How do you remove and install a door latch assembly on Dodge Daytona?

Lower the window and, for electric window models, disconnect the negative battery cable. Remove the door trim panel and partially peel back the liner to access the outside handle access hole. Temporarily install the window crank for manual windows or connect the battery for electric windows to raise the window, then disconnect the negative battery cable again for electric windows. Disconnect all links at the latch by prying the clip off the rod and rotating it to disengage the link. Remove the three Torx screws from the door end panel and detach the latch assembly; for electric window models, drill out the two rivets retaining the lock motor to the door and remove the motor along with the latch. Installation is the reverse of removal, using two short 1/4-20 bolts and nuts to replace the rivets holding the motor to the door for electric window models.

Genuine Dodge Daytona Door Latch Assembly

Door Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Door Latch Assemblys found

View related parts
Dodge Daytona Latch Front Door Non Override
Part Number: 4396246
$76.31 MSRP: $97.10
You Save: $20.79 (22%)
ADD TO CART
Product Specifications
- Other Name: Latch, Door; Latch, Lock
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1988-1990 Dodge Daytona | 4 Cyl 2.2L, 4 Cyl 2.5L, 6 Cyl 3.0L
View related parts
Dodge Daytona Latch-Assembly-Front Dr-Override-Lt
Part Number: 4396249
Product Specifications
- Other Name: Latch, Door; Latch, Lock
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1988-1993 Dodge Daytona | Base, ES, IROC, IROC R/T | 4 Cyl 2.2L, 4 Cyl 2.5L, 6 Cyl 3.0L
View related parts
Dodge Daytona Latch-Front Dr-O/RIDE-Lt
Part Number: 4336377
Product Specifications
- Other Name: Latch, Front Door; Latch, Latch Assembly, Lock
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1985-1987 Dodge Daytona | 4 Cyl 2.2L, 4 Cyl 2.5L
View related parts
Dodge Daytona Latch-Front Dr-Non O/RIDE Right
Part Number: 4336378
Product Specifications
- Other Name: Latch, Front Door; Latch, Latch Assembly, Lock
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1985-1987 Dodge Daytona | 4 Cyl 2.2L, 4 Cyl 2.5L
View related parts
Dodge Daytona Latch Front Door Right Override
Part Number: 4615382
Product Specifications
- Other Name: Latch, Door; Hinge, Latch, Lock
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1991-1993 Dodge Daytona | Base, ES, IROC, IROC R/T | 4 Cyl 2.2L, 4 Cyl 2.5L, 6 Cyl 3.0L

Dodge Daytona Door Latch Assembly

Door Latch Assembly in vehicle models such as Dodge Daytona plays the role of locking the doors and thus cannot allow any persons to access the interior of the car. This assembly can either be operated by hand the doors or be programmed to lock or unlock each door centrally. Durability is an aspect that has been given a lot of consideration in the creation of the Dodge Daytona Door Latch Assembly, however, General motors have been known to replace it from time to time because of on-and-off problems such as faulty outer door handles or rodenthole sticking mechanisms. Over the years, there have been different designs of Door Latch Assembly in the Dodge Daytona designs in order to improve on the smooth and safe operation of the door. These assemblies may differ in a way because of the kind of locking systems used that may affect the performance of the assembly and the customer. In general, the Door Latch Assembly is still a critical part in sustaining the solidity and protection of the Dodge Daytona.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Daytona Door Latch Assembly at great affordable prices. Moreover, all genuine Dodge Daytona Door Latch Assembly come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Daytona Door Latch Assembly Parts Questions & Experts Answers

Latch-Assembly-Front Dr-Override-Lt
4396249
Q: How do you remove and install a door latch assembly on Dodge Daytona?
A: Lower the window and, for electric window models, disconnect the negative battery cable. Remove the door trim panel and partially peel back the liner to access the outside handle access hole. Temporarily install the window crank for manual windows or connect the battery for electric windows to raise the window, then disconnect the negative battery cable again for electric windows. Disconnect all links at the latch by prying the clip off the rod and rotating it to disengage the link. Remove the three Torx screws from the door end panel and detach the latch assembly; for electric window models, drill out the two rivets retaining the lock motor to the door and remove the motor along with the latch. Installation is the reverse of removal, using two short 1/4-20 bolts and nuts to replace the rivets holding the motor to the door for electric window models.