×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Dodge Dakota Lash Adjuster
Lash Adjuster Lifter- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
5 Lash Adjusters found
Dodge Dakota Engine Valve Lash Tappet
Part Number: 68045795AA$40.49 MSRP: $60.25You Save: $19.76 (33%)
Dodge Dakota Engine Valve Lifter-Adjuster
Part Number: 53021894AA$41.04 MSRP: $60.25You Save: $19.21 (32%)
Dodge Dakota Lash Adjuster
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Dakota Lash Adjuster at great affordable prices. Moreover, all genuine Dodge Dakota Lash Adjuster come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Dodge Dakota Lash Adjuster Parts Questions & Experts Answers
- Q: How do you remove and reinstall rocker arms and lash adjusters in 3.7L V6 and 4.7L V8 engine on Dodge Dakota?A: A special valve spring compressor from most aftermarket specialty tool manufacturers is required for this procedure, as the only alternative involves major disassembly of the engine and surrounding components by removing the Timing Chains and camshafts. This engine is a non-freewheeling (interference) engine, necessitating that the pistons be down in the cylinder bore before compressing the valve and spring assembly to allow for rocker arm removal. Before starting, ensure the transmission is in Park, the parking brake is applied, or the rear wheels are blocked, and remove the ignition coils and spark plugs. Remove the valve cover(s) and label and store the rocker arms and lash adjusters for reinstallation on the same valves. Rotate the engine clockwise by the crankshaft pulley/vibration damper bolt until the pistons are positioned correctly for rocker arm removal, starting from TDC number 1 on the compression stroke. For the 3.7L V6 engine, remove rocker arms from cylinders No. 2 and 6 with the No. 1 piston at TDC, then rotate the crankshaft another 180 degrees to remove the rocker arm from cylinder No. 1, followed by cylinders No. 3 and 5, and finally cylinder No. 4. For the 4.7L V8 engine, follow a similar process, removing rocker arms from cylinders No. 2 and 8, then No. 3 and 5, followed by No. 4 and 6, and finally No. 1 and 7. Use the valve spring compressor to relieve tension on the rocker arm for removal, and if only a few rocker arms or lash adjusters are being replaced, locate the corresponding cylinder number and rotate the crankshaft accordingly. After removing the rocker arms, pull out the lash adjusters and store them with their corresponding rocker arms. Inspect each rocker arm for wear, cracks, and damage, ensuring the rollers turn freely, and check the lash adjuster contact surfaces for wear or damage, confirming they move freely without excessive play. Installation is the reverse of removal, ensuring lash adjusters are installed first and are at least partially full of oil to minimize plunger travel.
Related Dodge Dakota Parts
Browse by Year
2011 Lash Adjuster 2010 Lash Adjuster 2009 Lash Adjuster 2008 Lash Adjuster 2007 Lash Adjuster 2006 Lash Adjuster 2005 Lash Adjuster 2004 Lash Adjuster 2003 Lash Adjuster 2002 Lash Adjuster 2001 Lash Adjuster 2000 Lash Adjuster 1999 Lash Adjuster 1998 Lash Adjuster 1997 Lash Adjuster 1996 Lash Adjuster 1995 Lash Adjuster 1994 Lash Adjuster 1993 Lash Adjuster 1992 Lash Adjuster