
- Other Name: DAMPER, Vibration; Vibration Damper
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1987-1993 Dodge Dakota | 3-Person Cab 2WD, 3-Person Cab 4WD, Club Cab 2WD, Club Cab 4WD | 6 Cyl 3.9L, 8 Cyl 5.2L
View related parts
Dodge Dakota Pulley-Crankshaft
Part Number: 53010222
Product Specifications
- Other Name: PULLEY Crankshaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-2003 Dodge Dakota | 3-Person Cab 2WD, 3-Person Cab 4WD, Club Cab 2WD, Club Cab 4WD, Quad Cab 2WD, Quad Cab 4WD, Regular Cab 2WD, Regular Cab 4WD, SLT Club Cab 2WD, SLT Club Cab 4WD, SLT Quad Cab 2WD, SLT Quad Cab 4WD, SLT Regular Cab 2WD, SLT Regular Cab 4WD, Sport Club Cab 2WD, Sport Club Cab 4WD, Sport Quad Cab 2WD, Sport Quad Cab 4WD, Sport Regular Cab 2WD, Sport Regular Cab 4WD | 6 Cyl 3.9L, 8 Cyl 5.2L, 8 Cyl 5.9L
View related parts
Dodge Dakota DAMPER-CRANKSHAFT
Part Number: 53021410AA
Product Specifications
- Other Name: DAMPER Crankshaft; Pulley, Vibration Damper
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2006 Dodge Dakota | Laramie Club Cab 2WD, Laramie Club Cab 4WD, Laramie Quad Cab 2WD, Laramie Quad Cab 4WD, SLT Club Cab 2WD, SLT Club Cab 4WD, SLT Quad Cab 2WD, SLT Quad Cab 4WD, ST Club Cab 2WD, ST Club Cab 4WD, ST Quad Cab 2WD, ST Quad Cab 4WD | 8 Cyl 4.7L
View related parts
Dodge Dakota DAMPER-CRANKSHAFT
Part Number: 33002879AB
Product Specifications
- Other Name: DAMPER Crankshaft; Crankshaft Damper, Pulley, Vibration Damper
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Dodge Dakota | Club Cab 2WD, Club Cab 4WD, Quad Cab 2WD, Quad Cab 4WD, Regular Cab 2WD, Regular Cab 4WD, SLT Club Cab 2WD, SLT Club Cab 4WD, SLT Quad Cab 2WD, SLT Quad Cab 4WD, SLT Regular Cab 2WD, SLT Regular Cab 4WD, Sport Club Cab 2WD, Sport Club Cab 4WD, Sport Quad Cab 2WD, Sport Quad Cab 4WD, Sport Regular Cab 2WD, Sport Regular Cab 4WD | 4 Cyl 2.5L
View related parts
Dodge Dakota DAMPER-CRANKSHAFT
Part Number: 53022018AA
Product Specifications
- Other Name: DAMPER Crankshaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Dodge Dakota | Laramie Club Cab 2WD, Laramie Club Cab 4WD, Laramie Quad Cab 2WD, Laramie Quad Cab 4WD, SLT Club Cab 2WD, SLT Club Cab 4WD, SLT Quad Cab 2WD, SLT Quad Cab 4WD, ST Club Cab 2WD, ST Club Cab 4WD, ST Quad Cab 2WD, ST Quad Cab 4WD | 8 Cyl 4.7L
View related parts
Dodge Dakota PULLEY-V-Belt Drive
Part Number: 4483413
Product Specifications
- Other Name: PULLEY, Drive; Crankshaft Damper, Crankshaft Pulley, Pulley
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1988-1996 Dodge Dakota | 3-Person Cab 2WD, 3-Person Cab 4WD, Club Cab 2WD, Club Cab 4WD, Regular Cab 2WD | 4 Cyl 2.2L, 4 Cyl 2.5L

Dodge Dakota Crankshaft Pulley

The Performance Crankshaft Pulley in Dodge Dakota plays an important function to deliver the maximal power from the engine to complementing parts including the power steering pump, A/C compressor, and alternator. Powered by the crankshaft torque, the Performance Crankshaft Pulley improves general performance and, at the same time, eliminates vibrations for which it also has the name of the harmonic balance wheel. There has been a succession of Performance Crankshaft Pulley for the Dodge Dakota over the years with each style majoring in power delivery and weight reduction. These variations could be based on material used and the design of the respective tools, this therefore has a bearing on the efficiency of the performance enhancement. Thus, the Performance Crankshaft Pulley is a significant component of a Dodge Dakota vehicle since it affects its operation to have a better drive.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Dakota Crankshaft Pulley at great affordable prices. Moreover, all genuine Dodge Dakota Crankshaft Pulley come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Dakota Crankshaft Pulley Parts Questions & Experts Answers

DAMPER-CRANKSHAFT
53021410AA
Q: How to remove and install Crankshaft Pulley and Harmonic Balancer in 3.7L V6 and 4.7L V8 engine on Dodge Dakota?
A: Remove the cable far from the negative terminal of the battery. Disassembly process involves the following: Erase the system cooling fans and also the shroud. Remove the drivebelts and rotate the belt tensioner in the opposite direction to the crankshaft pulley. Coil the strap wrench or chain wrench around the crankshaft pulley and while pulling it with your hand, place a breaker bar and socket on the crankshaft pulley center bolt and turn it counterclockwise until it's loose. For this, there are specific holes provided in the crankshaft and pulley and using a puller use the jaws of the puller in such a way that they grip the hub of the pulley only and not the outer ring, at the same time check that the puller screw does not go into the threads present in the nose of the crankshaft. Examine the oil seal riding surface on the pulley hub; if the surface has been grooved out, an oil seal sleeve may be available which will fit on to the hub and renew the sealing surface and this can be fitted with a hammer and a block of wood. Coat the portion of the hub of the pulley with clean engine oil, ensure that the groove in the pulley is properly engaged with the key on the crankshaft, insert the crankshaft pulley over the crank shaft as far as it may go to be followed by the use of a vibration damper installation tool in forcing it the rest of the way. Replace the crankshaft pulley retaining bolt and tighten it to the recommend torque. The rest of the installation is done in the reverse sequence of what was followed to remove it.