×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Dodge Daytona Door Lock Cylinder
Door Lock Cylinder Tumbler- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Door Lock Cylinders found
Dodge Daytona Cylinder - Door Lock Uncoded
Part Number: 4720931$29.63 MSRP: $42.80You Save: $13.17 (31%)
Dodge Daytona Door Lock Cylinder
The Door Lock Cylinder in Dodge Daytona vehicles basically provides operations of locking and unlocking the door by the use of the car key. This component is mounted on the front doors and plays a very important role of ensuring that there is access to the interior of the car is well and strongly granted. Sometimes the Door Lock Cylinder may wear out due to the constant use and it comes to a point where one can turn the key but it will not turn or it gets stuck. Contrary to many recently produced vehicles where the key based Door Lock Cylinders have been replaced with other technologies, the Dodge Daytona still employs this sort of mechanism: what works with a key, and, just like the previous type, it is advisable to replace it from time to time. It is quite significant to make sure that the Door Lock Cylinder of the Dodge Daytona to be in good shape and form for it provides the durability and commotion in achieving the right lock system of the car.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Daytona Door Lock Cylinder at great affordable prices. Moreover, all genuine Dodge Daytona Door Lock Cylinder come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Dodge Daytona Door Lock Cylinder Parts Questions & Experts Answers
- Q: How do you remove and install a door handle and lock cylinder on Dodge Daytona?A: Lower the window and disconnect the battery. Remove the door trim panel and peel back the liner to expose the rear of the major access hole. If equipped, remove the illuminated entry switch using a fabricated tool. Disconnect the handle links from the latch and the lock. Remove the two retaining nuts, pull the handle out, and take out the lock cylinder from the handle. Place the key cylinder in the handle, install the retainer, and tighten the screws securely. Install the handle in the door and tighten the nuts securely. Connect the links to the handle and the lock, then install the illuminated entry switch followed by the door trim panel.
