×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Dodge Dakota Shift Cable
Transmission Shift Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
5 Shift Cables found
Dodge Dakota Transmission Shift Cable/Automatic Transmission Shifter Cable
Part Number: 52110005AJ$142.37 MSRP: $198.00You Save: $55.63 (29%)
Dodge Dakota Transmission Shift Cable
Part Number: 52110005AG$130.98 MSRP: $198.00You Save: $67.02 (34%)
Dodge Dakota Transmission Shift Cable
Part Number: 52110005AI$130.98 MSRP: $198.00You Save: $67.02 (34%)
Dodge Dakota Transmission Shift Cable
Part Number: 52110005AE$27.32 MSRP: $39.45You Save: $12.13 (31%)
Dodge Dakota Shift Cable
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Dakota Shift Cable at great affordable prices. Moreover, all genuine Dodge Dakota Shift Cable come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Dodge Dakota Shift Cable Parts Questions & Experts Answers
- Q: How do you properly adjust the shift cable and troubleshoot the Transmission Range (TR) sensor on Dodge Dakota?A: Firmly apply the parking brake and try to momentarily operate the starter in each shift lever position; it should only operate when the shift lever is in PARK or NEUTRAL. If it operates in any other position, adjust the shift cable. If the issue persists after adjustment, the Transmission Range (TR) sensor may be defective. To adjust the shift cable, place the shift lever in PARK, remove the knee bolster, and release the shift cable adjuster lock tab. Raise the vehicle securely on jackstands, ensuring the rear is also elevated to turn the driveshaft. At the transmission end of the cable, pry the cable end off the manual shift lever and verify that the manual shift lever is fully in the PARK position. Check that the park lock pawl is engaged by attempting to rotate the driveshaft, which should not move if correctly engaged. Reconnect the shift cable to the manual shift lever, lower the vehicle, and ensure the engine starts with the parking brake applied. Snap the cable adjuster lock tab into place, and if the starter still operates in positions other than PARK and NEUTRAL, replace the Transmission Range (TR) sensor. For replacement, ensure the shift lever is in PARK, raise the vehicle securely, pry the cable end off the manual shift lever, lower the vehicle, and remove the knee bolster and steering column covers. Remove the shift cable grommet from the firewall, disconnect the electrical connector from the Brake Transmission Shift Interlock (BTSI) solenoid, and pry the cable end off the lever on the steering column. To disengage the cable assembly from the lower steering column bracket, squeeze the two tangs on the cable housing and pull the assembly straight down, then remove the grommet from the firewall and pull the cable through. Installation is the reverse of removal, followed by adjusting the cable.
